|
| 1 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 15mm thick in CM 1:4on brick masonary of brick work surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick in CM 1:3 on concrete surface of ceiling, chajja etc, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 6 | M&L forpreparing new plastered surface of walland appying two coat of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brushcomplete all as specified & as directed by Engineer-in-Charge. |
| 7 | M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. |
| 8 | M&L for plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof projections etc, making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 9 | M & Lfor applying two coats of 100% premium acrylic emulsion paintand having VOC less than 50 gm/ltr and UV resistance,Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/ 10Sqm over and including priming coatof exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces, complete all as specified and directed. |
| 10 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed. |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 12 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 13 | S&Fpressed steel frames for doors/windows of size 125x60mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed. |
| 14 | S&F pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet)with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed. |
| 15 | S&F 35mm thick factory made 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass or gauge etc (divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain chamfered or rounded, fitted with cut and mitered beads and fitted to chowkats for securing glass/gauge. Size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I Incl two coats of synthetic enamel paint over a coat of pink primercomplete all as specified & directed. |
| 16 | S&F 35mm thick factory made plain framed panelled shutters of 2nd class hard wood two panel with lock rail and panel of 9mm thick BWP commercial ply.The size of rail and stile as per IS-1003 (Part-I) Kiln seasoned and chemically pressure treated factory made shutters wood is to be incorporated Incl two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 17 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50x100 mm (double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length completeall as specified and directed.Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steelhinges and necessary S.S screws shall be paid separately) |
| 19 | S&F factory made solid decorative flush door shuter 30mm thick with integral skin as frames & 5mm thick PVC sheet high pressure compact laminate on both side of approved colours in fill sandwich with 20mm thick PVC solid board with C type GI or 40x20x19 of MS pipes stiffner & filling in frame at site complete all as specified and diercted. |
| 20 | S&F solid PVC door frame of size 50 x 90 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification complete all as specified and directed |
| 21 | S & F 100 mm stailess steelhinges,complete all as specified and directed. |
| 22 | S&F for aluminiumanodized barrel tower bolts 150 mm of extruded section and fixed. |
| 23 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI markedall as specified. |
| 24 | S&F 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 25 | S&F 300 mmMS Rat tail door spring for door closer, complete all as specified and directed |
| 26 | S&F in repairs Box type Steel windows and ventilators comprised of tubular frameand shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg staydovetailedor welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate)& two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 27 | S&F in repair Steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 28 | S&F 5.50mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares exc 0.5 Sqm in each pane complete all as specified and directed. |
| 29 | False ceiling of 7 mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm of manufacturer M/s Saint Gobain or equivalent of Armstong/Everest including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed.. |
| 30 | Hacking out old broken glass ( any thickness , size, quality, or description) from wooden frame glazed with putty or fixed with beads complete all as specified and directed. |
| 31 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane all as specified and directed. |
| 32 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed. |
| 33 | S&F in repair stainless steel wire cloth 0.36 mmnominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples omplete all as specified and directed . |
| 34 | Dismantling floor, hearth or wall tilling and terrazo topping incl cement mortar bedding ( but not backing) removing serviceable tiles to stores and rubish off the premises omplete all as specified and directed . |
| 35 | M&L glazed ceramic coloured tiles in vertical surface 600x300x7mm thick set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster in CM 1:4complete all as specified and directed. |
| 36 | M&L for vitrified tiles 8 mm thick ( Square or rectangular) polished, double charged area of each tile not exceeding 0.36 sqmin floors and skirting etc set and jointed (joint free)in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) all as spd and directed. |
| 37 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqmbut not exceeding 0.36 sqmin floors etc set and jointed(joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:6) complete all as specified and directed . |
| 38 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqmbut not exceeding 0.11 sqmin floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement 15mm thick screed bed in CM (1:4) complete allas spd & directed. |
| 39 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed. |
| 40 | Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed. |
| 41 | S&F15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 42 | Fixing only the 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified. |
| 43 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified. |
| 44 | Fixing only the 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces to walls, floor, ceiling etc all as specified. |
| 45 | Ball valve high pressureof PTMT with epoxy coated alum rod & high density plastic ball screwed for 20mm bore iron pipe and fixed (minimum weight 20mm -210 gms) fixed in reapirs complete all as specified and directed. |
| 46 | S&F in repairBib taps cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore complete all as specified and directed. |
| 47 | S&F in repair angle valve / stop valve cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore. |
| 48 | S&F in repair concealed type angle valve / stop valve cast copper chromium plated fancy type alloy with long shank and cup ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15mm bore. |
| 49 | S&F in repair 20mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixedcomplete all as specified and directed |
| 50 | S & Fin repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting standand 32 mm diawaste pipe complete all as specified and directed |
| 51 | S & F in repair pillar tap 15 mm bore chromium plated screwed down, high pressure screwed for iron pipe complete all specified and directed . |
| 52 | S & F in repair PVC waste pipe 32 mm dia for wash hand basin and urinal complete all as specified and directed |
| 53 | S & F in repair PVC connection 15 mm size with PTMT nuts or length 450 mm. |
| 54 | S&Fin repair stainless steel grating 100 mm dia of(Minimium weight 25gms)complete all as spd & directed . |
| 55 | S&F in repairPVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 56 | Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof),including making connections to trap, and to flush pipe incl plastec seat and cover ( As directed ) with stainless steel or aluminised hinging device and fixed in repair complete all as specified and directed. |
| 57 | Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thick (below or above ground level)complete all as specified and directed. |
| 58 | M&L for 75mm thick PCC 1:4:8 typeD-2 (using 40mm graded crushedstone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 59 | M&L for 60mm thickness M-35 grade Machine pressed precast concrete factory madepaver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) of approved colour and shade complete all as specified & directed. |
| 60 | M&L for Sand filling under floors / sand cushining , complete all as specified and directed. |
| 61 | M&L for 25mm thick Chequered cement concrete coloured finished tiles area not exc 0.18 sqm each, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed. |
| 62 | M&L for Providing precast cement concrete, Type B1, 1:2:4 (20mm graded crushed stone aggregate) solid building blocks, kerb stone or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4complete all as specified and directed. |
| 63 | S&F PVC (SWR) 75mm bore junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 64 | Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weightcomplete all as specified and directed. |
| 65 | S&F in repairs 600 x 900 mm bevelled edge mirror of selected quality glass 5mm thick polished mounted on 6mm thick PVC Laminated sheetfixed to wallsin repaircomplete all as specified and directed. |
| 66 | S&F in repairs 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 67 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 68 | M&L Marble work 12mm to 15mm thick (table rubbed and polished) in cooking plateform,window cill, steps etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra,complete all as specified and directed. |
| 69 | M&L for 15-16mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in cement mortar in CM 1:4 complete all as specified and directed. |
| 70 | Dismantling water tank of capacity exceeding 250 litres but not exceeding500 litres and removing to stores, complete all as specified and directed. |
| 71 | Dismantling water tank of capacity exceeding 501litres but not exceeding 1000 litres and removing to stores, complete all as specified and directed . |
| 72 | S&F Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including all accessories, all as specified . |
| 73 | S&F Rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including all accessories, all as specified . |
| 74 | S&F 20mm bore Ball brass valves, high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, all as specified and directed. |
| 75 | Supply only liquid water proofing compound |
| 76 | M&LPCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement, including demolition, complete all as specified and directed. |
| 77 | M & L forcement concrete (1:2:4) type \" B1 \" ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection ), complete all as specified and directed. |
| 78 | M & L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (WPC measured separetaly), complete all as specified and directed. |
| 79 | Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. |
| 80 | Note for item No 79 :-(a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface.(b) Conduct ponding test after 7 days, continnue curing of 14 days.(c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be includedthis fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted.(f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material. |
| 81 | Taking down eaves gutters and rainwater pipesany dia (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc.complete all as specified and directed. |
| 82 | S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length fixed to walls with and including clamps complete all as specified and directed. |
| 83 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and directed. |
| 84 | S&F in repair 110 mm PVC(SWR) reducer complete all as specified and diretced. |
| 85 | S&F in repair 110mm dia PVC (SWR) bends any radius(larger bore measured) |
| 86 | S&F in repair 75 mm dia PVC (SWR) bends any radius(larger bore measured) |
| 87 | S&F in repair PVC (SWR) 75 mm diavent cowl all as directed by Engr-in-charge. |
| 88 | S&F in PVC floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified. |
| 89 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed |
| 90 | TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed |
| 91 | TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia all as specified and directed. |
| 92 | M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 93 | S&F in repair sinks with drainage board made of stainless steel 1mm thickkitchen with plugs, washers , PVC waste pipefixed in repair including waste copling; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915x460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed. |
| 94 | Taking down shutters of any description n exc 1 Sqm each, complete all as specified and directed. |
| 95 | S&F in repair vitreous china, squatting from Pan \"Orissa\" pattern \"white\" size 580mm x 440mm white with integral footrest including provisionof lean concrete bedding connection to drain out pipe and to flush pipe and to flush pipe anti syphonage pipe etc complete including making good to floor where required all as specified. |
| 96 | S&F in repair towel rail CP 600 mm long complete all as specified and directed. |
| 97 | S&F in repair over head shower 125mm size for 15mm bore pipe, cast copper alloychromium plated fixed in repairscomplete all as spd and directed. |
| 98 | Dismantlingof plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed by Engr-in-charge. |
| 99 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. ( zinc coating 275) complete all as spd and directed. |
| 100 | S&F Plain, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as spd and as drected by Engr-in-Charge |
| 101 | S & Fin repair stainless steelCurtain rails of 25 mm bore with bracket ,end bulbs, fancy type, fixed in position as approved by Engr-in-Charge |
| 102 | S&F in repair Vitreous china wash downwall hungone piece water closet pan (pedestal pattern), white, complete including fixing to trap, PVC seat cover for pedestal pan complete all as specified and as directed. |
| 103 | M&L providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions), with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 433 and IS : 1285, fixing with dash tasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling C.P. brass/ stainless steel screws, all as specified and directed. |
| 104 | M&L powder coated aluminium grill of approved design/ pattern, with approved standard section, fixed to existing window frame with C.P. brass/ stainless steel screws @200mm centre to centre, including cutting grill to proper opening size for fixing and operation of handles, fixing of approved standard section around the opening as per requirement complete all as specified and directed. |
| 105 | S&F powder coated aluminium door shutters, aluminium section weighing not less than 0.55 Kg/ m including necessary joints cleats, glazing clips, rubber neoprene packing, 200mm size handles 2 Nos in each door, 03-SS higes, powder coated aluminium snap beading fixed with screws complete all as specified and directed. |
| 106 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws complete all as specified and dierected. |
| 107 | S&F in repair health foucet hand shower 8mm dia 1m long flexible hook and wall hook complete all as specified and directed. |
| 108 | S&F in repairstainlesssteelshelf assembly , shelf 12cm wide with SS chromium plated brackets double guard and railing 60cm long, complete all as specified and directed |
| 109 | S&F in repair stainless steel cornershelevesassemblySize not less then 300x300x70mm with chromium plated brackets double guard and railingcomplete all as specified and directed |
| 110 | S&F in repairs Stainless Steel toilet paper holder (as per sample) with lid & flash recessed typeFitting with S S screws complete all as directed |
| 111 | S&F18mm thick HDHMR (high density high moisture resistance)one side colour another side white board as in kitchen canbinat, bed room cup board ward robe and like fixed with suitable nails incl fixed with suitable edging lape screws to steel/wooden frame complete all as specified and directed. |
| 112 | All as per Srl item No 110 but both side white board without printed. |
| 113 | S&F Continuous (piano) hinges, 30mm width of flaps (when open) mild steel, bright finish or electrogalvanised (as per sample) complete all as specified and directed. |
| 114 | S&F 100 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 115 | S&F 75mm hasp and staples, safety type of aluminium anodised(as per sample) with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 116 | S&F in repairs aluminiumanodized barrel tower bolts 150 mm of extruded section (as per sample) fixed complete all as specified and directed. |
| 117 | S&Fin repairs 150 mm size aluminium alloy handles, febricated type extruded section(as per sample), complete all as specified and directed. |
| 118 | S&F in repairs for 300 mm long aluminium alloy, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed |
| 119 | S&F5mm thick HDHMR (high density high moisture resistance) board as in kitchen canbinat, bed room cup board ward robe and like fixed with suitable nails incl fixed with suitable edging lape screws to steel/wooden frame complete all as specified and directed. |
| 120 | S& F in repair 100mm size stainless steel brignt finish handle as approved by GE, fixed with Nut and bolt complete all as specified. |
| 121 | S&F Stainless steel cabinet hinges soft close clip on 3D, 4 hole full overlay suitable for 14-20mm thick pannelled 105 degree opening completeall as specified and directed |
| 122 | S&F in repair Magnetic catcher for shutter of approved pattern fitted with suitable screws complete all as specified and directed. |
| 123 | S&F in repair for of Brass CP suitable for centre hole basis mixer for mixing hot & cold water screwed down for15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 124 | S&F in repairs plastic water closet seat cover, closed pattern with flat bottom and cover (as per sample) and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 125 | S&F in repairs of brass spindle for bid tap/ stop cock/ pillar cook as approved, complete all as specified and directed. |
| 126 | Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 127 | M&L for Brick work with fly ash bricks (Old Size bricks), sub class\"B\" bricksstraight or curved on plan to any radius as in half brick thick walls, built in CM 1:4 complete all as specified & directed. |
| 128 | M&L for Brick work with fly ash bricks (Old Size bricks), sub class\"B\" bricksstraight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified & directed. |
| 129 | M & L Plain cement concrete 1:5:10 type E2 using 40mm graded crushedstone aggregate as in sunken floors portion including demolition of PCC & removal of rubbish complete all as specified and directed. |
| 130 | M&L 10 mm thick cement plaster in cement mortar 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 131 | S&F in repair stainless steel kitchen plate rack of size 750 x 900 mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw complete all as specified and directed. |
| 132 | S&F in repairs CP soap dish to walls with chromium plated brass screws complete all as specified and directed. |
| 133 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor Overall length of cover plate 140mm, fixed in floor complete all as specified & directed. |
| 134 | S&F in repairfor wall mixer with over headBrass chromium plated telescopic shower rose 125mm size Brass CP mixer for mixing hot & cold water screwed down for iron pipe of size 15 mm bore pipewith or without swivel joints, any size, including fixing to steel pipe or union. |
