Providing And Fixing Road Furniture From Hotel Veera T Point To Kumbhari T Pointat Deulgaon Raja, Buldhana-Maharashtra

Providing and fixing road furniture from hotel Veera T Point to Kumbhari T PointAt Deulgaon Raja-Providing and Laying of 2 or more sets (6 Nos. each set Dual Ribs Pattern Rumble Markings on roads with vehicula speeds of more than 50 Km/hr lald as per the spacing recommended for each set under Table 11.1 and Flg. 11.2 of IRC 35:2015 using Plastirib 2K, or equivalent 2 component cold plastic profiled material. Each Dual Rib pattern rumble marking shall have width of 500 mm. Each dual rib pattern rumble marking shall have 2 ribs each of Width of 100 mm and height 20 mm. Gap between two ribs shall be 300 mm. Each rumble marking shall be made complete with drop on Soild Plus reflective glass beads @ 300 gm/ One Square Metre spread through out the surface of marking. The finished surface to be levelled, uniform and free from streaks and holes, Including surface cleaning and cost of all materials etc. complete. As directed by Engineer in charge Providing and applying Cold plastic paint two component rolled on surfacing materlal solvent free, high bulld two pack seamless, tough, skid resistant, materlal with has property of attaining 2.00 mm thickness in single coat application white (or as required colour) based on glass and colour retaining acralic cross linking resin system for coloured road surfacing Including surface cleaning and cost of all material etc. complete. (All Inclusive on bitumen or concrete surface) work shall carried out as per IRC 35-2015 clause 2.2) MORTH 803.4 Supplying and Fixing of Molded Shank Raised Pavement Markers/ Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total Internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTMD 4280 Type Hand complying to Specifications of Category of MORTH Circular NORW/ NH/ 33023/1097 DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 102+/-2 mm and with minimum reflective area of 13 Sq cm on each side and the slope to the base shall be 35+/-5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/-2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro -reflectance of the reflecting panel, to the Engineer. MORTH 804 Providing and fixing of retro reflectorised Informatory signboard rectangular/ Square in shape having area less than 0.90 Square Meter made out of mm aluminum sheet bonded with white retro reflective sheeting of Class ( Type IV High intensity micro - prismatic grade sheeting - HIP ) having pressure sensitive/ heat activated adhesive reto reflective specified background, border and back side retorefictive symbols, letters, numerals, arrow as per IRC : 67-2012 Table No 8.3, supported with back support frame 25 mm x 25 mm x 3 mm, duly painted on back side with two coats of grey stove enamel paint and supported on mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 cm width Including Gl fixures and transportation etc. complete. The nut bolts of board with angle Iron post/ supporting structure after fixing at site has to be electrically welded. Class BITyne IV. High Intensity micro.prismatic.grade 2 mm aluminum sheet Class B MORTH 801 Providing and fixing Cautionary/ Warning sign boards In Equllateral Triangle size of mm made out of mm aluminum sheet bonded with white retro reflective sheeting of Class C (Type XI MIcro prismatic grade sheeting) having pressure sensitive/ heat activated adhesive retoreflective specified back ground, border and back side retorefictive symbols, letters, numerals, arrow as per IRC:67 2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M.S. angle Iron post of size 65mmX65mmX6mm, 3.45 m long, duly painted with with flat oll paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards In M 25 grade concrete block of size 60cmX60cmX75 cm Including transportation etc; complete. Class C (Type XI Microprismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/ convertor Issued for field performance Including the screen printed are as and cut -out sheeting and cut-out durable transparent over lay film and this warranty certificate In original should be submitted to the Engineer in charge by the contractor/supplier. MORTH 801 Providing and fixing in position Guard Ralling as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50 mm dia. G.I. pipe 30 cm apart and fixed In M.S. channels of section 125x65x6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45x30 cm. as per detalled drawing, with 3 coats of approved yellow and black paint including necessary excavation In any strata. RD Material Testing Charges Th. Paint Royalty Charges

INR 5050 /-

INR 50.42 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB