Construction of Various works for development of Sahityaratna Lokshahir Annabhau Sathe M C School 03 Pimpalner At Deulgaon Raj-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Spec.No.: Bd.A.1/Page No.259 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) Spec. No.: Bd.A. 2/Page No. 259 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) Spec. No.: Bd.A. 4/Page No. 259 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No.: As directed by Engineer-in-charge. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.E. 1/Page No. 287/1.5. 456 (2000) Providing and casting in situ cement concrete of required grade of trap/ granite/quartzite /gneiss metal for R.C.C. beams and lintels as per detailed design and drawings or as directed, including steel centering, plywood/steel formwork steel props, compaction, finishing uneven and honeycombed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. Including use of plastisizer wherever necessary as directed by Engineer-In-charge (Excluding reinforcement, including cover block). The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) Spec.No.: Bd.F.6/Page No.300/1.5. 456 (2000) GF Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Spec. No.: Bd.F.9/Page No.303/I.S. 456 (2000) GF Providing and casting in situ cement concrete of required grade of trap / granite/quartzite /gneiss metal for R.C.C slabs and landings as per detailed design and drawings including steel centering, plywood/steel formwork, steel props, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fan hook box of 2 mm thick M.S.Sheet rectangular size 180 mm x 100 mm with required depth, with holes or notches, as required, bottom and top lids of 1.6 mm thick M.S.Sheet [Spec.No. :Bd.F.8 Page No. 302/IS:456(2000)] GF -/Providing and fixing in position reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. Spec. No.: Bd. F.17/Page No.306 GF 5/ Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No.: Bd.A. 10/Page No. 262 Avallable Providing and laying Cast in situ/Ready Mix cement concrete M 15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ stee formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface anc curing etc. complete. The Cement Mortar 1:3 plaster considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag plastic, tarpaulin etc. (Wooden centering will not be allowed.) Spec. No.: Bd.E. 3/Page No. 288/I.S. 456 (2000) GF Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 im foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints om unexposed faces, raking out joints on exposed faces and watering etc. Complete. Spec.No.: Bd.G.1/Page No.313 GF Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in super structure including striking joints, racking out joints wateringand scaffolding complete. Spec. No.: Bd.G.5/Page No.315 GF Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in halft brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter/2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Spec.No.: Bd.G.7/Page No.316 Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B.Masonry and concrete members complete. Spec. No.: Bd.L.2/Page No.368 GF Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spec. No.: Bd.L.1/Page No.368 GF Providing and applying putty to new plastered surfaces in two coats to receive approved paint in all positions including all materials, labour scaffolding and curing etc. complete. [Spec. No.: As directed by Engineer incharge.] GF Providing and applying primer coat for wall surface to receive oil bound distemper treatment. [Spec.No.: As directed by Engineer incharge.] GF Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. Bd.P.6 Page One Number 414 Providing sand faced plaster for external portion in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15 mm. Thick in C.M. 1:4 using water proofing compound at 1 kg per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains, making grooves and curing for fourteen days scaffolding etc. complete. [Spec.No. :Bd.L.7 Page No. 369] GF /Providing and applying two coat of Polymer based external weatherproof paint of standard manufacture like Apexfrom Asian paints, Excel from Nerolac paints ofapproved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. for specified buildings complete.(including primer coat)(Prior specific permission of S.E. shall be obtained before inclusion of this item in the estimate.) Spec.No.: As directed by Engineer-in-charge. GF 9/ Providing and fixing Z-type (Staggered) steel ventilator fully glazed with Z-section of 10 gaugeand MS mesh of 12 gauge (opening 25 x 25) as per detailed drawing with outer frame of Z-section including two 12 mm square bar in each panel fabricating,glazing with 6 mm thick wire glass and of approved type and quality and fasteningand oil painting two coats etc. complete. [Spec.No.: As directed by Engineer-in-charge.]I Spec. No.: As directed by Engineer-in-charge GF / Providing and laying telephone black/ Amba White/ Cadbury brown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. As directed by Engineer-In-Charge 9/ a) Providing and fixing factory made soild core flush door 35 5 mm thick (1.5.22021962 Revised 1966) in single leaf 35mm thick with glazed ventilator commercial type of exterior of seasoned wood frame 60mm x 100mm with approved commercial ply wood facing wrought iron hold fast Aluminium fixtures and fastening and handles on both sides finishing with. oil painting 3 coats etc. complete. (Sample to be got approved from Ex.Engineer before use) GF Spec.No: As directed by Engineer-in-charge etc
