|
| 1 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc completeall as specified and directed. |
| 2 | M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair complete all as specified and as directed. |
| 3 | M&L for 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3)as in ceiling finished even and fair complete all as specified and directed. |
| 4 | M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cementincluding mixing of water proofing compound complete all as specified and directed (Note: WPC will be measured and paid seperately) |
| 5 | Supply only liquid water proofing compound |
| 6 | M& L for Preparation of new plastered surface of wall and over a coat of wall care putty not less than 1 mm thick and making the surface smooth and applying two coat of oil emulsiondistemper complete all as specified & directed. |
| 7 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd and directed. |
| 8 | M&L for preparationold decoratedpainted surfaces of wallsand applying one coatexterior emulsion weather proof paint complete all as specified and directed. |
| 9 | M&L for Complete removal of existing treatmentand applying two coats of exterior emulsion weather proof paintover a coat of cement based wall care putty not less than 1mm thick complete all as specified and directed. |
| 10 | M&L applying for exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour two coats over a coat primer, over a coat of cement based exterior putty not less than 1mm thick on newly plastered wall column projection, chajjas sides etc completely all as specified and directed. |
| 11 | M&L for preparationold decoratedpainted surfaces of wallsand applying one coat of white wash complete all as specified and directed. |
| 12 | M&L for preparationold decoratedpainted surfaces of ceilingand applying one coat of white wash complete all as specified and directed. |
| 13 | M&L for preparationold decoratedpainted surfaces of wallsand applying one coat oil bond distumper complete all as specified and directed. |
| 14 | Complete removal of existing treatmentand applying two coats of oil bound distemperover a coat of wall care putty not less than 1mm thick complete all as specified and directed. |
| 15 | M&L for preparationold decoratedpainted surfaces of ceilingand applying one coat oil bond distumper complete all as specified and directed. |
| 16 | M&L for preparationold decoratedpainted surfaces of wallsand applying one coat cement base paintcomplete all as specified and directed. |
| 17 | M&L for one coat of synthetic enamel painton wooden surfaces including preparation of old surfaces over 10cm width or girth complete all as specified and directed. |
| 18 | M&L for one coat of synthetic enamel painton steel surfaces of flag post 12mtr height including preparation of old surfaces over 10cm width or girth complete all as specified and directed. |
| 19 | M & L for complete removal of exisiting treatment on wall surfaces and applying damp proof coating in three layer treatement by applying first coat of Dr. fixit Dampguard classic followed by a coat of Dr. fixit Dampguard classic putty prepared by mixing 1 part of Damguard classic with 1 part of white cement (OPC) mixed so as to obtain consistency of a putty and finally applying second coat of Dr. fixit Dampguard classic, complete all as per manufacturers instructions, the treated surfaces shall be finished smooth and followed by two coats ofdistemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed. Note: Rate quoted is deemed to include for providing 104 Dampguard classic of Make Dr. Fixit completely in three layers including layer of putty, as per manufactures instruction upto the satisfaction of Engineer-in-Charge inorder to obtain desired finish and for arresting dampness completely. |
| 20 | Dismantling of floor, hearth or wall tiling including cement mortar bedding & backing coat and rubbish off the premises complete all as specified and directed. |
| 21 | M&L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectengular) area of each tile exc 0.11 sqm but not exc 0.18 sqm (400x400mm) in floors etc set and jointed in net cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6complete all as specified and directed. |
| 22 | M&L Glazed ceramic colouredtiles in vertical surface 300x450x7mm/ 300x600x7 mm thick set and jointed in net cement slurry and pointed in white or colour cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed. |
| 23 | Taking down old chawkats orframs with shutter(without taking off shutters from frame) n.exc 1.5 sqm each complete all as specified and as directed. |
| 24 | Taking down old chawkats orframs exc 1.5 sqm but n.exc 4 sqm each without taking off shutters from frame complete all as specified and directed. |
| 25 | M&L for2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at jointscomplete all as specified and directed. |
| 26 | S&F factory made plain framed paneled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and directed. |
| 27 | S&F factory made 35mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass /gauze etc. edg es of framing plain chamfered or rouonded fitted withwith cut and mitred beads for securing glass, wire cloth etc. complete all as specified and directed. |
| 28 | S&F Aluminium alloy wire cloth 0.45 mm nominal dia or wire and average with of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 29 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling & fixing in opening complete all as specified and directed. |
| 30 | S&F Factory made solid PVC Mouolded door shutter 28 to 30 mm thick(stiles) with 2,4,or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in ferame at site with wood free EPS as percomplete all as specified and directed. |
| 31 | S&F 100mm size stainless steel butt hingescomplete all as specified and directed. |
| 32 | S & F150 mm aluminium , anodised, barrel tower bolt of extruded section complete all as specified and as directed. |
| 33 | S&F300 mm aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clipsof sheet, castor extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 34 | S & F floor door stopper of aluminimumalloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed. |
| 35 | S & Faluminium handlescast type anodised, size of handle 150mm complete all as specified and as directed. |
| 36 | M&L prepapration of new or previously untreated surfaces of wood or wood based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 37 | S & F Aluminium anodised powder coated frame section weighing 0.55 kg/m for sliding window / ventilator with one or more rebates and anodised with powder coated (minimum thickness of powder coating 50 micron)shutters including necessary joining cleats powder coatedglazing clips, powder coatedanodised aluminum snap beadings, screws and aluminum fittings such as suitable handle, Tower bolt 100mm long 2 Nos for eachwindow shuttercomplete all as specified and directed |
| 38 | S &F Powder coated Alumnium frame with minimum thickness of 50 micron powder coating for doors ,windows ,ventilators with one or more rebates including pining cleat for fixing etc, complete all as specified and as directed. |
| 39 | S&F Alurninium powder coated grill (anodised transparent or dyed to required shade according to IS 1868 with rninirnurn anodic coating of grade AC 15) of approved design/pattern with approved standared section and fixed to the existing window frame with CP brass /stainless steel screws @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as per requirement and as directed. |
| 40 | S&Fsheet glass 4.8 mm thick ordinary quality and glazing with putty each pane n.exc 0.50 sqm fixed in steel / wooden/aluminium framecomplete all as specified and as directed. |
| 41 | Resecuring or easing and adjusting, without taking down shutters of any description exc 1.00 Sqm n.exc 2.00 Sqm each complete all as specified and as directed. |
| 42 | S & F in Repair Aluminiumhinges 75mmto the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening upto 3 meter height complete all as specified and directed. |
| 43 | S & F in Repar Aluminium hinges75mm to the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening from 3 meter to 6 meter height complete all as specified and directed. |
| 44 | S & F in RepairAluminium hinges 75mm to the aluminium window by taking down existing aluminium window shutter and refixing the same shutter after replacing of hinges in the same opening from 6 meter to 9 meter height complete all as specified and directed. |
| 45 | M&L 4.0 mm thick figured glass ordinary quality, glazing with oil putty and glazing pins/spring clips in squares n.exc 0.50 Sqm each including hacking out old broken glass from frame complete all as specified and directed. |
| 46 | S & F in repairs aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clipsof sheet, castor extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mm complete all as specified and as directed. |
| 47 | S & F in repairs aluminium handlescast type anodised, size of handle 150mm complete all as specified and as directed. |
| 48 | S & F in repairs floor door stopper of aluminimumalloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed. |
| 49 | S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avg width ofaperture 1.40mm and fixed with stainless steel wire staples and wooden cover fillets complete all as specified and as directed. (Wooden cover fillets shall be measured and paid separately) |
| 50 | S&F in repair 100mm size stainless steel butt hingescomplete all as specified and directed. |
| 51 | S&F in repair Aluminium(extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weith between 61 to 80 kg and fixed complete all as specified and directed. |
| 52 | S&F in repair fancy type angle Stop cockCP cast copper alloy for 15 mm bore pipe , complete all as specified and directed. |
| 53 | S&F in repairfancy type Bib taps cast copper alloychromium plated for 15 mm bore pipe, complete all as specified and directed. |
| 54 | S & F in repairs forpillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 55 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 56 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections, brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed. |
| 57 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 58 | S&F PVC floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed. |
| 59 | S&F 600 x 450mm bevelled edge mirror of selected quality glass 5mm tyhick polished mounted on 6mm thick AC building board fixed to walls complete all as specified and directed. |
| 60 | S&F in repair20mm dia Harrison rails,curtain rod decorative with knobs,brackets,stops, rollers etc fixed with nut, screw and washer of stainless steel complete all as specified and as directed |
| 61 | M&L providing bond coat in repair by mixing 301 Pidicrete URP (Make: Dr. Fixit from Pidilite Industries) with cement in (1:1) ratio by weight with an overlay of repair mortar by mixing 10%-15% 301 Pidicrete URP (Make: Dr. Fixit from Pidilite Industries) by weight of cement, in CM (1:3) by adding 20% water by weight for workable consistency, forming upto 25 mm thickness of repair plaster (including bond coat and repair mortar) complete as per manufacturers instructions, as in repairs to exposed portion of reinforced concrete after cleaning the damaged RCC surface, breaking of loose concrete, cleaning of reinforcement using Rust remover and the applying anti-corrosive epoxy primer alongwith fixing of chicken wire mesh before applying repair mortar for damaged RCC of cills, chajjas, lintels, shelves, lintels, landing, edges, fins, Fascias, drops of slab/roof projection etc..., for heights upto 3.0 Mtrs above GL and finishing the surface smooth and even, followed by applying exterior wall care putty not less than 1.5 mm thick and two coats of exterior weather proof emulsion over a coat of exterior primer complete all as specified and as directed .Note : Cost of scaffoldings/stagings, formworks, Dr Fixit 301 Pidicrete URP, anticorrosive epoxy primer and chicken mesh are deemed to be included rate qutoed for this item |
| 62 | M& L mild steel TMT CRS bars 10 mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips , including embedding in concrete, as necessary, complete all as specified and directed. |
| 63 | M& L applying a coat of anti corrosive agent NITOZINC primer on exposed steel surfaces (new & old) making sure the surfaces are properly coated complete all as specified and as directed. |
| 64 | M&L epoxy resin concrete bonding agent NITOBOND EP on old exposed concrete surface for bonding new cementitious materials to existing cementitious surface complete all as specified and as directed. |
| 65 | Removing by cutting / up rooting plan / tree under surface of wall/celling including making good the damage portion with cement mortar 1 :3 or concrete 1 :2:4 type B1 using 20 mm graded aggregate complete all as specified and as directed (Note: Height of bldg is from 3m to 10m from GL) |
| 66 | Weldings in repairs exc 2.5 cm but n exc 5cm and thick of metal to be welded exc. 6mm but n.exc.9mm complete all as specified and as directed |
| 67 | S & F in repairs PVC water tank cover including hinges in any size of water tank complete all as specified and directed. |
| 68 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 69 | M&L plastering to bottom and sides of sunken floors in CM 1 :3 15mm thick surface finished even and smooth using extra cement with WPC complete all as specified and directed.(Note: WPC will be measured and paid seperately) |
| 70 | S&F 40mm bore HDPE pipe as in spout pipes of sunken floors complete all as specified and directed |
| 71 | M&L applying Nitroproof 608 Pa, minimum 0.8 dft over a priming coat ofequivalent product on horizontal and vertical surfaces all as manufacturer instruction as in slab/wall surfaces complete all as specified and directedNote :- Fill with water and checkfor dampness and seepage. In case the slightest indication of seepage/leakage is noticed, the same shall be rectified by the injection grouting to seal all cracks or application of polymer modified mortar FORSRO Nitrobond SBR or equivalent product admixturethe integral WPC or cementitious crystaline waterproofing compound in the effected area to seal all cracks and micro cracks if any additional coat of Nitroproof 600Pa which shall be done by contractor at his own cost. |
| 72 | M&L PCC 1:5:10 lean concrete type E-2 using 40mm graded aggregate as in filling of sunken floor complete all as specified and directed. |
| 73 | S&F in repair vitreous china wash down water closet (pedestal pattern) white with \"P\" or \"S\"trap front or back inlet complete all as specified and directed. |
| 74 | Taking out/removing the accumulated sludge soil sewage/ any other foreign/foul materials etc (solid/semisolid) from the well/Soak wel by mechanically means including cleanihg the septic tank/ man hole with water and spreading bleaching powder @ 200 gms per sqm for disinfections purpose and making the system functional for manhole/Soak well / Septic tank depth exc 0.50m to 1.50M from below GL. complete all as specified and as |directed. Notes () Quantity upto water/ Sludge level shall be measured (i) The Solid/ Semi solid/ Liquid waste obtaingd to disposed off outside the Defence land. (üi) No extra payment shall be made for.dewatering and cleaniro with water which shall deemed to be included in th unit räte of this item(iv) Bleaching powder measured and paid seperately.. |
| 75 | All as item No . 74 above but depth 1.50mto 4.00m. |
| 76 | Supply only Bleaching powder. |
| 77 | Cleaning of septik tank of capacity 10-25 users including removal of sludge to a distance exc 50 m complete all as specified and directed. |
| 78 | Cleaning of septik tank of capacity 25-50 users including removal of sludge to a distance exc 50 m complete all as specified and directed. |
| 79 | Demolition of RCC Concrete of any description and in any position not otherwise specifically provided forcement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 80 | M&L Precast reinforced cemeri concrete cover slab 1:1.5:3 type A- 1, (using 20mm graded stone aggregate)set in cement moprtar 1:4 including necessary form work complete all as specified and as directed . |
| 81 | Cleaning of sewer line 150 mm diaincluding removal of sludge to a distance exc 50 m complete all as specified and directed. |
| 82 | S&Fin repairs 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring jointslaid in trenches or in floors including PCC bed andexcavation in any type of soiland dismantling of pipe and bed of existing sewer line complete all as specified and directed. |
| 83 | S&Fin repair 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring jointsfixed on wall including taking down existing rain water pipe complete all as specified and directed. |
| 84 | S&F 110 mm PVC (SWR) bends any radius complete all as specified and directed. |
| 85 | Cleaning of PVC water storage tank of capacity exc 250 Ltr but n.exc 500 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 86 | Cleaning of PVC water storage tank of capacity exc 500 Ltr but n.exc 1000 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 87 | Cleaning of PVC water storage tank of capacity exc 1000 Ltr but n.exc 5000 ltr on roof or any position by disconnecting if required ,removing sludge,mud ,brushing ,rubbing and removing of alge if any and washing with bleaching powder and reconnecting /placing at its original position and writing date of cleaning complete all as specified and as directed. |
| 88 | S&F in repairs 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceilings/floors complete all as specified and as directed. |
| 89 | S&F in repairs 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceilings/floors complete all as specified and as directed. |
| 90 | S&F in repairs 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceilings/floors complete all as specified and as directed. |
| 91 | Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank complete all as specified and as directed. |
| 92 | Rotational moulded polyethlene water storage tanks of capacity 2000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank complete all as specified and as directed. |
| 93 | S&F in repair 25 mm bore ball vallves nigh pressure of PTMTwith epoxy coated Aluminium rod & high denisity plastic ballscrewed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 210 gms) |
| 94 | S&F in repair 32 mm bore ball Gun metal globe or gate valves with brass wheel screwed both ernds for-pipe and fixed complete all as specified and as directed. |
