|
| 1 | DISMANTLING & DEMOLISHING WORK |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 3 | Of area 3 sq. metres and below. |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | 12 mm cement plaster of mix 1:4 (1 cement:4 coarse sand). |
| 6 | WOOD WORKS |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames.wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately |
| 8 | Local best quality Teak wood |
| 9 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. |
| 10 | Local best quality Teak Wood |
| 11 | 35 mm thick Shutters |
| 12 | Providing & fixing bright finished brass Tower bolts (barrel type) with necessary screws etc. complete. |
| 13 | 250x10 mm |
| 14 | Providing and fixing bright finished brass door latchwith necessary screws etc. complete : |
| 15 | 300x16x5mm |
| 16 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 17 | 125 mm |
| 18 | PAINTING WORKS |
| 19 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaece to prepare the surface even and smooth |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 21 | New work (two or more coats) over and including priming coat with cement primer: |
| 22 | Finishing walts with Acrylic Smooth exterior paint of required shade: |
| 23 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cemont paint applied @ 2.20 kg/ 10 sqm). |
| 24 | Applying priming coat:- |
| 25 | With ready mix pink or grey primer of approved brand and manufacture on wood work(hard and soft wood) |
| 26 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture to give an even shade. |
| 27 | Two or more coats on new work |
| 28 | Supplying and applying bituminous solution primor on roof and or wall surface at 0.24 litre per sqm. |
| 29 | Grading roof for water proofing treatment with |
| 30 | Cement concrete 1:2:4 (1 cement: 2 coarse sand 4 graded stoneaggregate 20mm nominal size) |
| 31 | SANITARY INSTALLATION |
| 32 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap. 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlo lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 33 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440mm with integral type foot rests |
| 34 | Providing and fixing white vitreous china flat back or wall corner type lipped Iront urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with utomatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete. including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 35 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 36 | Providing and fixing white vitreous china pedestal for wash basin eaccompletely recessed at the back for the reception of pipes and fittings |
| 37 | Providing and fixing P.V.C. tor sink or wash basin including P.V.C. waste fittings complete. |
| 38 | Flexible pipe |
| 39 | 32 mm dia |
| 40 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (Of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass scrows and washers complete. |
| 41 | Providing and fixing PTMT liquid soap container 109 mm wide, 125each 195.80 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 42 | Providing and fixing PTMT urinal cock of approved quality and colour. |
| 43 | 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms. |
| 44 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge |
| 45 | 75 mm dia |
| 46 | 110 mm dia |
| 47 | WATER SUPPLY: |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work. including cutting chases and making good the wall etc. |
| 49 | 15 mm diameter |
| 50 | 25 mm diameter |
| 51 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 |
| 52 | 15 mm diameter |
| 53 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confcrming to 1S.8931. |
| 54 | 15 mm diameter |
| 55 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 56 | 25 mm diameter |
| 57 | Providing and placing on terrace (at all floor levels) polyethylene per litre 10.20 water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 58 | SH: Providing of Internal Electrification Installation. |
| 59 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in PVC casing and casing with mudular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 60 | Group A |
| 61 | Group B |
| 62 | Group C |
| 63 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed stel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 64 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 65 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 66 | 2X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 67 | 2 X 10 sq. mm + 1 X 10 sq. mm earth wire |
| 68 | SWITCHES AND ACCESSORIES |
| 69 | 5/6 Amp switch |
| 70 | 15/16 amps switch |
| 71 | 3 pin 5/6 amp socket outlet |
| 72 | 6 pin 15/16 amps socket outlet |
| 73 | S/F 25 amp Air Conditioner powerplug point i/c 4 module metal box on surface or in recess 4 modules plate and cover in front, 25 amp modular starter 25 amp modular socket oulet and 25 amp plug i/c connection etc as reqd. |
| 74 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 75 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 76 | S/F MODULAR BOXES BASE AND COVER PLATE |
| 77 | 1 or 2 Module (75mm X 75 mm) |
| 78 | 4 Module (125mm X 75mm) |
| 79 | 12 Module ( 200mm X 150mm) |
| 80 | S/F SP MCB DB |
| 81 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 82 | 12 way double door |
| 83 | S/F MCB Isolator |
| 84 | S/F \"B\" series SP MCB |
| 85 | Supplying and fixing 5 amp to 32 amp rating 230 V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc as reqd |
| 86 | Single pole |
| 87 | S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as reqd. |
| 88 | 43 amp |
| 89 | 63 amp |
| 90 | S/F RCCB in cubical panel board |
| 91 | P/F (following rating) RCCB in existing cubical panel board i/c drilling holes in cubical panel making connectiobn etc as reqd |
| 92 | 40 amp Two pole RCCB 100 mA/300mA |
| 93 | EARTHING |
| 94 | Earthing with copper earth plate 600mm X 600mm X6mm thick i/c accessories and providing masonry enclosure with ver plate having locking arrangement and watering pipe etc. (ut w/o charcoal or coke and salt) as reqd. |
| 95 | BUS BAR CHAMBER |
| 96 | S/F Bus bar chamber with 4 strips copper bus bar of length 900mm suitable for 400 amp capacities complete with all accessories i/c connection earthing the body etc as reqd. |
| 97 | Laying of 1 No.PVC insulated PVC sheathed power cable of 1.1KV grade of size not less than 25 sqmm drect in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd |
| 98 | FIXTURES/FITTINGS |
| 99 | S/F 48\"\" sweep (1200mm) A.C.Ceiling fan complete with down rod canopy 3 (three) blades but without regulator etc as reqd.(Make Bajaj/Usha or similar) |
| 100 | S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd. |
| 101 | S/F 1.5 ton capacty split type Air conditioner (Diamond 3 star 5G 29 G-SC 18 FD 3 WJH) complete with Indo voltage stabilizer Automatic 4 KVA (140-280 for 1.5 ton) |
| 102 | Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). Including connection etc. as required. |
| 103 | With CFL 12/15 Watts Lamp. |
| 104 | Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containingCFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). |
| 105 | Ceiling fitting (Surface) with 15/18 watt LED Lamp. |
| 106 | Supplying, Instaling, testing and commissioning of (pre-wired) bulk head fitting with glass complete containingLED lamps per fitting, complete with all accessories including connection etc. as required(havell,s /Bajaja/Phillips/Cromton). |
| 107 | With 7 Watts LED Lamp. |
