Tender For Addn/Altn To Bldg No T-89 In ‘C’ Zone And Provn Of Temp Toielt With Ppgi Sheet For Jcos & Or In ‘M’ Zone At Rms; 1 Dismantling of structural steel work of any description complete all as specified and as directed. 2 S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chromate primer paint including preparation of surface complete all as specified and as directed. 3 S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., not exceeding 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. 4 S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as specified and as directed. 5 S & Fframed work such as grills, gratings etc., with ends of bars shouldered and /or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. 6 S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W complete all as specified and as directed. 7 S&F mild steel screw bolts (machine made) dia 11-15 mm and length 5 to 10cm length with hexagonal or square heads at one end or screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed. 8 S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and as directed. 9 S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldplain or corrugated steel sheet complete all as specified and as directed. 10 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldplain or corrugated steel sheet complete all as specified and as directed. 11 S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed. 12 S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screwscomplete all as specified and as directed. 13 S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and as directed. 14 M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. 15 M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. 16 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6)complete all as specified and as directed. 17 M & L for 100 mm thick PCC (1:3:6) type C-2,(using 40 mm graded stone aggregate) as in hardstanding including demolition of old cement concrete complete all as specified and as directed. 18 M & L for 100 mm thick PCC (1:3:6) type C-2,(using 40 mm graded stone aggregate) as in hardstanding complete all as specified and as directed. 19 M&L for rendering 15 mm thick on other thanfair faces of brick work or concrete surfaces in cement mortar (1:6) for finished even and smooth without using extra cement complete all as specified and as directed. 20 M & L Preparation ofnew plastered surfaces of walls , and applyingtwo coats of Cement Base paint over a coat of primer complete all as specified and as directed. 21 M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. 22 Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. 23 Excavation in trenches not.exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 Sqm on plan andn.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. 24 M & L for RCC M-20 design mix as in foundations, including rafts, footings, foundation beams, Plinth beams, bases for columns etc , basement slabs , under reamed piles and mass concrete complete all as specified and as directed. 25 M & L for RCC M-20 design mix as in columns, pillars, piers, posts and strutscomplete all as specified and as directed. 26 M & L for RCC M-20 design mixas in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. 27 Use and waste ofFormwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work complete all as specified and as directed. 28 Use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams complete all as specified and as directed. 29 Use and waste of Formwork to sides of pillars, posts, struts, piers,columns and stanchions complete all as specified and as directed. 30 M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 31 All same as per item No 30.00 above but 5mm dia and over and including 10mm dia in stirrups spacers and binders. 32 M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4)complete all as specified and as directed. 33 S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification complete all as specified and as directed. 34 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification complete all as specified and as directed. 35 S&F MS butt hings medium weight cold rolled 100mm size complete all as specified and as directed. 36 S&F 150 mm long aluminium anodised tower bolts complete all as specified and as directed. 37 S&F 100mm long aluminium anodised handles cast copper complete all as specified and as directed. 38 S&F Aluminum sliding door bolt 300mm complete all as specified and as directed. 39 S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and as directed. 40 S&Fsheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares. nexc 0.5 Sqm eachcomplete all as specified and as directed. 41 M&L for sand filling under floor well ramming including watering as required Spreading&leveling in layers not.exceeding 25cm thick complete all as specified and as directed. 42 M&L for hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammmed to a true surface complete all as specified and as directed. 43 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors laid over and including 15mm thick screed bedin CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. 44 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including baking coat of 10 mm thick in CM (1:4)complete all as specified and as directed. 45 Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. 46 Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. 47 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-Acomplete all as specified and as directed. 48 S&F Plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment of Fe-410-W (Gde-E-250 quality-A)complete all as specified and as directed. 49 M&L for rendering 10mm thickin CM (1:6) on fair faces of brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. 50 M & L rendering 15mm thick on cement mortar 1:4 brick or concrete work finished the surface even and smooth without using extra cement complete all as specified and as directed. 51 M&L preparation of new surfaces & applying three coats white wash complete all as specified andas directed. 52 S&Fgalvanised steel tubes medium grade wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and directed. 53 S&Fgalvanised steel tubes medium grade wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. 54 S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and as directed. 55 S&F PVC (SWR) 110mm dia bends in any radius complete all as specified and as directed. 56 S&F PVC (SWR) 110mm dia junction single T equal or un equal with an floor complete all as specified and as directed. 57 S&F of PVC (SWR) 75 mm dia vent cowl pipe complete all as specified and as directed. 58 S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 59 S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed. 60 S&F 15mm borebib tap cast copper alloywith crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as per specified. 61 S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 62 S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and as directed. 63 S&F PVC low level flushing cistern 10 ltr capacity syphonic action type white body with MS bracket,inlet ball valve, floathandle and flush pipe (for EWC or WC)complete all as specified and as directed. 64 S&F PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. 65 M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. 66 S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 67 S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm. fixed to plugs with chromium plated brass screws complete all as specified and as directed. 68 S&FGlass shelves, with 12mm thick desher glass incl CP brackets with brass nuts 300 mm long complete all as specified and as directed. 69 S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed complete all as specified and as directed. 70 S&F CP towel rail 600mm long with brackets, aluminium anodised 20mm dia complete all as specified and as directed. 71 S&F CP grating 100mm dia PTMT with waste hole complete all as specified and as directed. 72 S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 73 S&F for vitreous china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe,CP waste coupling & Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe(Minimum weight 60gms) complete all as specified and as directed. 74 S&F for depth 0.70mm-1.65 DWCPE (SN8) 180 (OD)/ 150 (ID) mm diameter pipes laid on 150mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes bed with and includingnecy excavation, returning filling and removal in any type of soil, RCC/Precast RCC with SFRC ventilating cover and frame, including all items and activities to execute and amek sewer line functionaletc complete all as specified and as directed. 75 S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and as directed. 76 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exceeding 22.5 cm but not exceeding 30cm long and 16 to 20mm dia of neckcomplete all as specified and as directed. 77 Taking down carefullycopper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling,floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed. 78 S&F Switch piano flush type single pole, one way 5 Amp complete all as specified and as directed. 79 S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and as directed. 80 Material and labour for (concelaed Type) point wiring including necessary chases cutting of wall for one light/fan/call bell point with 1.5 sqmmPVC insulated (FR-LSH) PVC sheathed multistranded copper conductor cable 1100 volts gradecontrolled by one way switchincluding 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC conduit with all accessoriesand sunk GI box for mounting hylem sheet of fittings like switch, socket and fan regulator with making good the distrubed surfaces as per the existing complete all as specified and as directed by the Engr-in-Charge. 81 All as per item No-80.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 82 S&F Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush typecomplete all as specified and as directed by the Engr-in-Charge. 83 S&F LED light fitting 1 x 20 W (4 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Bajaj/CG/Philips 84 S&F LED light fitting 1 x 09 W (2 FT), wall /surface mounted, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size flexible hose from ceiling rose to fitting complete all as specified and as directed. Make : Havells/Bajaj/CG/Philips 85 Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and as directed. 86 Supply, Fixing and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed. 87 Supply , fixing and testing in replacement of LED Bldg Security light fitting of capacity 20 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting and complete all as specified and as directed. 88 Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. complete all as specified and as directed. 89 S&F in repairs MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. 90 S&F MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBsmaking good the distrubed surfaces of various rating capacity complete all as specified and as directed. 91 S&F in repairs MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 92 S&F in repairs MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 93 M&L for sub main wiring in repairs complete with two runs of2.5 Sq mm and one run of 2.5 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping /Conduit pipe including taking down old unsv cable complete all as specified and as directed. NOTE:- two runs of 2.5 Sq mm + one run of 2.5 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length 94 M&L for sub main wiring in repairs with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping/Conduitcomplete all as specified and as directed. NOTE:- two runs of 4Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length 95 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. 96 M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. 97 M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: Punned down thickness shall be measured and paid. 98 M&L for laying brick sub class B old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed 99 Supply & laying tubes Light grade galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. 100 Supply and fixing for Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed. 101 Supply and fixing of Aluminium strip 25 x 3.15mm with porcelain insulators saddles and fixing screws etc. for roof conductors above ground completeall as specified and as directed.Note:(a) All the roof conductors down conductors and air termination rod shall be mounted on suitable size porcelain insulators/saddles.(b) Any portion of the lightning condcutor, air termination rod and the strip GI/Aluminium are not in contact with the building.(c) The cost of porcelain insulators/saddle with fixing accessories is deemed to be included in quoted rate.(d) Conductor shall be properly secured to the building.(e) Due case taken to avoid leakage/damage in roof of the bldg, repair/replacement cost of the leakage deemed to be included in quoted rate.(f) The lightning condcutor shall be secured at not more than 1.20 mtr apart for horizontal run and 1 mtr for vertical run. 102 Supply and fixing for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as specified and directed. 103 Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron strip 32x 6mm as earthind lead by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of required size (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 80mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. 104 M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI cover 10 m thick, funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.
