Tender For Misc Maintenance / Repair Of Building Wk At 2 Bhairav Bn Raj Rif At B/R Ii Under Ge Nasirabad; 1 Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed 2 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 3 Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. 4 Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. 5 Taking down chowkhat or frames with shutter (withouttaking off shutter from the frame ) area exc 1.5 Sqm but n. exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. 6 Taking down chowkhat or frames with shutter (withouttaking off shutter from the frame ) area n.exc 1.5 Sqmeach complete with hold fasts etc complete all as specified and directed. 7 Taking down shutters of any descriptionexc 1.0sqm and n. exc 2.00sqm each shutter complete all as specified and directed. 8 Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. 9 M&L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed. 10 M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. 11 M&L 5mm thick rendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed. 12 M&L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compoundon other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed (WPC measured and paid separately) 13 Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcementand provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. 14 M&L for rough cast plaster over 15mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. 15 M&L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. 16 M&L non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. 17 M&L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size exceeding 0.11 Sqm but not excceding 0.18 Sqmset and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. 18 M&L for vitrified ceramic tiles light shade10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. 19 M&L for vitrified ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. 20 M&L for machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed. 21 M&L for machine cut kota sotne slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed. 22 M&L for mirror polishing on existinggranite/Kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. 23 M&L for precast cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in cover slabs, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. 24 M&L for TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending, spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. 25 M&L for18 to 20mm thick granite ( of any type ) work (table rubbed and polished ) in steps, jambs, pillars, window -cills, cooking platforms and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite includinglaid over 15mm thick screed bed in CM (1:6) including rounding to edges of stone slab complete all as specified and directed. 26 S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both sideand both facesis covered with approved pattern with Decorative colouredlaminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed. 27 S&F Iind class HW, Hollow, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. 28 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. 29 S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161of SSR (Part -II ) 2020 complete all as specified and directed. 30 S&F mild steel framed work such as grills, grating cooler stands, Tank Stage, roof purling, etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. 31 Taking down old u/s steel window / ventilator andS & F Steel window/ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1, and plaster with finishes to match the existing surfaces, including synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items. 32 Dismantlingboards (wooden, fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed. 33 S & F in 18/19mm thick MDFboard one side laminateddecorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed. 34 S&F in continous (Piano) hinges, mild steel, bright finish, width of flaps (when open) 30mm complete all as specified and directed. 35 S&F in repairs Stainless steel butt hinges, ISI marked of size 100mm, complete all as specified and directed. 36 S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. 37 S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 38 S&F 300mm long alumimium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy all as specified and directed. 39 S&F in repairs 25mm dia mild steel chromium plated curtain rod and decorative type knobs and curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed. 40 Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. 41 Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. 42 S&F 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. 43 S&F 20mm GI water tubing, medium grade, galvanised with all fittings ( and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. 44 Refixing old 15mm GI tubing (Concealed type) galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. 45 Refixing old 20mm GI tubing galvanised with new fittings and fixed to walls, ceiling or laid in floors, trenches including necessary cleaning, cutting, screwing complete all as specified and directed. 46 S&F in repair tubular towel rail brass chromium plated20mm dia D type 60cm long between flanges complete all as sped & directed. (Make: Prayag/Prima/Sakti) 47 Supply and fixing in repair CP brass shower rose (4 overhead ABS) with 225mm CP brass arm and flange complete all as specified and directed. (Make: Prayag/Prima/Sakti) 48 S&F in repair mirror of size 600 x 450 x 5.5 mm bevelled edge of selected quality PVC / aluminium moulded frames and back with fixing arrangement to wall complete all as specified and directed.(Make: Prayag/Prima/Sakti) 49 S&F in repair PVC valve less, syphonic action type flushing cistern, 10 Litre capacity, low level, white with inlet, ball vlave float, handle including PVC rigid pipe 32mm bore as flush pipe fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed. 50 S&F in repair wash hand basins vitreous china, coloured flat back size 450 x 300mm fixed including bracket, waste pipe and waste coupling complete all as specified and directed. 51 S&F in repair PVC connection, heavy duty 15mm bore, 60cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. 52 S&F in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified. 53 S&F in repair pillar tap, cast copper alloy chromium plated screwed down high, pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe complete all as specified and directed. 54 S&F in repairs 15mm bore cast copper alloy chromium plated bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed. 55 S&F in repair angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. 56 S&F in repair 15mm bore stop valves (concealed), chromium platedcast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed 57 Taking out old u/s water closet and S&F vitreous China Orissa pattern size 580 x 440mm white, with intergral foot rests with vitreous china P or S trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed. 58 Supply and Fixing in repairs vitreous china wash downwater closetpedestal pattern pan whitewithtrap including seat cover and connection to existing out joint pipe, flushing pipeor Cistern, antisyphonage pipe, including making, floor etc complete all as specified and as directed. 59 S&F in repairs vitreous china urnials half stall type including connecting pipe, spreader, flushing valve and flush/waste pipe fixed to wall complete all as specified and directed. 60 Supply and fixing in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed. (Make : Prayag or eqvt). (Cat No. 555) 61 S&F in repair 32mm dia PTMTwaste pipe suitable for WHBorSinksetc complete all as specified and directed. 62 Taking down 100mm / 75mm dia AC/PVC/CI pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories) 63 S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. 64 S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / newMS stack clamps ofFI 50 x 3mm complete all as specified and directed. 65 S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. 66 S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed. 67 S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door complete all as specified and directed. 68 S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door complete all as specified and directed. 69 S&F in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. 70 S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted. 71 M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate ) as in floors / pavings complete all as specified and directed. 72 M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment coloured, reflective type of approved quality laid over & Including 25mm thick sand cusion vibrated with mechanical vibratorcomplete all as specified and directed. 73 M & L for providing precast cement concrete 1:3:6 Type c1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position & set in CM (1:4) incl necessary excavation required & removal of spoil to a distance exc 50 m complete all as specified and as directed. 74 M & L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor/path with grey cement and no pigmentlaid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. 75 M&L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. 76 Hacking out old broken glass (any size, quality or description) from metal frames, glazing with putting or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.m in each pane complete all as specified and directed. 77 All as per srl item No 76.00 here in before but 3 mm thick figured glass panes complete all as specified and directed. 78 S&F 3mm thick glass, ordinary quality, 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane complete all as specified and directed. 79 S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed tinned or stainless steel wire staple complete all as specified and directed. 80 M&L for preparation of newsteel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed. 81 M&L for prepartion of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 82 M&L for preparation of newly plastered surface of wall and applyingtwo coats of oil bound distemper over a coat ofprimer over 1mm thick wall putty complete all as specified and directed. 83 M&L for preparation of new plastered surfaces of ceiling and applying three coats ofwhite wash complete all as specified and directed 84 M&L for newly plastered surfaces of wall / Jalli and two coats of cement base paint over one coat of cement based primer on plastered/ concrete surfaces of walls including preparationof surfaces complete all as specified and directed. 85 M & L for newly rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emulsion paint over a coat ofprimer complete all as specified and directed. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) 86 M & L for complete removal of existing treatment of old plastered surfaces ofwall and applying two coats of oil bound distemper over & including 1mm thick wall care white putty(JK/Birla)complete all as specified and directed. 87 Dismantling wall and ceiling boards (fiber, Gypsum,wooden board, insulation etc.) any thickness, including cover fillets, Suply & Fixingfalse ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross T of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main T at 600 mm c/c to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm Cont... Item No 87.01 88 and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm complete all as specified and as directed. 89 S & F in repairs 5-8mm thick PVC wall cladding hollow cored and a tongue and grooved edge fixed with screw incl required PVC cleat at edges and at corner complete all as per manufacturer instruction and directed. 90 M & L for precast cement concrete (1:2:4) type B-0 using 12.50mm graded aggregate, Jalli 35mm thick including all mouldings set in CM (1:4) complete all as specified and directed. 91 S&F in repairrotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top), Triple layer,hoisted and fixed in position complete all as specified and directed. 92 S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 grams) complete all as specified and directed. 93 Demolition of cement concrete of any description from sunken floor (ground or Ist floor) and removing and depositing materials exc 50 mtrs depositing level n exc. 1.5 m aove the starting pointcomplete all as specified and directed. 94 M&L for mass concrete filling using PCC (1:5:10) type E2 in sunken floor complete allas specified and directed. 95 M&Lfor 20mm thick cement plaster in CM 1:4 mixed with water proofing compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composit compound as specified and approved & cement slurry two layers, Ist layer @ 0.488 Kg/Sqm mixed with composit compound @ 0.253 Kg/Sqm & the second layer slurry @ 0.242 kg/Sqm mixed 0.126 Kg of compound complete with min 4 hours allowed to air cure between these layers and applying 200 u polyfilm with adhesive complete all as specified and directed. 96 S&F in repair stainless steel sinks with draining board made of 1mm thick sheet with over all size 915mm x 460mmand bowl size 410mmx330x160mm for kitchen or laboratory with pluge washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe complete all as specified and directed. 97 Supply and fixing in repairs stainless steel plate rack ofsize 914 x 609 mm or equivalent in jayna/Nirali as approved by GE complete all as specified and directed. 98 S & F in repairs Roof tiles, Mangalore pattern, interlocking at side joints, laid dry, complete all as specified and directed. 99 Dismantling corrugated / semi corrugated Asbestos cement sheets in roof covering of any thickness complete all as specified & directed. 100 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface all as specified and directed. 101 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors/ windows/ventilators frame(Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws all complete as specified and directed. 102 Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, rolling channel with bearing etc. complete all as specified and directed. 103 S&F in repairs 5.5mm thick sheet glass ordinary quality and glazing in square complete all as specified and directed. 104 S & F 100 mm Mortice lock Mild steel 4 lever , vertical type complete all as specified and directed. 105 S&F in repair Deco door seal size 1.5 widthdoor bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed. 106 S & F in repairs chromium plated Peg Set 6 (Zinc)fixed on wall complete all as specified and directed. (Make, Prayag, Cat No BEA-30) 107 Total in Figures 108 Quoted Amount in Words 1.00 Old U/s Chowkhat with shutter exc 1.5 but n. exc 4.00 Sqm with all fittings. Each 15.00 357.00 5355.00 2.00 Old U/s Chowkhat with shutter n.exc 1.5 Sqm with all fittings. Each 7.00 315.00 2205.00 3.00 Old U/s wooden shutter exc 1 sqm but n.exc 2.00 Sqm with all fittings. Each 5.00 220.00 1100.00 4.00 Old & U/s brick and stone masonary Cum 4.00 325.00 1300.00 5.00 Old U/s steel window/ventilator incl guard bars/GI wire cloth with all fittings. Sqm 30.00 450.00 13500.00 6.00 Old & US wooden board of any description. Sqm 25.00 95.00 2375.00 7.00 Old & U/s curtain rod and brackets of any description. RM 175.00 15.00 2625.00 8.00 Old U/s GI tubing 15mm bore of any description. RM 30.00 27.00 810.00 9.00 Old U/s GI tubing 20mm bore of any description. RM 20.00 32.00 640.00 10.00 Old & U/s tubular towel rail of any description. Each 20.00 25.00 500.00 11.00 Old & U/s shower rose of any description. Each 20.00 22.00 440.00 12.00 Old & U/s Mirror of any description. Each 20.00 37.00 740.00 13.00 Old & U/s PVC flushing cistern of any description. Each 20.00 55.00 1100.00 14.00 Old & U/s water closet/Wash Hand Basin of any description Each 8.00 55.00 440.00 15.00 Old & U/s PVC connection of any description. Each 36.00 22.00 792.00 16.00 Old & U/s Pillar cock of any description. Each 10.00 55.00 550.00 17.00 Old & U/s bib tap / stop valve / angle valve/ gate valves/WHB mixture of 15mm/20mm/25mm bore of any description. Each 133.00 32.00 4256.00 18.00 Old & U/s iron scrap of any description. Kg 1000.00 30.00 30000.00 19.00 Old & U/s PVC Cabinet mirror of any description. Each 8.00 110.00 880.00 20.00 Old &US waste pipe of any description. Each 10.00 5.00 50.00 21.00 Old & U/s PVC (SWR) junction (Single T) / bend / shoe /vent cowl/ reducers of 110/75mm bore of any description. Each 14.00 25.00 350.00 22.00 Old & U/s floor trap with grating of any description. Each 10.00 40.00 400.00 23.00 Old & U/s False ceiling wooden/gypsum board. Sqm 100.00 45.00 4500.00 24.00 Old & U/s RCC Jalli of any description. Sqm 50.00 25.00 1250.00 25.00 Old & US PVC Water tank 1000 Ltr capacity of any description. Each 12.00 500.00 6000.00 26.00 Old & US 20mm PVC ball valve of any description. Each 12.00 25.00 300.00 27.00 Old & US steel kitchen sink of any description. Each 2.00 520.00 1040.00 28.00 Old &US plate rack of any description Each 2.00 55.00 110.00 29.00 Old & US steel Peg set of any description. Each 23.00 10.00 230.00 30.00 Old &US mangalore tiles of any description Sqm 150.00 20.00 3000.00 31.00 Old &US AC sheet of any description Sqm 100.00 20.00 2000.00 32.00 Old &US Door Seal of any description RM 35.00 2.00 70.00
