Repairs To Roof Ceiling Joineries Plumbing Cjupboards And Internal Painting Of Cera Md Accn And Clenaing Of Water Tanks Of Md Accn Qtrs At Ina Ezhimala As Per Boq And Tender Documents; 1 Taking up or down steel tubing and connections, 25 or 32 mm bore incl cleaning and removal to store. 2 Taking up or down steel tubing and connections, 20 mm bore incl cleaning and removal to store. 3 Supply and fix 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. 4 Supply and fix 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. 5 Supply and fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. 6 Repair/removal of air lock in internal water supply system of pipe of any dia 7 Dismantling single layer of Mangalore pattern tiles in roofing 8 Material and labour, roof tiles Mangalore pattern interlocking at side joints, laid dry. 9 All as per item No 8 here-in-before but except tiles. 10 Material and labour, ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 using water proofing compound. 11 Preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint using UNIGLOSS deluxe multi surface paint over a coat of primer all as specified and directed by Engineer-in-Charge. 12 Preparation of old MP roof tile surfaces by cleaning the tiles and applying one coats of antifungal paint using UNIGLOSS deluxe multi surface paint all as specified and directed by Engineer-in-Charge. 13 Supply and fix anodised aluminium frame for below MP tiles in repair with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed. 14 Dismantling plain or corrugated steel sheeting / galvalume sheets, including aluminium frame any gauge, thickness as in roof covering complete. 15 Pre-painted galvalume aluminium zinc coating GI based corrugated/tile pattern steel sheet 0.50mm thick of any color as approved having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. 16 Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any color as approved having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. 17 Material and labour, 10mm thick rendering in CM 1:3 on roof with water proofing compound surfaces finished even and smooth without using extra cement, complete all as specified. Note:water proofing compound shall be measured and paid separately 18 Material and Labour preparation of roof surface by throughly wire brused ,washed ,dried up,cleaned of all the forein matters and dust ,and applying bitumenous primer @250gms/sqm ,and then laying 4mm thick APP modified bituminous membrane with non woven polyster matt as reinforced weighting not less than 4.00kg per sqm ,laid on primed surface with torch application method by providing overlap minimum 100mm longitudnal and 150mm on transerve direction .All angles and similar projections should be sealed well with extra care to ensure full bondage,all joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR Latex @ 200ml /bag of cement. 19 Supply and fix in repair 15mm bore chromium plated bib taps long body fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes including taking down of old items all as specified and as directed. 20 Supply and fix in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and as directed. 21 Supply and fix in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 22 Supply and fix in repair 125mm size brass chromium plated shower rose 23 Supply and fix in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. 24 Supply and fix in repair 15mm bore stop valves chromium plated cast copper alloy (long shank, fancy type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes (concealed type) all as specified and as directed. 25 Supply and fix in repair PVC valve less syphonic action type flushing cistern low level with inlet ball valve float and handle including brackets 10 ltrs capacity. 26 Supply and fix in repair 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified and as directed. 27 Supply and fix in repair PVC connections 15mm size with PTMT nuts of length 450mm. 28 Supply and fix in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm 29 Supply and fix in repair vitreous china, wash down water closet(EWC), coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. 30 Supply and fix Vitreous china squatting pan Orissa pattern size 630x450 white with integral foot rest (excluding flushing cistern and flush ipe ) Make Cera or equivalent fixed in repair complete all as specified and as directed. 31 Supply and fix in repair vitreous China wash basin,coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets all as specified and as directed. 32 Demolition of brick work, PCC block or stone masonry built in cement mortar 33 Material and labour forprecast cement concrete block masonrywith solid blocks type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 34 Material and labour for Laterite stone masonry walling of rubble, coursed, well bonded bedded in cement mortar 1:6 complete as specified and as directed. 35 Taking down cement plaster onbricks or stone walls including raking out joints hacking for key scrubbing down with water etc 36 Material and labour, 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound, surface finished even and fair, complete all as specified.Note:water proofing compound shall be measured and paid separately 37 Supply only liquidwaterproofing compound 38 Material and labour, preparation of new plastered surfaces and applying two coats of acrylic emulsion (exterior grade) over a coat of primer on wall all as specified and as per manufacturers instructions.Note :- The rates including necessary scaffoldings and safety measures for safe doing of work at heights 39 Material and labour 10 mm thick rendering onstone masonry or faces other than fair faces of brick work in cement mortar 1:6 surfaces finished even and fair without using extra cement 40 Material and labour for preperation of new plastered surfaces and applying two coats of acrylic emulsion paint (interior grade) on wallover a coat of acrylic primer all as specified and as per manufacturers instructions. 41 Dismantling floor hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish of the premises 42 Material and labourfor coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15 mm thick screed bed in CM 1:4 all as specified and as directed. 43 Material and labourfor Glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat plaster in CM 1:3 all as specified and as directed. 44 Taking down chowkats with shutter (without taking off shutter from the frame)exc 1.5 Sqm but n.exc 4.00 Sqmeach. 45 Supply and fix Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete as specified and as directed. 46 Supply and fix Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete as specified and as directed. 47 Material and labour filling concrete inside frame in PCC 1:3:6, type C-0uisng 12.5mm coarse aggregate. 48 Supply and fix 30mm thick IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats . 49 Supply and fix 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type both side 50 Supply and fix IInd Class hard wood glazed and skeleton shutters 30 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing,plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc: sizes of members of shutters as specified in SSR part I, Section 8, clause 8.2(a), supplied and fitted to chowkats 51 M& L for preparation of new or previously untreated steelsurface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. 52 Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each. 53 Supply and fix Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening all as specified and as directed 54 Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site with Particle Board Core all as specified and as directed 55 Supply and fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixedwith aluminium wire staple 56 Dismantling cabinets boarding, any description, fixed in any position with Screws incl all fittings 57 Supply and fix Prelaminated particle board 18/19 thick exteriorgrade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in cup boards, shelves, cabinets and shutters, fixed with screws to frame work complete all as specified and as directed. 58 Supply and fix 18/20 mm thick plywood, BWR grade, type BB, fixed with screws to timber frame work as in cup boards etc ., 59 Material and labour for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint onwooden surfaces all as specified and as directed. 60 M& L for preparation of new or previously untreated woodbased surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as directed. 61 Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each. 62 Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm in same opening after easing and adjusting. Note : Serviceable shutters obtained from item No 61 above shall be reused. 63 Resecuring or easing and adjusting without taking down shutters of any descriptionexc 1 sqm and n exc 2 sqm each all as directed. 64 Supply and fix stainless steel telescopic Channel Drawers Slides fas specifed and as directed 65 Supply and fix stainless steel soft closing hydraulic hinges for shutter complete as specified and as directed 66 Supply and fix in repairs Continuous (piano) hinges brass bright finish or electrogalvanised, width of flaps (when open) 30 mm complete. 67 Supply and fix in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed. 68 Supply and fix in repairs 4 levers brass Lock cupboard, grade 1, size 50 mm 69 Supply and fix in repairs 75mm long aluminium handles, cast type, anodised 70 Supply and fix in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete. 71 Supply and fix in repairs 75 mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete 72 Supply and fix in repairs, 100mm Stainless steel butt hinges, medium weight 73 Supply and fix in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. 74 Supply and fix in repair 100mm long aluminium, anodised barrel tower bolt of extruded section. 75 Supply and fix in repair 150mm long aluminium, anodised barrel tower bolt of extruded section complete. 76 Supply and fix in repairs 100 mm size brass, 4 levers mortise lock, vertical type 77 Supply and fixin repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and overall length of cover plate 140mm. 78 Supply and fixin repair 300mm long ordinary MS rat tail rod pattern springs including roller plate complete. 79 Supply and fix plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover. 80 Supply and fix in repair 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail,complete. 81 Supply and fixin repair chromium platedsoap tray fixed with CP brass screws 82 Supply and fix in repairs bevelled edge mirror 600x450mm, selected quality glass mounted on 6mm thick PVC/AC building board/commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and as directed. 83 Dismantling wall and and ceiling boards (fiber,pulp,insulation etc) or Insulation boards/slabs/any thickness including cover fillets complete all as specified and as directed. 84 Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. 85 Supply and fix Anodised aluminium snap grid frame work for false ceiling all as specified - Size of grid 605 x 605mm - 86 Material and labourfor 4mm thick non-asbestos fiber cement building boards fixed or laid/inserted to timber, GI/aluminium framework with screws. 87 Supply and fix in repairs curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. 88 Supply & fixing in repair plastic finial of 28 to 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed by Engineer-in-Charge.Make: Aerolux/MEC or VISTA 89 Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed by Engineer-in-Charge. 90 Hacking out old broken glass ( any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones all as directed. 91 Material and labour for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed. 92 Material and labourfor 5.5mm thick sheet glass plain ordinary quality exc 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed. 93 Dismantling the existing water tank and Supply and fixRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 500 litres 94 Supply and fix in repair Ball brass valves, high pressure, with polythene float and flynut (25mm)complete, screwed for iron pipe or brass ferrule and fixed in repairs . 95 M& L for laying and pasting of bituminous strip of width 10cm of make 3M,BASF, Dr. Fixit or equivalent on joints of galvalume sheet and RCC surfaces including cleaning of existing surfaces complete all as specified and as directed. 96 Supply and fix in repairs rubber beading suitable size for widows complete as specified and as directed. 97 Supply and fix in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and as directed 98 Ditto all as per item No Above but 40mm dia suitable for steel sink. 99 Taking down defective/damaged water storage tank cover and supply & fix polyethylene tank cover with necessary locking arrangement all as specified and directed at site. 100 Supply and fixPVC magnet catcher fixed with screws to wooden framescomplete all as specified and as directed. 101 Material and labourPVC lipping edge tape fixed with nails/glue comoplete all as specified and as directed. 102 Supply and fix75mm long Hasp and staple, safety type, stainless steel hinge pin including bolt to hinge plate and fixed with screws 103 Supply and fix in repair Harrison rails, mild steel,chromium plated with fixing brackets, stops, rollers etc. 104 Supply and fix in repair Grating doom 100mm dia of CP with or without wastage hole complete all specified and as directed. 105 Taking down existing water proofing treatment of any description and removal rubbish off the premises, complete all as specified an as directed. 106 Dismantling of structural steel work including doors, gates etc 107 Supply and fix steel work in tubular trusses (tubular, angle, square and rectangular etc ) including erection shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed. 108 Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed. 109 Supply and fix in repairs PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors. 110 Supply and fix in repairs PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors. 111 Supply and fix PVC (SWR) bends 75 mm bore any radius 112 Supply and fix PVC (SWR) bends 110 mm bore any radius 113 Supply and fix PVC (SWR) floor trap 75 mm outlet dia, plain with grating including jointing with solvent cement 114 Supply and fix in repairs PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, fixed to walls 115 Supply and fix in repairs PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls 116 Supply and fix in repair PVC (SWR) S Trap for 110 mm dia of pipe all as specified and as directed. 117 Material and labour forpreparation of old treated celling surfaces and applyingone coat of white wash on ceiling all as specified and as directed. 118 Material and labour forpreparation of old treated celling surfaces and applying one coat of oil emulsion distemper all as specified and as directed. 119 Material and labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete as specified and as directed. 120 Material and labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint having VOC content less then 50 gms/lters (interior grade) on wallall as specified and as per manufactures instructions. 121 Material and labour for complete removal of existing treatment and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over a coat of putty all as specified and as per manufacturers instructions. 122 Material and labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (exterior grade) on wallall as specified and as per manufactures instructions. 123 Material and labour for preparation of old painted steel/iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint oncomplete as specified and as directed. 124 Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of epoxy paint complete as specified and as directed. 125 Material and labour for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint completeas specified and as directed. 126 Material and labour for preparation of old painted surfaces n.exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces all as specified 127 Material and labour for treating holes crackes etc.. up to 10 mm making V groove using pattil blades and filling the crackes with ready to use crack fillers and allowed to drycomplete all as specified and as dircted. 128 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and Material and labour for providing PCC 1:3:6, type C2 as in filling and mass concrete complete all as specified and as directed. 129 Cleaning and removing all scales and dirt, etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 and n.exc 500 ltrs
