Tender For Construction Of Canopy Of Size 15.24M X 11.27M In Security Main Gate To Protection Of Rain ,Heat And To Better Operation/Handling Of By Metric Equipment For Security Measure At Amd ,Wr ,Jaipur., Jaipur-Rajasthan
TDR : 51894011
Tender Notice
BOQ
Expired
Jaipur
Rajasthan
Tender For Construction Of Canopy Of Size 15.24M X 11.27M In Security Main Gate To Protection Of Rain ,Heat And To Better Operation/Handling Of By Metric Equipment For Security Measure At Amd ,Wr ,Jaipur.
Name of Work:Construction of “CANOPY” of size 15.24m x11.27m in security main gate to protection of rain ,heat and to better operation/handling of by metric equipment for security measure at AMD ,WR ,Jaipur.
Sl. No.
Item Description
1
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and for all lift, as directed by Engineer-in-charge.
2
1:2:4 (1 cement : 2 coarse sand (zone-III) derived fromnatural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)etc. complete.
3
Steel work in built up tubular Hot finished welded type tubes (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
4
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5
Providing and fixing precoatedgalvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
6
Providing and fixing of Ridges plain (500 - 600mm)precoated galvanized steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micronsusing self drilling/ self tapping screws complete :
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
