tender for annual civil maintenance work of under o & m sub-division jalgaon u-1, under o & m division jalgaon tq. & dist. - jalgaon excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) 10.00 207.00 cum 2070.00 2 excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) 10.00 227.00 cum 2270.00 3 filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 10.00 776.00 cum 7760.00 4 providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 10.00 1764.00 cum 17640.00 5 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand 10.00 6378.00 cum 63780.00 6 providing and laying cast in situ/ready mix cement concrete m15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.) 10.00 6939.00 cum 69390.00 7 removing lime or lean cement concrete including stacking the spoils as directed with all leads lifts, complete. spec. : as directed by engineer in charge. 10.00 558.00 cum 5580.00 8 providing and fixing in position tmt - fe - 500 bar reinforcement of various diameters for r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 99.00 90.00 kg 8910.00 9 providing and applying dr. fixit pidicrete urp (sbr eec/cccm/dn/jal/t-59/2025-26 page 56 of 69 55 latex for waterproofing and repairs) as one part of dr. fixit pidicrete urp, one part of water and 3 parts of fresh opc cement continue mixing slurry during application & apply to cracks on slab/terrace , union of slab-parapet, etc as directed by engineer in charge until stoppage of leakages on a particular slab/terrace etc. complete a dr. fixit pidicrete urp (brush/roller/etc all necessary equipments) 10.00 424.00 kg 4240.00 b cement 10.00 327.00 bag 3270.00 c sand 3.00 1874.00 cum 5622.00 10 dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. 10.00 335.00 cum 3350.00 11 dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts etc. 10.00 380.00 cum 3800.00 12 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. 5.00 8501.00 cum 42505.00 13 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. complete. 5.00 8262.00 cum 41310.00 14 providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm x 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 10.00 1178.00 sqm 11780.00 15 providing external cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. 10.00 393.00 sqm 3930.00 16 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 with neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 10.00 350.00 sqm 3500.00 17 providing sills of polished kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. 10.00 1084.00 sqm 10840.00 18 dismantling flat wooden or a.c. sheet ceiling including stacking the materials as directed with all leads, lifts etc. complete. 10.00 50.00 sqm 500.00 19 providing and fixing false ceiling of 12mm thick as per drawings including powder coated g.i. wall angle of 20mm x 20mm size, g.i. grid runners of size 20mm x 38mm at 600mm center to center both ways and suspended using g.i. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. 10.00 1527.00 sqm 15270.00 20 removing g.i. or a.c. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete 10.00 89.00 sqm 890.00 21 providing and fixing colour coated zincalume ( r ) az150 ( min 150 gms/sq.mt. total on each side ) profiled sheets 10.00 1173.00 sqm 11730.00 eec/cccm/dn/jal/t-59/2025-26 page 57 of 69 56 for roofing. the feed material is manufactured out of nominal 0.45 mm base metal thickness ( bmt ) (0.5 mm tct ), hi-strength steel with min.550 mpa yield strength, metallic hot dip coated with aluminium-zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond ( r ) steel quality super durable polyester paint coat ( with inorganic pigment). the paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. the end rib shall be designed for anticapillary groove. and return leg. the feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 22 providing and fixing of colour coated zinc aluminium( r ) az150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. the feed material is manufactured out of nominal 0.45 mm base metal thickness ( bmt ) (0.5 mm tct ), hi-strength steel with min.550 mpa yield strength, metallic hot dip coated with aluminium-zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond (r) steel quality super durable polyster paint coat (with inorganic pigment). the paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mm center- to-center. the end rib shall be designed for anti-capacity groove. and return leg. the feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete. (weight of profile 4.52 kilogram/ one square metre) 600 mm girth (surface width). 10.00 751.00 sqm 7510.00 23 providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 10.00 98.00 kg 980.00 24 providing structural steel work in hollow section of various thickness and sizes in square, rectangular and round shape from 25mm to 450mm section as per is 4923 yst 310 grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 10.00 119.00 kg 1190.00 25 removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 10.00 45.00 sqm 450.00 26 providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is. 10.00 1185.00 sqm 11850.00 eec/cccm/dn/jal/t-59/2025-26 page 58 of 69 57 15622-2006 ( group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete 27 providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is. 15622-2006 ( group bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete 10.00 1260.00 sqm 12600.00 28 providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding i.s. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 5.00 1264.00 sqm 6320.00 29 providing and laying antiskid ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to is 15622- 2006 (group-b iia) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 5.00 1208.00 sqm 6040.00 30 removing doors and windows with frame and stacking the materials as and where directed with all leads, lifts complete 4.00 156.00 no 624.00 31 repairing of old door in all respect by using approved material in quality and make including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by engineer in-charge. a replacement of damaged aldrop 300 mm chromium plated 5.00 375.00 no 1875.00 b replacement of damaged alluminium handle 125 mm 5.00 178.00 no 890.00 c replacement of damaged alluminium butt hinges of 125 mm 5.00 295.00 no 1475.00 d replacement of damaged tower bolt 300 mm chromium plated 5.00 190.00 no 950.00 e replacement of damaged lock 1.00 247.00 no 247.00 32 providing and fixing m40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to i.s. 65241983 having 6 mm dia. bars 3 nos. and stirrups @250 mm c/c and fixing in wall with 6 nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . 3.00 1066.00 rmt 3198.00 33 providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with french polish etc. complete. 2.00 3079.00 sqm 6158.00 34 providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per is 14856 (2000) (reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. 2.00 3274.00 sqm 6548.00 35 providing and fixing in position (as per 1868 / 1982) aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/rmt.. top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 5.00 4968.00 sqm 24840.00 eec/cccm/dn/jal/t-59/2025-26 page 59 of 69 58 kg/rmt. the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/rmt. inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/rmt. as per detailed drawings and as directed by engineer incharge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with powder coating without box. 36 repairing of old window in all respect and fixing the same as directed by engineer in charge. a glass obscured (bajara) 5mm 2.00 715.00 sqm 1430.00 b jali fly proof 2.00 312.00 sqm 624.00 37 providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete 2.00 3467.00 sqm 6934.00 38 providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. 2.00 1707.00 sqm 3414.00 39 removing wooden or a.c. partition including frame work and stack-ing the materials as with all leads, lifts etc. complete. 2.00 40.00 sqm 80.00 40 re-fixing old novapan partition / aluminium partition including fixing material in all respect as directed by engineer in charge. 2.00 1038.00 sqm 2076.00 41 providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with bwp type exterior grade phenol formaldehyde synthetic resin conforming to is 129231990, laminated on both sides, novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. 2.00 3968.00 sqm 7936.00 42 providing and fixing in position, single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , i.s.i. mark , heavy duty, hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, pvc gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc. complete 2.00 8152.00 sqm 16304.00 43 removing wc pan including disconnecting the sanitory and water supply connections, removing and breaking flooring and bed concrete around the pan, removing the same carefully and stacking the serviceable materials as and where directed including of throwing the unserviceable materials outside providing and fixing orissa type white glazed earthenware 575 mm water closet pan including s trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 2.00 4007.00 no 8014.00 45 providing and fixing european type white glazed earthenware water closet pan with upvc seat and lid with chromium plated brass hinges and rubber buffers including upvc and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by ex. engineer is necessary before use) 1.00 10768.00 no 10768.00 46 providing and fixing 15 cm rigid pvc nahani trap including pvc grating , bend, connecting piece of upvc pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( prior approval of sample and brand by ex. engr. is necessary before use) 3.00 571.00 no 1713.00 47 removing urinal pans or wash hand basin with frame including disconnecting the sanitory and water supply connections, removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials outside. 3.00 96.00 no 288.00 48 providing and fixing white glazed earthenware wash hand basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including p.v.c. waste pipe and trap up to the outside face of the wall. making good the damaged surface, testing etc. complete. 1.00 5750.00 no 5750.00 49 providing and fixing on walls/ ceiling/ floor ..........mm dia. cpvc pipe with necessary fittings, remaking good the demolished portion etc. complete. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete a 20mm dia cpvc pipe 11.00 310.00 rmt 3410.00 b 25mm dia cpvc pipe 16.00 375.00 rmt 6000.00 c 40mm dia cpvc pipe 9.00 539.00 rmt 4851.00 50 providing and fixing 15 mm dia. screw down bib/ stop taps of brass including necessary socket union nut complete. 10.00 671.00 no 6710.00 51 providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 10.00 970.00 no 9700.00 52 providing and fixing 15 mm. dia ball cock medium type with pvc float including sockets and necessary fittings and tested as per municipal requirement etc. complete. 10.00 487.00 no 4870.00 53 providing, laying and fixing p.v.c. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. 10.00 594.00 rmt 5940.00 54 providing and fixing h.d.p container syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. 1000 14.00 ltr 14000.00 55 providing and constructing brick masonry inspection chamber of size ....................including 1:4:8 cement eec/cccm/dn/jal/t-59/2025-26 page 61 of 69 60 concrete foundation 1:2:4 cement concrete channels half round g.s.w. pipes, brick masonry, plastering from inside and with frame fixed in cement concrete with r.c.c. cover medium duty 140 kg with frame etc complete. a 60cm x 45cm x 90cm 1.00 9160.00 no 9160.00 b 90cm x 45cm x 90cm 1.00 10777.00 no 10777.00 56 providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. medium duty (140kg) 2.00 4072.00 no 8144.00 57 providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. 2.00 2952.00 no 5904.00 58 providing and fixing white glazed earthenware lipped flat back/corner type urinal with pvc 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter p.v.c. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. 2.00 4788.00 no 9576.00 59 removing white wash or colour wash by steel wire brushing and / or scrapping by sand paper and preparing the wall surface smooth including necessary repairs to scratches etc. complete. 10.00 7.00 sqm 70.00 60 providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make, etc complete. 10.00 90.00 sqm 900.00 61 providing and applying priming coat on concrete/ masonary/ asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. 10.00 36.00 sqm 360.00 62 providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. 10.00 80.00 sqm 800.00 63 providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat scaffolding if necessary, and watering the surface for two days etc complete. 10.00 295.00 sqm 2950.00 64 providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete 10.00 96.00 sqm 960.00 65 providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 mm thickness of having a strength of 300 kg/sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 10.00 919.00 sqm 9190.00 66 labour charges for removing grass, thorny shrubs, jungli shrub, kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete 10.00 6.00 sqm 60.00 67 removing of old burnt submersible pump for fixing of new pump including all labour charges etc. complete nothing will be paid extra on any account . 2.00 1485.00 job 2970.00 68 repairing of old submersible pump in all respect and fixing the same as directed by engineer in charge. 1.00 4155.00 job 4155.00 69 providing fixing & erecting 2.0 hp 25 stages single phase bore well submersiable pump set of texmo make only confirming to is 8034 & motor confirming to is 9283 with waterproof winding, pump shall be suitable for various delivery head & discharge of water with stainless steel shaft. the pump shall be suitable for direct coupling with 1.00 27550.00 no 27550.00 eec/cccm/dn/jal/t-59/2025-26 page 62 of 69 61 suitable suction strainer, anti rust steam lined non return valve , submersiable copper cable incl. two pairs of erection clamps 65 mm wide 10 mm thick shall be provided with pump set & the following accessories shall be provided at the time of fixing of motor & pump( for delivery head upto 90 mt) including making connections of hdpe pipes at top and bottom, to the gi nipple of required length and size, also connecting non return valve etc. complete , making all electrical connections of pump set and panel board including providing and fixing clamps 2 nos., non return valve, bore cap, suitable pannel bord with starter testing pump set before and after installation in borewell including all labour charges, taxes, transportation, with all necessary electrical connections of pump set, , taxes, with following accessories including submission of warranty and testing report.(the execution of this item is absolutely depend on the damage report of existing submersible pump submitted by the electrician) 70 providing and lowering in bore well 40 mm diameter isi mark hdpe pipe of in bore well, including lowering in the borewell neatly with the help of tripod and chain pulley block if required ,including providing and lowering of nylon rope of sufficient thickness along with hdpe pipes as additional supporting the hdpe pipes, complete as directed by the engineer incharge with all necessary fittings( nothing will be paid extra on any account) 60.00 90.00 rmt 5400.00 71 supplying & fixing 3 core pvc sheated copper cable of 2.5 sq mm of finolex only, including fixing in position testing etc complete. 10.00 108.00 rmt 1080.00 72 supplying and erecting auto switch mug6 control panel of l&t make for above submersible pump set consisting of dol starter, ammeter, voltmeter etc complete with all eletricals connections by authorized electrical persons etc complete 1.00 5083.00 no 5083.00 73 providing and erecting statutory type chain link fencing 2400 mm. height with g.i. chain link of size 50 x 50 mm ,10 guage thick of approved quality and manufacture , and including fixing chain link with vertical m.s. angle of size 65 x 65 x 6 mm of height 3000 mm and at 3500 mm centre to centre and stay angles of 65 x 65 x6 mm at every tenth posts/corner posts/or end posts, fixed, grouted neatly in vertical position in cement concrete block of size 450 x 450 x 450 mm of cement concrete grade 1 : 3 : 6 with approved quality of metal and sand including all required form work, labours ,compaction of concrete ,curing ,including providing and fixing gi wire of 10 gauge at top and bottom and vertical m.s. bar of 10 mm diameter (plain) and of same height of 2400 mm including inserting the same bar vertically in chain link fencing so as to hold the chain link fencing in right position, vertically and fixing the chain link to the vertical angle with the help of gi j hooks of required size, washers, nuts and bolts etc complete with providing and applying oil painting of approved manufacture and make quality and manufacture and shade in two coats to m.s. angles with one coat of anti corrosive paint. all the work is to be carried out as per the drawing and upto the satisfaction of engr in chrge. ( nothing will be paid extra on any account)spec : as directed by engr in charge.. 1.00 1826.00 rmt 1826.00 74 providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on m.s. angles (50 mm x 50 mm x 6 mm) at 2.5 metres centre to centre including excavating pits for foundation, fixing posts in cement concrete of size 45 x 45 x 45 cm, fastening the wire 1.00 838.00 rmt 838.00 eec/cccm/dn/jal/t-59/2025-26 page 63 of 69 62 and painting the m.s. angles with one coat of red lead primer and two coats of painting etc. complete. 75 providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc. complete. 1.00 5878.00 cum 5878.00 76 providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc. complete. 1.00 6387.00 cum 6387.00 77 providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. 20.00 183.00 sqm 3660.00 78 transportation charges for disposing off debrise/ scrap material out side the premises upto 10km with 2 brass capacity as directed by the engineer in charge including loading & unloading , transportation etc complete 5.00 2353.00 trip 11765.00 79 cleaning of septic tank by removing all debries material from septic tank by engaging labour, tool etc as directed by engineer in charge 2.00 1792.00 job 3584.00 80 providing and laying in situ/ready mix cement concrete m- 20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand. bd.f.3 page no. 298 and b.7, page no.38 1.00 7587.00 cum 7587.00 81 providing and laying cast in situ/ready mix cement concrete m20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand, bd.f.5 page no. 300 and b.7, page. no. 38 1.00 14266.00 cum 14266.00 82 providing and laying cast in situ/ready mix cement concrete m20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand 1.00 12752.00 cum 12752.00 83 providing and laying cast in situ/ready mix cement concrete m20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, 1.00 14415.00 cum 14415.00 eec/cccm/dn/jal/t-59/2025-26 page 64 of 69 63 laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand 84 providing carpenter i class skilled with tools to carry out the carpenter work as directed by engineer in charge 2.00 677.00 no 1354.00 85 providing plumber with tools - skilled with tools to carry out the plumbing work as directed by engineer in charge 1.00 677.00 no 677.00 86 providing unskilled labour with tools like tikaw, phawada etc. all to carry out the any type of work as directed by engineer in charge 4.00 615.00 no 2460.00 87 providing and fixing texmo make 1.2 h.p. tsh2drs s/p monoblock pump including transportation, loading unloading and proper covering the monoblock with ms box of appropriate size etc. complete. nothing will be paid extra. 2.00 3865.00 no 7730.00 88 providing & fixing turbo ventilator 24 including all fitting material, labour etc. complete. as directed by engineer in charge. (nothing will be paid extra) 1.00 9344.00 sqm 9344.00 89 collection of old metal by screening, stacking screened metal, spreading the screened metal in line & level as directed bu engineer incharge with all leads and labourr with proper precaution 90 supplying stone dust, spreading and stacking the road site, including conveying and stacking complete. 1.00 1486.00 cum 1486.00 91 supplying, spreading and stacking 40mm metal at the road site, including conveying and stacking complete. 2.00 1624.00 cum 3248.00 92 supplying, spreading and stacking 20mm metal at the road site, including conveying and stacking complete. 2.00 1624.00 cum 3248.00 93 providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete 2.00 837.00 cum 1674.00 94 providing brick curing along perifery of metal spreading and white washing etc. complete including excavation and backfilling also making surface clean etc. nothing will be paid extra. 10.00 91.00 rmt 910.00 95 providing waterproof plaster in w.c. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of nahani trap and any outlet by properly) etc. complete. 5.00 530.00 sqm 2650.00 96 providing, laying and fixing p.v.c. pipe of 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. including removing existing pipe line if necessary and conveying and stacking the same in pwd chowky or as directed etc. complete. 3 431.00 rmt 1293.00 97 providing and fixing 50mm.dia.medium class g.i. pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. 3 7257.00 sqm 21771.00 98 providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding i.s. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, 3 744.00 sqm 2232.00 eec/cccm/dn/jal/t-59/2025-26 page 65 of 69 64 filling joint with cement slurry cleaning curing etc. complete. 99 providing and laying polished hand cut kotah stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 c.m. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. 5 1307.00 sqm 6535.00 100 providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing, cleaning
