|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 2 | M&L Demolition of RCC of any description and in any position not otherwise specifically provided for all as specified and as directed by Engineer-in-charge. |
| 3 | Demolition of Unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 4 | M&L Pre-cast AAC blocks masonry GR-1 of size 600x200x100mm and setting in CM 1:6,complete complete all as specified and directed by Engineer-in-charge |
| 5 | M&L for Plain Cement ConcreteType B1 1:2:4 (using 20 mm graded granite stone aggregate) as inplinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates,etc and the like including weathering, slightly rounded or chamfered angles and throatingincluding fixing of broken glass pieces over coping, complete all as specified andas directed by Engineer-in-charge. |
| 6 | Errection & Fixing framed work such as ornamental/intricated design gate including printed hings using Fi, Angle iron, square bars, MS plain sheet, grills, gratings etc. with ends of bars ladders, framed balusters, walk ways, railings, frame work of riveted or forged into spilkes, framed guard bars, barred iron doors,souldered and/or water tanks and similar work complete all as specified and directed by Engineer-in-charge |
| 7 | S&F framed work such as ornamental/intricated design gate including printed hings using Fi, Angle iron, square bars, MS plain sheet, grills, gratings etc. with ends of bars ladders, framed balusters, walk ways, railings, frame work of riveted or forged into spilkes, framed guard bars, barred iron doors,souldered and/or water tanks and similar work complete all as specified and directed by Engineer-in-charge |
| 8 | S&F Aluminnium composite panel (ACP) of 3mm thick panel with 0.25mm aluminium cover sheet thickness, any colour complete all as specified and directed by Engineer-in-charge. |
| 9 | S&F 300mm high stainless Steel letters of 204 Grade SS Sheet fixed at any height complete |
| 10 | S&F 150mm high stainless Steel letters of 204 Grade SS Sheet fixed at any height complete |
| 11 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation , etc or for shafts, wells, cesspits, manholes, pair holes, etc n.exc 10 Sqm on plan and n.exc 1.5 in depth and getting out in hard/dense soil. |
| 12 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete. |
| 13 | M&L for RCC M-30 Design Mix as in footing, plinth beams and columns below GL the like including necessary form work all as directed. |
| 14 | M&L for RCC M-30 Design Mix as in column above GLand the like including necessary form work all as directed. |
| 15 | Form work to sides of concrete foundation, footings, base of columns, raft and raft beems, sides and soffits if any of foundation and plinth beems and similar work, verticle or to batter of rough finished surfaces of concrete flat all as directed. |
| 16 | Form work to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete square rectangular or polygonal all as directed. |
| 17 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete. |
| 18 | Removing excavated material exc 250m but n.exc 500m and depositing where directed as in soils. |
| 19 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 20 | Material and labour for rendering 15 mm thickin cement mortar 1:6 on other than fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement. |
| 21 | Material and labour for rendering 15 mm thickin cement mortar 1:4 on fair faces of brick or concrete surfaces finishing surfaces even and smooth with WPC all as specified and directed by Engineer-in-charge. (Note: WPC will be measured and paid separately.) |
| 22 | M&L for 50 mm thick Cement concrete 1:2:4 type B2 using 40mm graded stone aggregate in sub base correction floors, surface fair finished and even and rough to receive floor finishes complete al as specified. |
| 23 | Material and labourfor vitrified ceramic (square/rectangular) light coloured polished tiles of thickness 10mm, (1st quality) area of each tiles not exc 0.36 sqm as , in floors etc. set and jointed in neat cement slurry and pointed in whitecement and pigmentto match over 20 mm thick screeding in CM 1:6 complete all as specified.( Note: screed bed shall also deemed to be included in the quoted rate by the contractor.) |
| 24 | Material and labourfor vitrified ceramic (square/rectangular) light coloured polished tiles of thickness 10mm, (1st quality) area of each tiles not exc 0.36 sqm,as in skirtingset and jointed in neat cement slurry and pointed inwhite or coloured cement to and including 10 mm thick backing coat with cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 25 | Material and labour glazed ceramic colouredtiles, 450 x 350 x 7mm thick, in dado/skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including rendering 10 mm thickin cement morter 1:4 for laying tiles complete all as specified.(Note: screed bed shall also deemed to be included in the quoted rate by the contractor.) |
| 26 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.complete all as specified. |
| 27 | Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified. |
| 28 | M&L high strength deformed TMT steel bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 29 | M&L high strength deformed TMT steel bars, as in reinforcement, 6mm to 8mm dia, cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 30 | M&L for 18 to 20 mm thick Granite (of any type) work in single piece (table rubbed and polished) in steps, floors, window- cills, jambs of doors, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshadeover and including 20mm thick CM (1:6) bedding layer complete all as specified and as directed by Engineer-in-charge. |
| 31 | Taking down shutters, repairs and refixing of any description in same opening exc 1 sq.m and n exc 2 sq.m each complete all as specified. |
| 32 | Taking up or down steel/GI/CPVC tubing 20/25/32 mm and connection, including cleaning for refixing or removal to store complete all as specified. |
| 33 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 34 | S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure |
| 35 | S&F CPVC pipes, SDR 11, 25 mm outer dia of pressure rating 6 kgf/sqcm conforming to IS-15778 with all fittings such as Tee,Bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls/ floors with all clampsin Shafts/ducts with all necessary scaffolding to fix the pipes andtesting the joints under prescribed pressure |
| 36 | S & F in repairs Wash basin wall hung with half pedestal 550x400 mmas per CERA -CAT No. S2040105 wash basin and Cat No S2090102 Half pedestal including waste pipe connections and pillar tap complete all as specified |
| 37 | S&F PVC Nahani trap 110mm size with SS grating including removing existing traps and jointing to waste pipe fixed in cement concrete type type B1 (1:2:4) all as directed by Engineer-in-charge |
| 38 | S&F Pillar taps 15 mm dia, cast copper alloy, with capstan heads,fancy type chromium plated ,screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe |
| 39 | S&F Stop valves/Cock/Angle Cock 15 mm dia, fancy type chromium plated, screwed down, high pressure, screwed both ends for 15mm dia pipe or for unionsfixedin repairs |
| 40 | S&F Bib taps 15 mm dia, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm dia pipe. |
| 41 | Supply and fixed in repairs stainless steel sink without draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm bowl size 410mmx330mmx160mm completecomplete all as specified. |
| 42 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified. |
| 43 | S&F 32mm dia PVC waste pipe approx 850mm long for sink/WHB complete all as specified. |
| 44 | S&F High density polythylene (HDPE) pipes 40 mm dia, of pressure rating 6 Kg/sq cm, fixed to walls, ceilings or in floors complete all as specified and as directed by Engineer-in-charge. |
| 45 | Material and labour for preparation of newly plastered surfaces of walls and applying wall care white putty thickness not less than 3mmand sand papering surfaces to achieve smooth surfaces and applyingtwo coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified . |
| 46 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces including removal of old paint and preparation of surface including all necessary scaffolding upto hight of 12 meter all as specified and as directed by Engineer-in-charge. |
| 47 | Taking down existing steel/aluminium windows any type and size . |
| 48 | M&L for powder coated aluminum frame for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified |
| 49 | M&L for powder coated (thickness of powder coating not less than 50 micron) top hung sliding aluminium door shutters, aluminum section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four No’s in each door, 08 wheels rollers (02 Nos in each shutter) hinges anodized aluminum snap beading screws etc complete all as specified with powder coating. |
| 50 | Supply and fixing 5mm thick frosted/figured glass, ordinary quality, in squaresexceeding 0.5 Sqm in each pane fixed in aluminium shutters, glazed with all necessary aluminium beads fittings required for sliding doors complete all as specified. |
| 51 | Supply and fixing prelaminated particle board 12 mm thick, interior grade, prelaminated both sides withdecorative choice laminationas panels of aluminium shutter complete all as specified. |
| 52 | M&L for Preparation of newsteel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of anticorrosive painta coat primercomplete all as specified and directed by Engineer-in-charge. |
| 53 | M&L for 150mm Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 54 | M & L for cement concretetype D-2 1:4:8 (40mm graded aggregate) 75mm tk as in subbase. |
| 55 | M&L for coloured chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointedwith grey cement and pigment to match the shade of tile in floors over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 56 | M&L for Filleting in any position and to any shape of sectinal area exc 25 Sqcm and not exc 50 Sqcm in cement mortar rendering 15mm thick in CM 1:4 including all mitres, stops, etc complete all specified and as directed by Engineer-in-charge. |
| 57 | S&F 20mm Gun-metal, globe or gate valves, with iron wheel head |
| 58 | Surface dressing n.exc 15 cm deep and getting out in soft/loose soil |
| 59 | Supply & stacking of good gardening soil from out side of MD land (Earth manure is stacks will be reduced by 20% for payment. |
| 60 | Supply & staking of Dump manure screened through sieve of IS designation 16 mm |
| 61 | Mixing & spreading of earth with Dump Manure in required thickness as directed by Engineer-in-charge. |
| 62 | Providing land scaping with Barmudas/American grass/carpet grass with necessary manure and earth including all material & labour with transportation charges etc. (Cost of Manure & earth shall be paid separetely). |
| 63 | Supply lay and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 10 sq mm 4 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as directed by Engineer-in-charge. |
| 64 | M&L for earthing complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of volts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary pit with cover , including testing on complition. |
| 65 | S&F of MCB DB SPN 8 ways double door with 240 Volt, 200 amps rated bus bar with all accessories flush in the wall including matching the existing surfaceall as specified and directed by Engineer-in-charge. Make:Havells QVE series or equivlent legerend/ standard/ indoasian |
| 66 | S&F in repairs MCB SP 5 To 32 AMP,single pole 240 Volts 10KA \"\"C\"\"&\"\"B\"\" curve , as per site requirment,Complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F in repairs MCB SPN 6-32 AMP,240 Volts 10KA \"C\" curve , Complete all as specified and directed by Engineer-in-charge. |
| 68 | S & F LED Flood light Nano RGB & coloured(Red/Green/Amber/Blue/Yellow),LED flood light with cast aluminium housing,toughened glass cover,high efficient LED,IP65/66, 10KV SPD,and wored with all accessories.Make:- Shakti Cat No. SZCFLMX050-RGBequivalent Bajaj/Philips |
| 69 | S & F LED Flood light Nano ,LED flood light with cast aluminium housing,toughened glass cover,high efficient LED,IP65/66, 10KV SPD,>100LM/WATT,and wored with all accessories.Make:- Shakti Cat No. SZCFLMX150equivalent Bajaj/Philips |
| 70 | S & F LED Flood light Nano ,LED flood light with cast aluminium housing,toughened glass cover,high efficient LED,IP65/66, 10KV SPD,>100LM/WATT,and wored with all accessories.Make:- Shakti Cat No. SZCFLMX100equivalent Bajaj/Philips |
| 71 | S & F LED Flood light Nano ,LED flood light with cast aluminium housing,toughened glass cover,high efficient LED,IP65/66, 10KV SPD,>100LM/WATT,and wored with all accessories.Make:- Shakti Cat No. SZCFLMX050equivalent Bajaj/Philips |
| 72 | S & F LED Street light celesta with deco pole ,Antique design street light with decorative poles of 3.5mtr ht with option of single & twin LED Celesta Luminaires,poles duly powder coated housings made from CRCA/GI poles. Cat No-SZPSCPD1X40W Shakti equivalent philips/bajaj/havells |
| 73 | Supply and fixing ofLED post top antique gate/ pillar light made from cast aluminum diffuser of engineering grade polymer and cast aluminum pole base with B-22 holders suitable for LED bulb upto 20W alongwith 600mm stainless steel pipe with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make : SZPLHBX015 Shakti/ Philips/ Crompton/ Bajaj |
| 74 | S & F of rigit non metallic PVC conduit 40mm exclusive of boxes(junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc with connected accessories all as specified anddirected by Engineer-in-charge . |
| 75 | Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of pipes and getting out in Soft / loose Soil complete as specified & directed by Engineer-in-charge |
| 76 | Cutting bituminus roadas per direction of Engr in Charge for laying of UG cable and match the existing road to the existing system. |
| 77 | Supply and lay in trenches / along the wall / floorpipes GI light grade of size 50 mm dia with and including all fittings and accessories including taking down old U/S pipe complete all as specified and and directed for cable protection |
| 78 | Supply and lay in trenches / along the wall / floorpipes GI light grade of size 25 mm dia with and including all fittings and accessories including taking down old U/S pipe complete all as specified and and directed for cable protection |
| 79 | Supply lay and testing cable XLPE insulated screened beded,galvanized steel trip or wire armoured, electric power cables (heavy duty) 1100 Volt grade with stranded aluminium conductor of size 6 sq mm 2 core. Including taking down old unserviceable cable any size by dismantling of all electrical connection etc all as directed by Engineer-in-charge. |
| 80 | Supply & Fixing Submersible pump,elctric driven 415V,TP suitable for 200/250 mm dia bore well(Casing caping size 200/250mm) complete 2 HP inclusive 40 mtr long submersible cable and starter. |
| 81 | M & L for dismantling of existing Kerb Stone & S & F LED Kerb stone outdoor type IP66,having High qaulity plastic and fiber high capacity material with 1200Kg load carrying capacity length 500mm,width 150mm and height 120 mm,in whitw,blue or as per requirement color,LED lightwith PCB in metacore,lenght of PCB 280mm width 25mm,LED driver having variable voltage and constant current,input voltage 90V to 300V,AC ,50Hz and as per IS 16104,operating voltage 220V,THD below 10%,operating tepm 30 to 60 Degree,driver having protection -short circuit,over load,over voltage & over heat protection,surge protection- upto 4KVA complete all as directed.Make-Shriyas Electricals& power solution or Eq as approved by GE. |
| 82 | Supply and installation in replacement of Translucent conical poles 10mtr long weather proof & socked proof reinforced door opening with junction box mounting arrangement but including of junction box with 4 Nos aluminium bus bar & including 1.0 M long single arm bracket and foundation bolts -4 nos with nuts, templates and including of LED Strip of Tri-color(Kesari at Top,White at Middle & Green at Bottom) all complete as per approved drawing (with internal accessories like connectors, one run of FRLS PVC insulated cable 1100V grade with multistrandad copper conductor of size 1.5sqmm 3 core conductor as per required and mcb) including taking down old rusted steel/PCC pole of any size by digging & cutting with foundation or shifting and reinstallation at other place as per direction of Engr-in-charge. Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1500mm with 8 nos. 12mm dia tor bars as main bars and 8mm dia. tor bars stirrups @ 190mm c/c as per approved drawing(including form work).This reinforcement shall conform to IS:1786 latest edition.The foundation shall extend above surrounding ground/driveway level for 200mm and have slant 63mm dia PVC sleeve cast insitu foundation for cable entry as per the drawing.Excavation,PCC,RCC,Form work and reinforcement shall be deemed to be included in quoted rates.Note:-Existing pole handed over to MES Store. Make :Helipole,Bajaj, Voltmount |
