|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thicknes, including Naintak or similar pattern roof coverings of any description etccomplete all as specified and directed |
| 2 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified . |
| 3 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises and removing the debris outside from defence land complete all as specified and directed . |
| 4 | Dismantling unframed timber scantling 40 sqm and over in section,in any position all as specified and directed |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 6 | Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed. |
| 7 | Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames. |
| 8 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed |
| 9 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, velly Gutter fixed with self tapping screws all as specifiedincl dismentalling existing sheetcomplete all as specified and directed |
| 10 | S&F 1.25mm thick Mild steel sheet / PVC eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges |
| 11 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mmduly suspended with 2mm dia SS bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified. |
| 12 | S&F for 5mm thick PVC sheet fillets of width 35mm for wall panelling including of fixxing on to wall making PVC frame as per specification and drawing complete all as specified and directed |
| 13 | M&L for solid PVC wall lining consisting of 5mm thick plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed. |
| 14 | M&L 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate in floor to receive the surface of tiles complete all as specified and directed |
| 15 | S&F light shade vitrified ceramic tiles 8 to 10mm thick area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, each in floors with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed. |
| 16 | S&F light shade vitrified ceramic tiles 8 to 10mm thick on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | S&F Non skid ceramic colour floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement |
| 18 | S&F Non skid ceramic colour floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqmin floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement |
| 19 | M&L for coloured Glazed ceramic tiles in vertical surface such as dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 complete all as specified and as directed. |
| 20 | M&L 20mm thick granite work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layerin cement mortar 1:6etc complete all as specified and directed. |
| 21 | S&F for Steel work in tubular trusses, post, purlin including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st 240 complete all as specified and directed |
| 22 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, pipe, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A complete all as specified and directed. |
| 23 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long - 11 to 15mm Diameter of neck complete all as specified and and directed. |
| 24 | S & Fsolid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified & directed. |
| 25 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II). |
| 26 | S&F powder coating (minimum thickness pf power coating 50 micron) anodised aluminium frame for door, window, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 27 | S&F powder coating (thickness power coating not less than 50 micron) anodised aluminium door shutters aluminium section weighing 0.55kg/m including necesarry joining cleats glazing clips rubber neoprene packing,handle 2 Nos in each door anodised aluminum snap beading screw and mortice lock vertical type Brass 2 levers, size 100 mm etccomplete all as specified and directed. |
| 28 | S&F powder coating (thickness power coating not less than 50 micron) anodised aluminium window and ventilator shutters,fixed type withoursash bar aluminium section weighing 0.55kg/m including necesarry joining cleats glazing clips rubber neoprene packing, anodised aluminum snap beading screwlock etc complete all as specified and directed. |
| 29 | S&F Sheet glass 4.8mm thick clear/sun shade colour glass, ordinary quality and glazing with oil putty in squares exceeding 0.5sqm in each pane complete all as specified and directed. |
| 30 | S& F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed. |
| 31 | M&L for fixing 4 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all necessary items to fix with frame and all as specified and directed. |
| 32 | S&F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded dhutter for for kitchen, cupboard, the laminated shutter should be pre laminated side with different design and other side plain white of density not less than 600 Kg/cum manufactured by an ISO 9001:2015 certified company, the 18mm board should be 100% lead free , water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. |
| 33 | S&F 40mm flap width of continuous (piano) hinges, mild steel bright finish or electrogalvanised. |
| 34 | S&F 40mm cupboards knob fixed with nut Screw and washer of brass polished complete all as specified and directed. |
| 35 | S & F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plateincluding one shop coat of primer complete all as spd and directed |
| 36 | S & F Second class hardwood plain, solid straight chowkhets and frames, wrought, framed rebited on the solid, rounded or chamfered, put together with glues pinned at joints, 2nd class HW complete all as specified and directed |
| 37 | M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling ofhollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed. |
| 38 | S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc,size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed. |
| 39 | S&F IInd hardwood 40 mm plain framed pannelled shutter (any number of pannels) with panels of timber flats on bothe sides (feather edged) or of veneered particle board medium densitywood particle board with commerical face veneers supplied and fitted to chowkats |
| 40 | S&F 100mm size Stainless steel butt hinges complete all as specifed and directed |
| 41 | S&F Stainless steel barrel tower bolt 200mm long of extruded section and fixed complete. |
| 42 | S&F Stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified. |
| 43 | S & F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed |
| 44 | S&F for aluminium (extruded section) bodydoor closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 45 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 46 | M&L for preparation of previously untreadted surfaces old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paintall as specified. |
| 47 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 48 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed. |
| 49 | S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 50 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 51 | S&F in repairs one piece EWC with soft close seat cover and twin flush fittings 660 x 365 x 765 mm (snow white) S trap/P trap 300mm and fittings complete all as directed and approved by GE (Make Cera and cat No S1013105 & equivalent). |
| 52 | S&F in repair viterous China squatting pan, `Orrisa\" pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed. |
| 53 | S&F in repairVitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles(excludingflushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and as directed. |
| 54 | S&F in repair of PVC low level flushing cistern dual flush top push,10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle, flush pipe incl CP bracket |
| 55 | S & F in repairs Vitreous China half stall Urinal or bowl type pattern, basin only including connections to flushing pipe, urinal spreader, waste pipe and outgoing pipes fixed in repairs (excluding flushing cistern)complete all as specfied and as directed. |
| 56 | S&Fin repairs Viterous China wash basin with full/half Pedestal, white, flat back, size 550x400mmexcluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed. |
| 57 | S&Fin repair 15mm dia 600 mm long PVC connection including brass check nut at both endsscrewed both endfor iron pipes. |
| 58 | S&F in repairs CP Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. |
| 59 | S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 60 | S&F in repair stop valves/angle valves fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore pipe complete all as specified and as directed |
| 61 | S&F as 15mm bore Pillar Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixedall as specified and as directed |
| 62 | S&F in repairs 600x450 mm size of 5.5mm thickness looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 63 | S & F 500 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top)with Ball brass valves, high pressure, with20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position inclrefixing of inlet, outlet & over flow pipe all as specified in SSR Part I |
| 64 | S & F 1000 ltr Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top)with Ball brass valves, high pressure, with20 mm polythene float and flynut complete, screwed for iron pipe or brass ferrule hoisted and fixed in position inclrefixing of inlet, outlet & over flow pipe all as specified in SSR Part I |
| 65 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm/150MM |
| 66 | S&FPVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed. |
| 67 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed |
| 68 | M&L for PCC 1:3:6type C-2 (40mm grade stone aggregate) as in bed to 110/100 mm dia SGSW /PVC pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 69 | S&F 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 70 | S & F PVC(SWR) bends/sockets any radius 110 mm dia complete all as specified and directed |
| 71 | S& F stack clamp,110mm/75mm bore made out of 50mm by 5 mm flat iron/pvc and 16 mm dia round stays including bolts and nuts and securing ends of stay to wall or roof complete all as specified and directed |
| 72 | Hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ puttycomplete all as specified and directed.. |
| 73 | S& Ffor 3 mm thicksheet glass ordinary quality and glazing with oil putty wire clipsin square n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 74 | M&L for Excavation in post holes (or similar holes) each not exc 0.5 cum getting out, returning filling in and rammin earth or broken rubble mixed with earth around in layers not exc 25 cm watering, and removing surplus soil to a distance not exc 50mtr and making good surface in soft/loose soil. |
| 75 | M & L PCC Type C2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete. |
| 76 | Demolition of brick workor stone boulder masonry built in cement mortar or cement limeincluding all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 77 | M&L for brick work with sub class \"B\" bricks built in CM 1:6 straight orcurved on plan & exc 6 m mean radius with old size bricks. |
| 78 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and directed. |
| 79 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finished even and smooth (without using extra cement)completeall as specified and directed. |
| 80 | M&L for rendering 15mm thick in CM 1:4 other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 81 | M&L for preparation of new plastered or unplastered surface of walls including cornices, pilasters etc andapplying two coats of oil bound distemper over a coat of 1mm thick wall care puttyincluding Washing floors, cleaning glass, joinery, electric fittings,wiring etc of drops and splashes and leaving premise, clean and tidy etc complete all as specified and as directed. |
| 82 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying Weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. |
| 83 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified. |
| 84 | M&L for preparation of old painted steel surfaces of and on iron work of any description over 10 cm width or girth not otherwise described andapplying one coat (finishing coat) of synthetic enamel paint in any tint complete all as specified and as directed. |
| 85 | S & F for Draperly rod/Harrison rails of CP of 25 mm dia with fixing brackets, Stops rollers and rings etc complete all as specified and directed. |
| 86 | M&L for Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth without using extra cement including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified. |
| 87 | S&F Welded steel wire fabric (mesh) Weight N. exc 4 kg per square metre any size supplied and fixed complete to wood or steel members complete all as specified and Directed |
| 88 | M & L Water Proofing treatment on RCC roof etc comprising with the following operations and as specified herein below :-(a) Taking down/scrapping out existing old tarfelt bituminous compound including sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n exc 250m. (b) 15mm thick plastering in cement mortar 1:4 mixed with WPC @3% by weight of cement finished even & smooth and curing for minimum 7 days(c) Preparing & Cleaning of fully dried cement plastered surface(d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per Sqm conforming IS 3384-1986(e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 Kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be applied over bituminous primer as specified above application of polymeric membrance shall be by torch application. The overlap shall be minium 100mm on transverse direction and 75mm on longitudinal direction complete all as specified and directed. |
| 89 | M & L for one coat of aluminium paint over the APP modified membrane @ 0.11 Kg/sqm complete all as specified and directed. |
