Tender For Construction Work Of A Shop Next To The Nagar Panchayat On Bahuli Road In Nagar Panchayat Kurara - Boring Of Hole Under Reamed Piles By Hand Operating Auger In B.C. As Per I.S. Code 2911 (Part-Iii) 1980 30 Cm Dia S.U.R. With 50 Cm Dia Bulb, 3.6, hamirpur-Uttar Pradesh

Tender For Construction Work Of A Shop Next To The Nagar Panchayat On Bahuli Road In Nagar Panchayat Kurara - Boring of hole under reamed piles by hand operating auger in B.C. as per I.S. Code 2911 (Part-III) 1980 30 Cm dia S.U.R. with 50 Cm dia bulb, 3.65m in depth 2 RCC work in 1:1.5:3 with cement sand and 20 mm. Gauge granite stone grit including in piles. SI No. 288 3 Mild steel or Iron work in plain work including its cutting & bending with all labour T&P etc. SI No. 504 4 M-150 class brick work in 1:4 cement sand mortar including all labour T&P in super structure. 5 12 mm thick plaster work in 1:5 with cement sand mortar including supply of all material labour T&P SI No. 586 6 E/w in filling by cartage earth lead upto 4.00 Km distance away from site work by tractor trolly. 7 Sand filling including supply of all material labour T&P SI. No. 255 8 Cement Concrete in 1:4:8 with 40 mm gauge OBB ballast including supply of all material labour T&P 9 4 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm (3/4) graded approved stone laid in panels finished with 3mm (1/8) floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8cm (3) thick base concrete consisting of cement fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints ofthe panels if any and giving them a uniform finish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. without base concrete (As Per S.I. No.-602) 10 Supplying and fixing of rolling shutters of approved make of 80x1.25 mm (3x3½ gauge) cold rolled MS: laths inter locked throughout their entire length and joined together at the end locks and mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 11 Providing and fixing 27.5 mm long wire springs grade 2 for rolling shutters. 12 Providing and fixing top cover for rolling shutters. 13 Providing and fixing ball bearing for rolling shutters. 14 Painting or Varnishing on New iron work. 15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 16 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 17 Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroghtto required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work 18 Providing and fixing stainless steel (Grade 304) railing made of Hallow tubes channels, plates etc. including welding grinding buffing polishing and making curvature (whereever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with neccessary accesories &stainless steel dash fasteners, stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangements as per approval of Engineer incharge. (For payment purpose only weight of stainless steel members shall be considerd excluding fixing accesories such as nuts bolts fasteners etc. ) D.S.R.No. 10.28 RATE 19 Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm *600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement, 3 coarse sand) finishing with cement stury & with pigment grouting & polishing complete I/C S/o all material labour T&P etc required for proper completion of work excluding base concrete. 20 FOR GATE WORK -Earth work in excavation for drain 21 Sandfilling in foundation with complete work. 22 P.C.C. work in 1:4:8 cement sand with stone ballast in bed of drain 23 class-150 brick work in 1:4:8 cement and finesand of 1.25 fineness modulus mortar in foundation and plinth including supply of all materials, labour and tools and plants etc. Required for proper completion of the work. 24 P.C.C. work in 1:2:4 cement sand with stone ballast in bed of drain 25 12mm thick plaster on brick work minimum thickness not less than 10mm with cement and fine sand of fineness modulus mortar in 1:4. 26 RCC work in 1:2:4 with cement sand and 20 mm. Gauge granite stone grit including Supply of all Material & T&P. 27 Mild steel or Iron work in plain work including its cutting & bending with all labour T&P etc. SI No. 504 28 Finishing walls with water proff cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour, tools and plants etc. required for proper completion of work. 29 Adding for internal electrification work. 12.5% 30 Add 5% for water Supply & Sanaitary Fitting

INR 2610 /-

INR 19.33 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB