}

Tender For Under District Sultanpur, Major Repair Work At Kasturba Gandhi Residential Girls School, Dostpur - Demolishing R.C.C. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Le, sultanpur-Uttar Pradesh

Tender Notice

51850515
Tender For Under District Sultanpur, Major Repair Work At Kasturba Gandhi Residential Girls School, Dostpur - Demolishing R.C.C. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Le
Tender
Indian
Uttar Pradesh
Sultanpur
29-10-2025

Tender Details

Tender For Under District Sultanpur, Major Repair Work At Kasturba Gandhi Residential Girls School, Dostpur - Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge., DSR 2023- 15.3 3 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge., DSR 2023- 15.7.4 4 Dismatlingexistingplasterincludingdisposal of refuse as directed by the Engineer-in-charge with in a distance of 60 metres (200 feet)., DSR 2023- 15.56 5 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. , DSR 2023- 2.8.1 6 Providing and laying PCC 1:6:12 (1 cement : 6 fine sand : 12 graded brick aggregate 40 mm. nominal size) i/c supply of all materials. Labour and T&P etc. SI No. 273, SOR 2025- 273 7 P/L of 80mm thick Rubber Mould ZigZag Shapped inter locking tile over base coat., SOR 2026- 16 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand), DSR 2023- 6.4.1 9 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., DSR 2023- 5.3 10 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform., DSR 2023- 5.9.3 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D, DSR 2023- 5.22A.6 12 12 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand), DSR 2023- 13.4.1 13 Providing and applying white cement based putty ofaveragethickness1mm,ofapprovedbrand and manufacturer, over the plastered wall surface to prepare the surface even and smooth Complete., DSR 2023- 13.8 14 FinishingwallswithPremiumAcrylicSmooth exterior paint with Silicone additives of requiredshade:Newwork(Twoormorecoats applied@ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm), DSR 2023- 13.46.1 15 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary crews, all as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately.30mm, DSR 2023- 9.1 16 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators I/C all work., DSR 2023- 10.11.1 17 Providingandlayingvitrifiedfloortilesin differentsizes(thicknesstobespecifiedby themanufacturer)withwaterabsorptionless than0.08%andconformingtoIS:15622,of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3kg/sqmincludinggroutingthejoints withwhitecementandmatchingpigmentsetc., complete.Size of Tile 600x600 mm, DSR 2023- 11.41.2 18 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1stquality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4(1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. , DSR 2023- 11.39 19 Paintingtwocoatsoverpreviouslypaintedon steel, wooden & other metal surfaces upto 10 cm widthorsq,mtinareaswithsuperior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade & incl. cleaning the surface of all dirt, dust & other foreighn matter sand preparingandknottingincl.costof alletc. required for proper completion of work., DSR 2023- 13.62.1 20 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken ricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. 21 (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge” With average thickness of 120 mm and minimum thickness at khurra as 65 mm., DSR 2023- 22.7.1 22 G.I. Pipe Class B 15 mm. dia , DSR 2023- 18.11.1 23 G.I. Pipe Class B 20 mm. Dia, DSR 2023- 18.11.2 24 G.I. Pipe Class B 25mm. dia , DSR 2023- 18.10.3 25 G.I. Pipe Class B 32mm dia, DSR 2023- 18.10.4 26 Providing and fixing soil, waste and vent pipes : 100 mm dia. , DSR 2023- 17.35.1.1 27 C.P. Bib cock heavy quality 15mm dia Ch. 21 Sr. 44, DSR 2023- 18.15.1 28 Stop cock heavy quality 15mm dia Ch. 21 Sr. 46, DSR 2023- 18.15.1 29 Supply and hosting of low density polythene seamless one pease moulded tanks and placing the samein proper positionfor 500 leter as per 730 NBO, DSR 2023- 18.48 30 Anglo indian W.C. Pan 450mm. asS.no.05, DSR 2023- 17.2.1 31 Wash hand basin 550x400 mm size of white glazed earthen ware (22x16) as S.no.12, DSR 2023- 17.7.3 32 Mirror of Atul make with Indian polish of 600x450 mm dia size with bevelled edge Each 16, DSR 2023- 17.31 33 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with mdular type switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C, DSR 2023- 1.10.3 34 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required., DSR 2023- 1.12 35 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire., DSR 2023- 1.14 36 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire., DSR 2023- 1.14.1 37 Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required., DSR 2023- 1.14.2 38 Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required., DSR 2023- 1.29 39 Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 poles and earth metal enclosedplug top alongwith 20amps. C curve, SP MCB in sheet steel enclosure, on surface or in recess, with chainedmetal cover for the socket outlet, and complete with connections, testingandcommissioning etc. as required. , DSR 2023- 1.3 40 Supply and fixing offollowingsizes of medium class PVC conduit along with accessories in surface/recess including cuttingthe wall and making good the same in case of recessed conduit as required : 20 mm., DSR 2023- 2.18 41 Supply and fixing offollowingsizes of medium class PVC conduit along with accessories in surface/recess including cuttingthe wall and making good the same in case of recessed conduit as required : 25 mm., DSR 2023- 1.21.1 42 Supply and fixing offollowingsizes of medium class PVC conduit along with accessories in surface/recess including cuttingthe wall and making good the same in case of recessed conduit as required : 32 mm., DSR 2023- 1.21.2 43 Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C series,miniature circuit breaker (MCB)suitable for inductive load offollowingpolesin the existingMCBDBcomplete with connections, testing andcommissioning etc. as required. single pole, DSR 2023- 1.21.3 44 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existingMCBDBcomplete with connections, testing andcommissioning etc. as required. 63 A, DSR 2023- 2.10.1 45 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required., DSR 2023- 2.14.3 46 Supplyandlayingof aluminiumconductorPVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.16 sq. mm 4 core , PWD Ele 2025 - 20a.1.9

Key Value

Document Fees
INR 2354 /-
EMD
INR 111000.0 /-
Tender Value
INR 55.34 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail