|
| 1 | Item No.1)Removing cement tiles, or marble or polishedshahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. completeI.NO.46.19 |
| 2 | Item No.2)Providing and laying Cast in situ cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer. With crushed Sand SSR I.No. 24.01 |
| 3 | Item No.3).Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of1:4cementmortarincludingneatcementfloat,fillingjoints,curingandclearing etc.complete.I.NO.33.40 |
| 4 | Item No.4)Providing and laying damp proof course 50 mm thick in M20 cement concrete layer andbitumen / using cement with waterproofing compound curing, formwork etc. complete..I.NO.31.01 |
| 5 | Item 5.Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testin |
| 6 | Item No. 6Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness ofhaving a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to30 mm thick including skirting joints and cleaning etc. complete..I.NO.33.54 |
| 7 | Item No. 7Medium Height Steel Storage @ 750Lx450Dx1200HTProviding and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustableshelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storagein powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing..NO.51.36 |
| 8 | Item No 8.Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.I.NO.36.13 |
| 9 | Item No 9.Providingand applyingtwocoatsof exterioracraylicemulsion paintconfirmingto corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces includingcleaning,preparingtheplastersurface,applyingprimercoat,scaffoldingif necessary , and watering the surface for two days etc complete.I.NO.35.25 |
| 10 | Item No.10)Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge SSR I.No. 6.36 |
| 11 | Add For Royalty |
| 12 | Add ForTesting |
| 13 | Add For Insurance |
| 14 | Add For GST |
