Tender For Advertized Rate List /Bill Of Quantity For Operationalization Of Common Labs 01-10 In Administrative Block Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fas, baramulla-Jammu And Kashmir

Tender For Advertized Rate List /Bill Of Quantity For Operationalization Of Common Labs 01-10 In Administrative Block Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood 2 Providing and fixing of 19 mm thick plywood of approved quality and make with cost of nails, screws, hinges etc All inclusive with cost of labour, materials and carriages of all involved materials complete job (face area to be measured and paid for) 3 Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures 4 Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with spar varnish on an under coat of flatting varnish 5 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. : 150x10 mm 6 125mm handle 7 Providing and fixing special quality chromium plated brass cupboard locks of approved quality with six levers including necessary screws etc. complete 50 mm 8 Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type) 9 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 10 Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 11 FURNITURE & FIXTURESWork Top 1800 x 750 x 750mm (H)With 2 DrawerBox (PreLam Board)Supplying desk with Main Table of size 1800mm x 750 x 750mm including drawer pedestal and Return unit size 1200mm x 450 x 700mm (return) unit with 18mm thick PreLaminated Particle board front sliding door lockable sides and closed back with 9ram thick PreLaminated Particle board). The Worktops shall be made of superior quality 25mm thick particle board of grade-II type II. confirming to IS: 12823 of approved shade The top 25mm thick and side panels (18mm thick Prel aminated particle board) will be claded with special post forming laminated of thickness 0.62X0.8mm Wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. All exposed edges of table shall have 2mm thick Hot melt PVC banding 12 SEAT ASSEMBLY: The seat should be made up of1.2 ± 0 1cm thick flat plywood and with moulded Polyurethane foam and should be upholstered with replaccable synthetic leather covers.SEAT SIZE Diameter 400 cm ADJUSTMENTS: 360° Revolving type2) BACK ASSEMBLY: The back foam should be designed with contoured Lumbar support for extra confort. The upholstery should be available in synthetic cather BACK SIZE: 45.0 cm (W) covered with poivurethane foam3) High RESILIENCE (HR) POLYURETHANEFOAM. The_ HR polyurethane foam should be moulded with density 45+1-2 kg/m3 and Hardness load 16± 2 kgf for 25% compressionHEIGHT ADJUSTMENT : The manual height adjustment should be very easy to operate with a help of a knob it can be easily locked at the most comfortable position.PEDESTAL ASSEMBLY The five-prong pedestalshould be fabricated from 02 ± 0.02 cm thick HR sheet! should be DD 13 Glass Door Storwel shall have an overall size of 916mm (W) x48mm (D) x 1981mm (H) with welded constrcution. It should have shelf thickness of 0.7 mm Back thickness of 0.8mm Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall have a thickness of 0.9mm. These componenets shall be made of CRCA D grade high yield strength as per IS :513 THe glass door storwel shall have a brass handle and a 2 waly locking mechanism with shooting bolt. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/-10) Plenty of colour options and shelving options shall be available. Please Enable Macros to View BoQ information

INR 1600 /-

INR 84.72 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB