Tender For Various Maintenance and repair Works Under Jurisdiction Of Jayakwadi Irrigation Sub-Divison N.3 Tirthapuri-55.770 Item No 1 - Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Mean (Item No. 21.04) 8.112 Item No 2 - Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneissmetal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycom bed surface and curig etc. complete. The Cement Mortar 1:3 plaster is considered for rendering un even and honeycom bed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No 24.04) 36.500 Item No 3 - Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering etc.complete. (SSR Item No 28.01) 12.012 Item No 4-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. (Item No 21.40) 6.000 Item No 5-Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/ quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Item No 24.04) 23.920 Item No 6 - Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No 27.05) 80.480 Item No 7 - Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. (Item no. 32.11) 84.440 Item No 8 - Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Item No. 32.06 40.040 Item No 9 - Providing and laying polished hand cut Kotah Stone flooring 25 mm to 30 mm thick and 45 cm to 55 cm wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. (SSR Item No 33.08) 1.220 Item No 10 - Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beam sand lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). (Item No. 25.50) 5.000 Item No 11- Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (SSR Item 39.24) 0.630 Item No 12 - Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No 23.02) 52.000 Item No 13 - Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete. (Weight of 5.5 Kilogram /sq.m.). (SSR Item No 38.04) 6.000 Item No 14 - Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram /Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram /Running metre. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram /Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram /Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram /Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/ Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box (SSR Item No 39.42) 2.400 Item No 15 - Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (SSR Item No.39.09) 7.920 Item No 16 - Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (SSR item No 40.02) 84.440 Item No 17 - Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. (SSR Item No 36.12) 80.480 Item No 18 - Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. (SSR Item No 35.13) 1600.000 Cleaning grass and removal of rubbish upto a distance of 50 meters outside the periphery of the area as directed. 5.130 Dismantling the Brick Masonry in lime or cement mortar including stacking the material with all lifts etc. complete as directed. 66.000 Excavation in all kinds of soil including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road/ embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. Complete with lead up to 1 km and all lifts as directed. 0.000 Excavation in hard murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains /catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road/ embankment including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead upto 1 km and all lifts as directed. 18.900 Providing casing embankment using selected pervious material from approved borrow are as(Privatel and-contractors own material) in layers including cost of all materials ,machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods ,levelling, sectioning edges/ sides, watering, compacting each layer to density control of not lesst han 95% of Proctor density using vibratory compactor including cost of water etc., complete with lead up to 1km for water and all lifts as directed. 16.680 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC conceteting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating stuctures, intake structures, training walls, piers, abutments etc. with Batching Plant and Transit mixer with centering, shuttering, scaffolding, placing, compacting, curing 9.580 Providing and laying in situ cement concrete of grade M-15 of trap / granite gneiss / quartzite / graded metal for foundation and bedding with Batching Plant and Transit Mixer including placing, compacting, curing etc. complete with all lifts as directed. 0.980 Providing and fixing in position TMT - FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings ,foundations, slabs, beams columns, canopies ,staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawing sand schedules .including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed. 108.000 Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish to concrete, brick surface, in all positions including scaffolding and curing etc. complete. 13.950 Providing and laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed. 4.200 Providing & fixing factory-made steel door of single leaf External Embossed Wood finish type with a)frame of size 100x58 mm conforming to IS: 4351-2003, 1.2 mm thick pre galvanized sheet with mitred and welded cones, frame stretches, hinge reinforcing plates, fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277, Zinc coating 120 GSM. Lock formed panels with internal stiffners of 3mm thick made of galvanized sheet, 3mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 kg/one sqm. c.)Finish: Power coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d) Accessories: Min 8 Anchor fastner of HILTI make, min SS Ball bearing butt hinges of dorset make, dorset mortise lock, SS Tower bolt of 200 mm size, Eye hole, Door stopper complete. 0.000 Providing and fixing steel frame door of angle 50x50x6mm with mild steel bars 16mm dia. horizontally at 10mm c/c for ventilator portion including iron holdfast boxes for fixing shutters including welding, finishing, painting etc. complete. (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.( Weight of 5.5 Kilogram/sq.m.). 30.000 Providing and erecting Y type barbed wire fencing with seven rows ofwire with 2.45 mm dia G.I. pipe (Rezan / concenti Deleted ire 0.75 mm dia) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. 0.140 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in positi on making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 11.76073 Item No-1:- Providing and fixing gauge plate of FRP sheet very sturdy both sides, gelcoat finish composite material, sandwich with M S strip by contact moulding process, engraved moulded bandwidth and figures with computerised gauge marking with reflective radium pasting, spray lamination with polyurethane chemical for surface protection including material required for fixing, nut bolts, washers, Nylon rope, hanger, drilling machine etc. complete as directed.
