}

Tender For Annual Maintenance And Repairs Works For Vidhi Building At G.J. Bhosale Marg Mumbai. (For Year 2025-26), mumbai-Maharashtra

Tender Notice

51894237
Tender For Annual Maintenance And Repairs Works For Vidhi Building At G.J. Bhosale Marg Mumbai. (For Year 2025-26)
Tender
Indian
Maharashtra
Mumbai
24-10-2025

Tender Details

Tender For Annual Maintenance And Repairs Works For Vidhi Building At G.J. Bhosale Marg Mumbai. (For Year 2025-26)-1 . Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. 2 . Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 3 . Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete. 4 . Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. 5 . Removing urinal pans or wash hand basins with frame including disconnecting the sanitary and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside etc complete. 6 . Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete. 7 . Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete. 8 . Removing brick bat coba including stacking the spoils as directed with all leads, lifts etc, complete. 9 . Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 10 . Removing wooden or A.C. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete. 11 . Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts etc. complete. 12 . Replacement of damaged Alluminium Handle 125 mm of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 13 . Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer in charge conforming to IS 9077. rusted surface shall become blackish non rusted colour. After hours of application of rust remover, loose particles shall removed by brush. Apply one more coat of Rusticide. Apply bonding coat slurry of high performance acrylic polymer Methyl 2-methylpropenoate copolymer with another enoate approved by Engineer in charge on entire surface. Mix 1 acrylic polymer with 0.5 Kg of cement. Finish it with ready use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents approved by Engineer in charge (The Polymer Modified Mortar (PMM) should attain min. compressive strength of 20 N/mm2 1 day and 30 N/mm2 in 7 days) by adding 13 - 16% water weight of polymer modified mortar for treatment to the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting Admixture as approved by Engineer in charge per 25 Kg polymer modified mortar. After mixing polymer modified mortar, it can be trowel applied or sprayed. When applying hand, polymer modified mortar must be forced tightly into substrate to ensure complete contact with the substrate. (If scaffolding is required, same shall be provided and will paid under relevant item) (Upto 15 mm thickness at a time). 14 . Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface shall become blackish non rusted colour. After 24 hours of application of rust remover, loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate copolymer with another innovate as approved by Engineer in charge on entire surface. Mix 1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair polymer modified mortar based on special cements, formaldehyde based polymer with thixotropy modifying agents as approved by Engineer in charge (The Polymer Modified Mortar (PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30 N/mm2 in 7 days) by adding 13 - 16% water by weight of polymer modified mortar for treatment to the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting Admixture as approved by Engineer in charge per 25 Kg bag of polymer modified mortar. After mixing polymer modified mortar, it can be trowel applied or sprayed. When applying by hand, polymer modified mortar must be forced tightly into the substrate to ensure complete contact with the substrate. (If scaffolding is required, same shall be provided and will be paid under relevant item) (15-30 mm thickness at a time). 15 . Providing internal cement plaster 6 mm thick in a single coat using Ready to use wall plaster in cement mortar 1:3 to concrete surface in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. With Prior Approval of Concerned S.E. 16 . Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plaster to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 . Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. 18 . Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 19 . Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 16 . Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plaster to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 . Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete. a) cement ratio 1:5 With Prior Approval of Concerned S.E. 18 . Providing and laying vitrified stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 19 . Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 24 . Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. Note : While arriving at the rate of item of item weight at 6.90 Kilogram/Square Metre is considered. (a) Colour Anodized 25 . Supplying and fixing in position Colour anodized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83 kg per metre and top and side section of size 122x 31.75 mm weighing 1.15 kg per running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6 kg per running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete 26 . Providing and fixing in position anodised (as per IS 1868/1982) Aluminium fixed staggered ( Z Type) Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt, Aluminium angle of size 15 mm x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing and as directed by Engineer in charge etc.complete. 27 . Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. 28 . Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 29 . Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint, 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 30 . Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 31 . Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 32 . Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anticorrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 33 . Providing and fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.and remaking good the demolished portion and primer of anti corrossive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 34 . Providing and fixing on walls/ ceiling/ floors, 100 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 14.74 Kg/meter with necessary fittings. and remaking good the demolished portion and applying primer of anticorrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 35 . Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 36 . Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 37 . Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 38 . Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 39 . Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. 40 . Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. 41 . Providing and fixing Coloured glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm. size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. 42 . Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 43 . Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. 44 . Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 45 . Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. 46 . Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. 47 . Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. 48 . Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. 49 . Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 50 . Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 51 . Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 52 . Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 53 . Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 54 . Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. 55 . Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. 56 . Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. 57 . Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. 58 . Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. 59 . Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets/union nut etc. complete. 60 . Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. 61 . Providing and fixing C.P. sink cock with raised J shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. 62 . Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. 63 . Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete 64 . Providing and fixing ISI 1729/2002 grade 75 mm dia Cast Iron Waste Water Pipe with lugs necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means by galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm square rod with Galvanised Iron clamp with washer as per design drawing and as directed to keep pipe 50 mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of gray oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in- Charge. 65 . Providing and fixing ISI 1729/2002 grade 100 mm dia. Cast Soil Pipes With lugs including plug bend necessary fittings such as bends, tees, single junction, double junction, slotted vent, offsets on wall or into the ground including filling joints with cement mortar 1:2 proportion fixing on wall by means of galvanised Mild Steel bracket of 30 x 5 mm plate and 8 mm square rod with galvanised Iron clamp with washer as per design, drawing and as directed to keep pipe 50 mm away from wall including necessary scaffolding and painting the exposed faces with one coat of red lead oil paint and two coats of white oil paint including removing the existing pipe if necessary and conveying and stacking in PWD Chowky or as directed by Engineer-in-Charge. 66 . Providing and fixing Wall Mounted European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia. UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) 67 . Providing and fixing Shower Head with shower arm of approved make shower tube hand shower with divertor of spout including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge. 68 . Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. 69 . Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 70 . Providing and applying Bitumen VG30/VG40 layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed etc. complete. 71 . Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) 72 . Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter 73 . Providing and applying Wax polish to the old wood work including knotting, preparing the surface, scaffolding etc. complete as directed. 74 . Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed 75 . Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note: The work to be executed on prior approval of Superintending Engineer will be necessary. 76 . Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulux Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hours After applying Asian / Berger / Nerolac / Dulux Paints or equivalent acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.) 77 . Scrapping the old plastered internal surface with sand paper and coating the entire surface with mixture of whiting or glue and linseed oil including scaffolding etc. complete as directed. 78 . Providing and applying priming coat on concrete/ masonry/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. 79 . Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. 80 . Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 81 . Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 82 . Providing and fixing 3.5 to 4 mm thick Veneer finish wall Paneling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the requisite manufacture viz Anchore / Century / Kenwood /Duro / jet or equivalent generally confirming to I:S 7101980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groove matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer In-charge. 83 . Replacement of damaged alluminium Butt Hinges of 125 mm approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 84 . Replacement of damaged Mortise Lock of approved quality make to door shutter including Removing and Refixing with Necessary screw, making proper adjustment for smooth operation etc. complete as per sample approved by Engineer chareg. 85 . Replacement of damaged Aldrop 300 mm Chromium plated approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 86 . Replacement of damaged Aldrop 300 mm Iron Oxidised of approved quality and make to door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 87 . Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 88 . Replacement of damaged Alluminium Handle 125 mm of approved quality and make to door/window shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 89 . Replacement of damaged Lock of approved quality and make to cupboard and doorwer including Removing and Refixing with necessary screw, making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in- charge. 90 . Removing chocks and leakages from down take G.I/ CI/ PVC pipe line on walls floor level by using zoola / scaffolding and rectify the same for functioning with all lifts etc. complete. 91 .Manually clearing the chocks from under ground drainage line including Inspection chambers with the help of required tools for proper functioning line chamber to chamber etc. complete. 92 .Manually clearing by removing the chocks from Nahani Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. complete. 93 . Filling tiles joint portion of flooring and dado filling with white cement by removing existing loose mortar/ cement slurry from joint with tools and finish with washing cleaning and curing etc. complete. 94 . Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 95 . Supplying Black Kadappa (one side polish) (Machine cut) 35mm thick as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 96 . Supplying Telephone Black Granite as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 97 . Supplying IInd Class Bricks (Red) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 98 . Supplying Teak wood bidding 1/2 * 1/2 as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 99 . Supplying Ply wood 12mm thick as per approved sample by Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 100 . Supplying Ply wood 6mm thick as per approved sample by Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 101 . Supplying Formica 1.5 mm thick as per approved sample by Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 102 . Supplying Tower bolt brass oxidised 10 mm dia length 150 as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 103 . Supplying Ferical as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 104 . Supplying Ply wood 18mm thick Commercial as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 105 . Supplying Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 106 . Supplying Rose mortise lock with long body door set as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 107 . Supplying SS Body doors Stoppers as per approved sample the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 108 . Supplying SS door handle 20mm thick 300mm long as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 109 . Supplying Nails iron all size as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. Figure( 110 . Supplying Screws 1 12 as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 111 . Supplying Screws 1 12 as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 112 . Supplying Screws 1/2 as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 113 . Supplying Rawal Plug as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 114 . Supplying Aldrop 300*16mm Chromium Plated as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 115 . Supplying Aldrop Stainless steel 300*16mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 116 . Supplying Handle 150mm Brass Chromium plated (Rounded Shape) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 117 . Supplying G.I.Screw 50mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 118 . Supplying G.I.Screw 25mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 119 . Supplying Tower bolt M.S. Chromium plated 10mm dia,length 300mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 120 . Supplying Lock for Sliding Shutter as per approved sample the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 121 . Supplying All Bearing Roller as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 122 . Supplying Aldrop Stainless steel 300*16mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 123 . Supplying Handle 200mm Stainless Steel (Rounded Shape) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 124 . Supplying Stainless Steel Hinges - 100mm 14 gauge (Heavy Duty) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 125 . Supplying Door Stopper Stainless Steel as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 126 . Supplying G.I.Screws 30mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 127 . Supplying G.I.Screws 40mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 128 . Supplying C.I.Bend 75mm dia. as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 129 . Supplying C.I.Bend 100mm dia. as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 130 . Supplying Ball cock 50mm dia.P.V.C.FLOAT as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 131 . Supplying Bib cock stop tap brass heavy 15mm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 132 . Supplying P.V.C. flexible Waste Pipe 32 mm dia as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 133 . Supplying Bleaching Powder as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 134 . Supplying Mohagani seat with lid as per approved sample by Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 135 . Supplying Shower rose chromium plated brass 10cm as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 136 . Supplying C.P.wall mixer with telephone shower arragnement only but without teltphone shower crutch jaquar make continental (Cat.No. CON-217) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever 137 . Supplying C.P.sink cock with swinging casted spout jaquar make continental (Cat.No. CON- 347) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 138 . Supplying C.P.sink cock with raised J shaped swinging casted spout (table mounted) jaquar make continental (Cat.No. CON- 359) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 139 . Supplying C.p.shower arm 190mm long light body with wall flange jaquar make continental (Cat. No. SHA - 477) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 140 . Supplying C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 141 . Supplying C.P.Towel rail 24 jaquar make continental (Cat. No. ACN 1111N ) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 142 . Supplying C.P.Soap dish hooker jaquar make continental (Cat. No. AKB 35731 ) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 143 . Supplying C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 144 . Supplying C.P.Pillar cock jaquar make queens collection (quarter turn fitting) (Cat. No. QQT 7011 ) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 145 . Supplying C.P.pillar cock (ISI) jaquar make continental as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 146 . Providing and fixing 10 cm PVC Nahani trap with grating, etc. complete. 147 . Supplying C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON- 021) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 148 . Supplying C.P.Bib cock (ISI) jaquar make continental (Cat.No. CON-037) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 149 . Supplying C.P.2-way bib cock jaquar make continental (Cat.No. CON-041) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 150 . Supplying C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON- 047) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 151 . Supplying C.P.Angular stop cock jaquar make continental (Cat.No. CON-053) as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 152 .Mason II Class Skilled 153 . Plumber With Tools - Skilled 154 . Carpenter II Class Skilled 155 .Mazdoor - Unskilled Heavy Male 156 . Helper Un Skilled 157 . Supplying Cement as per approved sample by the Engineer charge with all lead and lifts etc. complete and stacking wherever directed. 158 . Supplying White Cement as per approved sample by the Engineer in charge with all lead and lifts etc. complete and stacking wherever directed. 159 . Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete. 160 . Removing any kind of debris including loading in truck and conveying to dumping point approved by MCGM, unloading, spreading etc. complete. With all leads and lifts. 161 . Basic Test of Cement : Carrying out Standard Consistancy Fineness, Specific Gravity, Setting Time (Initial & Final ), Compressive Strength, Soundness Test 162 . FINE AGGREGATES : Carrying out test of Fineness Modulus (Sieve Analysis), Silt & Clay Content 163 . FLOORING TILES (MOSSAIC / CEMENT) : Carrying out test of Flooring of Natural Stone (Kota, Marble, Granite, Tandur etc.) Water Absorption , Specific Gravity 164 . BRICKS : Carrying out test of Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 165 . Royalty Charges for Sand are to be paid to the contractor after producing receipt of royalty paid to the Govt. for the material used for this work.

Key Value

Document Fees
INR 590 /-
Tender Value
Refer document

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail