Tender For Improvement And Raising Of Bus Station Rudrapur, District- Deoria - Supply and stacking good earth at site complete. DSR 16.3.9 2 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% dry density (proctor density). DSR 16.2 3 Supplying and filling in plinth with sand under floors, including watering ramming, consolidating and dressing complete. DSR 2.27 4 Dismantling of brick on edge paving including stacking of dismantelled materials at site with in50 M distance. SOR 5 Dry brick on edge flooring in required pattern with bricks of classdesignation 7.5 on a bed of 12 mm mud mortar, including filling joints withlocal sand, with common burnt clay non modular bricks. DSR 11.2 6 Laying old brick on edge paving with old servecable bricks laid in required line omplete. SOR DEORIA 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge.DSR2.6.1 All kinds of soil complete. 8 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:4:8 (1 cement: 4 approved coarse sand :8 gradedstone aggregate 40 mm nominal size) 9 Brick work with common burnt clay (non modular) bricks of Class-150in foundation and plinth in cement mortar1:4(1 cement :4 coarse sand . (SI 6.1.1) 10 15 mm cement plaster finished with a floating coat of neat cementof mixDSR1:3 (1 cement : 3 coarse sand) DSR 13.10 11 15 mm cement plaster finished with a floating coat of neat cementof mixDSR1:4 (1 cement : 4coarse sand) DSR 13.8.2 12 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.2.1 13 Centring and shuttering including shuttering, proping etc and removal of Lintals, beams,plinth beams, girders,bressumers and cantilevers with water proof ply 12 mm thickDSR 5.9.21 14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .DSR 5.22.1Mild steel and Medium Tensile steel bars 15 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2dsr 11.4 16 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSr 15.56 17 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. DSR 15.4 18 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. in Cement mortor.DSR15.7.4 19 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :15.12.1 Of area 3 sq. metres and below 20 Brick work with common burnt clay (non modular) bricks of designation 7.5in super structre above plinth level up tofloor V level in cement mortar1:4 (1 cement :4 coarse sand . (SI 6.4.1) 21 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level ement mortar 1:4 (1 cement :4 coarse sand) DSR 6.13.2. 22 Providing and laying3.00 mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : 23 12 mm. cement plaster of mix 1:4 (1 cement :4coarse sand) (SI 13.4.1) 24 12 mm. cement plaster of mix 1:4 (1 cement :4fine sand) (SI 13.1.1) 25 Extra for plastering groined eling DSR 13.25.2 26 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:DSR 9.20.2 30 mm thick including ISI marked Stainless Steel butt hinge swith necessary screws 27 Extra for Providing& fixing flush door shutters with decorative veneering instead of non deorative isi marked flush door shutters confirming to IS:2202part I) 9.22.1 on one side only. 28 Extra for Providing lipping with 2nd class teak wood battens 25mm minimum depth on the eedges of flush door shutters (over all area of door shutter to be measured) 29 Providing & fixing ISI marked oxidised M.S. sliding door bolts with nuts & screws etc coimplete 300x16mm DSR 9.62.1 30 Providing & fixing ISI marked oxidised M.S. Tower bolt blackfinish(barrel type) withneessary screws etc coimplete 300x16mm DSR 9.63.1 31 Providing & fixing ISI marked oxidised M.S. handles confirming to IS 4992 withneessary screws etc coimplete 300x16mm DSR 9.66.1 32 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR13.88 33 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 34 Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm i/call material, labour, T & P etc complete for proper completion of work. 13.47.1 35 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer 36 Painting two coats over priming coat on steel or other metal surfae upto 10cm with or grith or smal artiles not exeeding 0.10 sqmt. In areas with superior synthetic enamel paint complete. DSR 13.48.3 37 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum 38 Providing and fixing 4.00 mm thick 40 mm wide glass strip in the joints of c.c. floor omplete. DSR 11.13.1 39 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 40 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 41 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of100 mm diameter DSR 12.39.1 42 Providingand fixing plain bend of required egree for 100mmdia pipes DSR 17.38.1.1 43 Providing and fixing PTMT gratings of approved quality and colour circular type 100 mm nominal diameter complete. DSR 18.58.1.1 44 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 45 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. for20mm nominal dia Pipes DSR 18.8.2 internal work 46 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. for20mm nominal dia Pipes DSR 18.7.2external work 47 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20mm nominal bore DSR 18.17.1A 48 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm nominal bore 49 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. DSR17,23 50 Providing and fixing uplasticised PVC connection pipe with brass unions :60 cm length 20 mm nominal bore 51 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete semi rigid pipe 17.28.1.1 32 mm dia 52 Transportation and hire charges for boring of hand pump required T&P bit & pipe, housing pipe, tripod etc to site of work and errection in position and dismantling same after proper completion of the work as per direction of engineer in charge 53 Supply of 110 mm dia PVC casing pipe for boring Prince, Supreme, Kisan & Jain or other approved make 6kg/cm2 with PVC socket jointed properly supply all materials labour and T&P complete. 54 Same as itemAbove but 110 mm dia PVC slotted pipe approved make with PVC socket jointed properly supply all materials labour and T&P complete 55 Boring charges for 110-125 mm dia pipe by hand or machine in all type streta except hard rock, complete as per direction of 56 Supply & fixing of naylon jali around the slotted pipe as required complete 57 Supply filling of coarse sand around the bore well as per direction of Engineer in charge complete 58 Supply lowering of 32 mm dia GI pipe B class In 3.05m length with including required socket complete including supply all materials, labour T&P require for proper competion of the 59 Supply of India Mark II hand pump machine with MS connecting rod 12 mm ia in 3.00 m length acessories handle, chain, cylinder, reducer etc supply all materials, labour T&P require for proper completion of the work 60 Installation of India Mark II hand pump machine over the bore well as per direction of engineer in charge 61 Development of bore by manual labours till discharge obtained free from turbity complete 62 Supply and fixing of 110 mm OD PVC well plug of heavy quality complete 63 W/P for light with 1.50 sqmm. FRPVC insulated multistrand single core copper conductor cablein PVC conduit pipe on surface complete with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable as earth wire drawn in side the conduit,121C 64 W/P for fan/Fresh Air Fan with 1.50 sqmm. FRPVC insulated multistrand single core copper conductor cablein PVC conduit pipe on surfacecomplete with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable as earth wire drawn in side PWD 123 C 65 W/P for plug with 1.50 sqmm. FRPVC insulated multistrand single core copper conductor cablein PVC conduit pipe on surface complete with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable as earth wire drawn in side the conduit,PWD 124 C 66 W/P for H.P.M.V./Sodium Vapour with 2.5 sqmm. FRPVC insulated multistrand single core copper conductor cablein PVC conduit pipe on surface complete with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable as earth wire drawn in side complete. S.I. 126(C) 67 Supply & fixing of power plug with 20A/250 volts flush type modular switch and 5 pin 20 A/250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of the work. S.I. no 1139 A 68 Add for light/fan points with modular type switch in place of piano type switch.S.I. no 187(A) 69 Add forplug points with modular type switch in place of piano type switch.S.I. no 187(c) 70 Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gaugePVCconduit pipe along on surface, including matching colour wash etc complete in all respects. (i)2 x 2.5 sq. mm. copper cable with 1 no 1.50 FRLS PVC insulated copper earth continuity wire,in 20 mm Dia conduit.1301 © 71 (ii)Supply wiring sub main 2 x 4 sq. mm. copper cable with 1 no 2.50 sqmm FRLS PVC insulated copper earth continuity wire, in 20 mm Dia conduit.211C 72 S/F of surface / flush mounting SPN Distribution board without MCB complete in all respects as directed at site by Engineer-in-charge. 4 ways complete. S.I. no1024 Cat A S.I. no1022 73 Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA) Cat-A S.I. no 1002 74 S/F of 40 Amp DP isolator (10 KA) Cat A1005 A 75 Supply& laying of aluminium conductor PVC insulated armored served seathed cable1100 V grade 16sqm 4 core S.I. no 501(i) 76 Supplyandfixing of LED Bulb 23 watt approved make complete. 77 S/Foffactorywired, LED Tubelight with batten suitable for 1x22 watt& without end covers for 1 no 22 watt LED lamp complete in all respect.S. I. no 1413 CAT AAA 78 Supply of Ceiling fans with fan moter of AC permanent insulation , capacitor rating to conforming BEE 5 star rating & IS 374/79 and also comply with IS: 1709/1984 with latest amendment . The rated Voltage 220/240 Volts, 50 Hz I-ph AC assemble should consists of down rod, blades, shackle canopies etc. and with double ball bearing system . BEE 5 Star Rated - 1200mm sweep 79 Supply & fixing ofelectronic Fandimmer, 300/400 watt, ISI marked, ontheexisting switch board includingmaking connections, required material,labourT/Petc.for proper completionofworkto the satisfaction of Engineer of work. S.I. no 1203 80 Erection and testing of ceiling fan/exhaustand regulator etcfor room height upto 3.50 M including supply of 3.00 mm thick G.I. rod19mm dia duly painted complete in all respect. 81 Supply & fixing of batten/ angle batten holder complete. In all respect. 82 Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 8SWGG.I. wirein 15 mm dia. GI pipe uptoswitch board (from apron to switch boardthecost of GI pipe & GI wire willbeextra)300mm square C.I. box with hinged cover,masonary housing alternate layer of charcoal/ coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect. S.I. no 703 83 Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects. 84 S/F of LED street light fitting having die cast aluminium body and diffuser with driyer set Suitable for 75 to 90 watt. Confirming to IP 65 Protection complete in all respect. (S.I. No. 1423) Cat AA
