Tender For Annual Contract For Light Roofing Works In Kmml 2025-2026 - chipping plastering 2 Dismantling old/weak plaster over masonry or skirting, raking out joints and cleaning the surface for plaster including scaffolding upto 8mtr height,tools and takles and disposal of rubbish to the dumping ground within 1kms lead,at all heights 3 demolishing rcc 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Fixing steel 6 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make including scaffolding upto 4 m height but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.Upto and including 12mm dia. 7 Steel work for pedestel 8 Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete .Thermo - Mechanically Treated bars of gradeFe-500D or more (TMT steel bars shall be supplied by company) 9 Centering & amp;amp,amp; Shuttering 10 Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete 11 RCC for pedestal 12 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of shuttering,finishing,reinforcement and cement. 13 GI tube for truss work 14 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting,fixing in position and applying a priming coatof approved epoxy primer and 2 or more coats of epoxy paint, including welding andbolted with special shaped washers etc. complete 15 Laying departmentally supplied sheets 16 Fixing FRP/poly carbonate/PVC/metallic sheets upto any pitch in horizontal/vertical / curved surfaces and fixing with polymer coated J, or L hooks, bolts andnuts 8mm dia. G.I. plain and bitumen washers or sheets shall be fixed using selfdrilling / self tapping screw of size (5.5X55mm) with EPDM seal complete , butexcluding the cost of purlins, rafters, trusses, and including cutting to size and shapeswhere ever required. etc. complete (excluding cost of sheet, purlins, rafters andtrusses.The required sheet and fixtures shall be supplied by the company), includingshifting, lifting,cutting sheets to size and shape wherever required,all tools,tackles,labours, scaffolding etc. For level from 10mtr to 20mtr. 17 Fixing FRP/ poly carbonate/ PVC/ metallic sheets up to any place in horizontal/vertical/ curved surfaces and fixing with polymer coated J, or L hooks, bolts and nuts8mm dia. G.I. plain and bitumen washers or sheets shall be fixed using self drilling/self tapping screw of size (5.5x55mm) with EPDM seal complete, but excluding thecost of purlins, rafters, trusses, and including cutting to size and shapes where everrequired. etc. complete (excluding cost of sheet, purlins, rafters and trusses. Therequired sheet and fixtures shall be supplied by the company), including shifting,lifting, cutting sheets to size and shape wherever required, all tools, tackles, labours,scaffolding etc. For level up to 10m from GL 18 Supplying and laying galvalume sheets 19 Providing,fixing profiled colour coated galvalume sheet 0.50mm TCT 550Mpa for sheets upto any pitch in horizontal /vertical/curved surfaces over truss and eaves of same gauge so as to prevent water entry into the building with necessary zinc phosphate polycoated J or L bolt of suitable length washer,nut,cap as recommended by the manufacturer,minimum end lap shall be 150mm.The lap shall be sealed with recommended sealant.Including transportation,labour,tools,materials,equipments,scaffolding,supervision,as directed by the engineer in charge at all levels.(colour and materials subjected sample approval).Polycarbonate sheet of mismatching thickness,profile,colour should be provided at suitable intervals to enter day light as directed by engineer in charge and which shall be paid separately.The payment shall be made for area of roofing sheet complete upto any pitch in horizontal/vertical or curved surfaces,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required 20 Supplying and laying PVC sheets 21 Providing & fixing PVC corrugated roofing sheets (thickness 2mm or above )ofgood quality up to any pitch,including ridges,fixing with zinc phosphate poly coatedhooks,bolts & nuts 8mm dia G.I plain/bitumen washers complete but excluding the cost of purlins,rafters,trusses etc.The sheets shall be opaque or translucent,clear or pigmented,textured or smooth as specified 22 Supplying and fixing UPVC rainwater gutter (Euro guard, Aquastar orSupreme) with metallic bracket supports as per manufactures specification 23 Providing and fixing UPVC rain water gutter of approved brand and shape, 160mmsize with required slope using self drilling/ self tapping screws complete, fixed withgi clamp at 1m spacing 24 PVC Downpipes of approved brand 25 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 mspacing. This includes jointing of pipes with one step PVC solvent cement and testingof joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 -External work - Exposed on wall 26 Scaffolding 27 Providing and fixing double scaffolding system (cup lock type) on the exterior side,upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre,horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tubechallies, M.S. clamps and M.S. staricase system in the scaffolding for workingplatform etc. and maintaining it in a serviceable condition for the required duration asapproved and removing it there after. The scaffolding system shall be stiffened withbracings, runners, connection with the building etc wherever required for inspectionof work at required location with essential safety features for the workmen etc.complete as per directions and approval of Engineer- in Charge. The elevational areaof the scaffolding shall be measured for payment purpose. The payment will be madeonce irrespective of duration of scaffolding. Note:- This item to be used formaintenance work judicially, necessary deduction for scaffolding in the existing itemto be done . 28 Epoxy bonding 29 Providing,mixing and applying bonding coat of approved adhesive on chipped portionof RCC as per specification and direction of Engineer-in-charge complete in allrespect. Epoxy bonding adhesive having coverage 2.20.sqm/Kg of approved make 30 Laying ridges for department supplied sheets 31 Fixing FRP/poly carbonate/PVC /metallic sheets upto any pitch in horizontal/vertical / curved surfaces and fixing with polymer coated J, or L hooks, bolts andnuts 8mm dia. G.I. plain and bitumen washers or sheets shall be fixed using selfdrilling / self tapping screw of size (5.5X55mm) with EPDM seal complete , butexcluding the cost of purlins, rafters, trusses, and including cutting to size and shapeswhere ever required. etc. complete (excluding cost of sheet, purlins, rafters andtrusses.The required sheet and fixtures shall be supplied by the company), includingshifting, lifting,cutting sheets to size and shape wherever required,all tools,tackles,labours, scaffolding etc. For level upto 10m from GL 32 Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).12 mm average thickness. 33 Door elbow 110mm 34 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110 mm dia Door Elbow (45 or 90) 35 PVC bend 110mm 36 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes,including jointing with PVC solvent cement-110 mm dia Bend (45 or 90) 37 PVC Coupling 38 Providing and fixing PVC moulded fittings/accessories for Rigid PVCpipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 39 UPVC end d rop 160mm 40 Providing and fixing UPVC end d rop for rain water gutter of approved brand, sizeand shape fixed with necessary screws and sealant 41 UPVC Center d rop 160mm 42 Providing and fixing UPVC center d rop for downpipes for rain water gutter ofapproved brand, size and shape fixed with necessary screws and sealant 43 earthwork in excavation 44 Earth work in excavation by mechanical means (Hydraulic excavator) /manual meansin foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift up to 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.All kinds of soil
