|
| 1 | Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor and removing rubbish from site complete all as specified and directed. |
| 2 | Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding and removing rubbish from site complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulder masonry, built in lime mortar mortor incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbish from site complete all as specified and directed. |
| 4 | Dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) and removing rubbish from site complete all as specified and directed. |
| 5 | Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqmeach etc complete all as specified and directed. |
| 6 | Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but n exc n.exc 4Sqm each complete all as specified and directed. |
| 7 | Dismantling framed work in timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 8 | Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed. |
| 9 | M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate incl finished even and smooth without using extra cement as in plinth protection incl necessary form work to edges and joints to be filled with bituminous sealing compound complete all as specified and directed. |
| 10 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed |
| 11 | M&L for Moorumfilling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering. |
| 12 | M &L for Brickwork with sub class \"B\" old size bricks having crushing strength not less than 75Kg/Sqcm, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6complete all as specified and directed. |
| 13 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water and removing rubbish from site complete all as specified and directed. |
| 14 | M & L for rendering 15mm thickcement plaster on wallin cement mortar 1:6on brick wall / Concrete surfaces offinishing the surfaces even and smoothetc complete all as specified and directed. |
| 15 | M&L for Rendering 10mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and 5 mm thick in second coat with and including water proofing compound @ 3% by wt of cement complete all as specified and directed. |
| 16 | M & L for applying birla/J.K wall care white putty 1 mm thick in two layers for levelling the surface andtwo coatsexterior weather coat ( Apex paint or equivalent) over one coat of exterior primer over newly plastered surfaces of walls ,chajjas, complete all as specified and directed. |
| 17 | M & L for complete removal of existing treatment and applyingbirla / J. K. wall care whiteputty 1 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coatsexterior weather coat ( Apex paint or equivalent) over one coat of exterior primer incl. preparation of old surfaces ofwalls etc complete. of walls ,chajjas, complete all as specified and directed. |
| 18 | M&L for applying birla / J. K. wall care whiteputty 1 mm thick in two layers for levelling the surfaces on new wall surface including preparation ofsurface and applying two coats of acrylicEmulsion, white or tinted over a coat of wall primer complete all as specified and directed. |
| 19 | M & L for complete removal of existing treatment and applyingbirla / J. K. wall care whiteputty 1 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of acrylicEmulsionover a coat of wallprimer incl. preparation of old surfaces ofwalls etc complete all as specified and directed. |
| 20 | M&L for Applying three coats of white wash on newly plastered surface including preparation of new surface complete all as specified and directed. |
| 21 | M&L for 8-10 mm thick coloured vitrified tiles size not exceeding 0.36 Sqm in floors set &jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over and including 15 mmthick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | M&L for8-10 mm thick coloured vitrified tiles size not exceeding 0.36 Sqm in dado / skirting etc. set &jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over and including 10mm thick rendering in cm (1:4) complete all as specified and directed. |
| 23 | M&L for Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and including 15mm thick screed bed or beding layer in cement mortar 1:4, complete all as specified and directed. |
| 24 | Material & labour for glazed ceramic tiles of size600x 300 x 7mm thick,(joint free (rectified))coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 25 | S & F GI ( cold rolled) snap grid size of (600mm x 600 mm) / (595mm x 595mm)frame work of 24 x 32 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S & F colouredNon Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed. |
| 26 | S&F 125 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregateincluding PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed. |
| 27 | S&F 105 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregateincluding PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for filling in pressed steel frame complete all as specified and directed. |
| 28 | S&F 35mm thick 2nd class HWfactory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasonedandchemically pressure treated complete all as specified and directed. |
| 29 | S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 30 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.44mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 31 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 32 | S&F in repair pre-laminated particle board,18/19mm thick, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood beads all around fixed with screws to timber frame work complete all as specified and directed. |
| 33 | M&Lsecond class hardwood plain fillets square, rectangular in section clean sawn, secured with nails or brads area exc. 13 but n exc. 25 sqcm complete all as specified and directed. |
| 34 | S&F 100mm longhasp and staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed |
| 35 | S&F continuous (piano) hinges, 30mm,mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 36 | S & F Factory made Solid PVC prelamDoor Frame of size 50mm x 47mm made out of 5mm thickprelaminated PVC sheet wood grain printed and edges will be moulded with prelaminated sheet,reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. |
| 37 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelamon the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed. |
| 38 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm, half portion will be fixedwith 3.5mm thick frosted glass and half portion will be fixed with louvers with 3.5mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements complete all as specified and directed. Note:- Thickness of aluminium section shall not be less than 1.20 mm. |
| 39 | S&F aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 91.50 X 31 mm, side and top of size min 91.50X29.70, shutters vertical 39X18 mm,shutter top & bottom of size min 18x31.92 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 5mm thick tintedglass with rubber gasket,brush and aluminium beading , ,aluminium wire mess 0.36 mm diaetcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. Note:- Thickness of aluminium section shall not be less than 1.20 mm. |
| 40 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 41 | S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 42 | S&F 100mmButt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 43 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 44 | S&F Steel work in tubular trusses posts (of round/ rectangula/square hollow section)including angle cleats for jointingwith welding complete all as specified and directed |
| 45 | S & F Rolled sections (of round/ rectangula/square hollow section) including angle cleatsas in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesof grade Fe-290 (Gde E- 165)complete all as specified and directed |
| 46 | S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 11 to 15 mm complete all as specified and directed. |
| 47 | S&F Rolled mild steel Plates (plain or chequered) channels. Square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment GDE Fe410-0 or Fe 310-O complete all as specified and directed. |
| 48 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. |
| 49 | M&L for RCC Nominal Mix (1:1.5:3) type A-1 using 20 mm graded stone aggregate as in Beams, Cantilevers, bressummers, lintels over 1.5m span, coping over wall complete all as specified and directed. |
| 50 | Supply and fixing 16-18 mm thick Graniteof any shade( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and likein cement mortor 1:4including pointing in whitecement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc complete all as specified and directed. |
| 51 | M& L rounding/ chamferringto edges of stone slabss one edge , such as in steps , cooking plateform and othersimilar situations etc complete all as specified and directed. |
| 52 | S&F 25mm dia stainless steelcurtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge |
| 53 | S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 15 mm diaGI tubing and connection complete all as specified and directed. |
| 54 | S&FGI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 20 mm diaGI tubing and connection complete all as specified and directed. |
| 55 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 56 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed. |
| 57 | S&F 0.45 mm thickgalvalume sheetprecoated coloured modularridge suitable for profile pattern having aluminium zinc coating 150gsm/sqm (AZ-150), steel sheet any colour, sheet fixed with self driving screws, including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly etc. complete all as specified and directed. |
| 58 | S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position with and including PVC float valve assembly including assessories with float valve 20mm dia,including dismantaling of old tank with all fittings complete all as specified and directed. |
| 59 | S&F in repairGun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed. |
| 60 | S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall including ms clamps complete all as specified and directed. |
| 61 | S&F in repairPVC (SWR) pipes 110mm bore single socketed, in any length with adhesivejoints laid in trenches or in floors complete all as specified and directed. |
| 62 | S&F in repair PVC (SWR) bends 110 mm dia complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequal complete all as specified and directed . |
| 64 | S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed. |
| 65 | S&F in repairsPVC (SWR) pipes 75mm bore single socketed, in any length with adhesivejoints laid in trenches or in floors complete all as specified and directed. |
| 66 | S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with adhesive joints fixed to walls complete all as specified and directed. |
| 67 | S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed. |
| 68 | S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete all as specified and directed. |
| 69 | M&L for Mild steel TMT bars (Fe 500) 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 70 | M&L for Mild steel TMT bars (Fe 500) 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality etc complete all as specified and directed. |
| 71 | S&F in repair 15mm bore wall mixture with bend pipe for over head shower chromium plated ,fancy type, cast copper alloy etc complete all as specified and directed. |
| 72 | S&F in repair 125 mm size brass chormium plated,,fancy type shower rose including fixing to steel pipe or union complete all as specified and directed. |
| 73 | S&F in repair health faucet ABS body with wall hook and chrome plated PVC hose pipe of length not less than 1 meter, cast copper alloy complete all as specified and directed. |
| 74 | S&F in repair C P bib taps, cast copper alloyfancy type, concealedtype with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed. |
| 75 | S&F in repairs 2 way bib cock with single knob15mm dia chromium plated, cast copper alloy complete all as specified. |
| 76 | Supply and fixed in repair angular stopvalve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed. |
| 77 | S&F in repair central hole basin mixer chromium plated, fancy type 15mm dia as in wash basin (fancy type ) complete all as specified and directed. |
| 78 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed etc complete all as specified and directed. |
| 79 | S&F in repair purposely moulded looking mirror 5 mm thick glass fixed with studs complete all as specified and directed. |
| 80 | S&F in repair PVC connection on pipe 450 mm long with brass nut bolt complete all as specified and directed. |
| 81 | S&F in repair vitreous China, wash down water closet pan (pedestal pattern) white (excludingflushing cistern and flush pipe) WC including white colour seat cover complete all as specified and directed. |
| 82 | S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 83 | S&F in repair PVC low level flushing cisternof 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed. |
| 84 | S&F in repair Vitreous China full size table topcounter wash hand basin including waste pipe complete all as specified and directed. |
| 85 | S&F framed work such as grills gratings,sunshed cover fixed with nut bolts incl,cutting drilling holesetc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290gde E 165 complete all as specified and directed. |
| 86 | Demolition of cement concrete in any description and any position not otherwise specially provided complete all as specified and directed. |
| 87 | M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete. |
| 88 | M &L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. |
| 89 | MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 90 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 91 | Fixing of Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire.Note : Supply only chain link fencing and line wire will be measeured and paid separetly. |
| 92 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, exc 5cm and n.exc 10cm complete. |
| 93 | S&F Mild steel round bars 10mm dia and over as in strengthening bars for bending cranking spirallt for hooking for chain link, hooking end and welding with flats of chain link fencingFE-290 (Gde E-165)complete all as specified . |
| 94 | M&L fir cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railingsupto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 95 | M&L for preparation of new iron surfaces of any description over10cm width or girthand applying two coats of synthetic enamel paint over a coat of red oxide primercompleted all as speecified and directed |
| 96 | M & L for preparation of new iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint completed all as speecified and directed |
| 97 | S&F framed work (ornamental) as in steel gate of angle or other section with gusset plate ,rails braces etc completedrilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hook and hinges and also fastening and fixing complete. of Fe -290(Gde E-165) complete all as specified and directed |
| 98 | Dismantling posts or struts (wood,steel or RCC ) in natural ground any section, including taking out embedded portion and making good disturbed ground etc all as specified. Note:post hole excavation not measured seperatly and making good old post hole and use the same |
| 99 | Dismantling of barbed wire of any thickness or size. |
| 100 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treatedwith aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50mm thick uniformly levelled surface ofstone dust cushioning, , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cementincluding dismantling of old unserviceable tile complete all as specified and directed. |
| 101 | Demolition of RCC in anythicknes (reinforced cut as required to facilitate demolition ) complete all as specified and directed. |
| 102 | M&L for Plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundations / mass Concrete complete all as specified. |
| 103 | M&L for Brick work with sub class \"B\" bricks, old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 Complete all as specified and directed |
| 104 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping, kerb, haunching etc including necessary formwork complete all as specified and directed |
| 105 | M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 106 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Drain and surface channel, including forming fair finished to drain and channel/ drain complete all as specified and directed. |
| 107 | M&L for precast cement concrete 1:1.5:3 type A1 using 20mm graded BT stone agregate including necessary form work as in manholes cover slab etc, set in cement mortar 1:4 complete all as specified and as directed. Note :- Re-inforcement shall be measured and paid for separately under respective items of Sch \"A\" here in after. |
| 108 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, manhole, laying of cables/pipes/poles etc and getting out in any type of soil complete all as specified and directed. |
| 109 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified and directed. |
| 110 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 111 | M&L for walling of random rubble, brought up to course well bounded bedded and solidly hearted built in cm 1:4 complete all as specified. |
| 112 | Supply, laying , jointing , Field Testing , commissioning completeat site of (PE Material) HDPE Double wall corrugatedsewage pipe of 150 mm dia for non pressure underground drainage and sewerage with smooth internal &corrugatedexternal surgace confirming to IS 16098: Part:2 2013 with spigot or plain end ofaproved brand I.e. ASTRAL/Equivalentwith necessary jointing material coupler including transportation and freight charges,inspection charges loading and unloadingcharges, conveyance to departmental store and stacking the same inclosed shade duly protecting from direct sun ray and rains in all respect, etc, complete with all materials labours as directed by Engineer. in.charge, and specifications for water application, including all cost of material, labour required transportaion, loading unloading* stacking etc incluidng demoliton of old pipe with haunching/bed complete all as specified and directed |
| 113 | M&L for Concrete bed to drain pipes including packing under and haunching against the sides of pipe as cradleafter they are laid and tested in cement concrete 1:3:6 type C-2 (Nominal mix) using 20 mm graded crushed stone aggregate for 150 mm bore pipes complete all as specified and directed. |
| 114 | Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 115 | M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 116 | For one light or fanpoint controlled by one switch. |
| 117 | For one5 Amp independent socket point controlled by one switch. |
| 118 | For one 3 pin ,5 Amp socket point with other switch on the same board. |
| 119 | All as per item No102.00 here in before but for power point wiring usingwith 2.5sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. |
| 120 | S&F Modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed. |
| 121 | S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed. |
| 122 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 123 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 124 | S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 125 | S&F Modularlamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 126 | S&F modular fan step regulator 120W, 2 module complete all as specified and directed. |
| 127 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 128 | S&F testing and commissioning of MCB SPN 40 Amps,240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 129 | S&F sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 130 | S&F double door metallic sheet metal enclosure IP-43 for MCB DBdouble doorTPN 4 Way 415 Volts with 200 Amps rated bus bars of suitable size, including taking down existing DBcomplete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 131 | S&F TPN 40 Amps415 Vincluding making electrical coming/outgoing connections with lugs/thimbles, including taking down complete all as specified and directed. |
| 132 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 133 | S&F LED bulb 9/10 wattsuitable for angle / batten holder fitting complete all as specified and directed. |
| 134 | M&L for provn of Earthing complete with galvanised steel earth plateelectrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steelall as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the costof the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
| 135 | Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed. |
| 136 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 137 | M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLSH, 02 runs of Single core of size4 sqmm (for main current) drawn in & incl PVC conduitconduit less than 20mm dia ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run ofSingle core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified and colour coding of cables such as Phase-Red, Neutral-Black and Earth-Green, incl. taking down old unserviceable sub main wiring with conduit complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc conduit shall be measured as one unit length. |
| 138 | Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 139 | Taking down existing ceiling fan and refixing after repair as required to made smooth functional and applying hi-gloss spray painting on ceiling fan/blade, hanging ceiling fan with blades along with sealing cable end at existing location complete all as specified and directed. |
| 140 | Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 corecomplete all as specified and directed. |
| 141 | Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed.Note:-Punned thickness shall be measured for payment purpose. |
| 142 | Supplying and laying reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed |
| 143 | S&F GI Pipe light grade 40 mm dia ISI marked on pole/wall or laid in trenches incl all fittings (nut, bolt, clamps & washers), including taking up/down existing pipe complete all as specified and directed |
