Construction Of Residential Building For Keyi Panyor District, Ap, Lower Subansiri-Arunachal Pradesh

TDR : 51814048

Tender Notice
BOQ

Expired

Lower Subansiri , Arunachal Pradesh

Tender Brief : Construction Of Residential Building For Keyi Panyor District, Ap

Document Fees
₹ 20000 /-

EMD
₹ 4503000.0 /-

Tender Value
Refer document

Submission Date
05-11-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	A. C/o TY-II Quarters 2 Blocks (1 Block = 6 Unit)
2	SH : I : EARTH WORK.
3	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
4	Extra for every additional lift of 1.50 m or part thereof for earth work in all soils including shingles, small size boulders upto 30 cm size but excluding saturated soil and rock.
5	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
6	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
7	Providing and laying Boulder filling
8	SH :- II:CEMENT CONCRETE WORK.
9	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
10	SH : III:R.C.C.WORK
11	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;using coarse aggregate and fine aggregate derived from natural sources,portland Pozzolana/Ordinary Portland/Portland Slag cement,admixtures in recommended proprtions as per IS:9103 to accelerate/retard setting of concret,to improve durability and workability without imparing strenght:including pumping of concrete to site of laying,curing,carriage for all leads:but excluding the cost of centuring,centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge:for the following grades of concrete.
12	All work upto plint levela) Concrete of M25 grade with minimum cement content of 330kg/cum
13	All work above plinth level upto V leveld) Concrete of M25 grade with minimum cement content of 330kg/cum
14	Centring and shuttering including strutting, propping etc and removal of form work for :a)Foundation, footings, bases of columns etc. and mass concrete.
15	b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
16	c)Columns, pillars, posts and struts etc.
17	d)Lintels, beams, girders, bressumers and cantilevers etc.
18	e)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).
19	f)Stairs (excluding landing) except spiral stair cases.
20	g)Vertical and horizontal fins individually or forming box louvers bands and facias
21	Reinforcement of RCC work including bending, binding and placing in position complete.a) Tar/TMT steel
22	SH : IV: BRICK WORK.
23	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
24	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
25	Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork from plinth up to floor two level).
26	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
27	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
28	Extra for half brick masonary in superstructure above floor two level.
29	SH : V : WOOD WORK
30	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
31	Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
32	Providing and fixing factory made uPVC door shutters, decorative typeincluding door frame, with necessary screws and all fittings as per the direction of Engneer-in-charge.
33	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
34	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
35	Providing and fixing aluminum butt hinges anodised, transparent or dyed to required color or shade with necessary screws etc complete.a) 100 x 75 x 4 mm
36	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.a)300 x 10 mm
37	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a)125 mm
38	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a)300 x 16 mm
39	SH : VI : STEEL WORK.
40	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
41	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
42	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
43	Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia ss curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
44	SH:VII:ALUMINIUM WORK
45	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion.1.3. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
46	For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).2.3) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).
47	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)4.1) With float glass panes of 4.0 mm thickness.
48	SH:VIII:FLOORING
49	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.a)Size of Tile 600x600 mm
50	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., completea) Size of Tile 600x600 mm
51	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels(a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm)
52	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.a) Marble work
53	Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.Tiles for Parking
54	SH : IX : FINISHING
55	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
56	6 mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand).
57	Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
58	Applying one coat of cement primer of approved brand and manufacture on wall surface.
59	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
60	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
61	Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
62	Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
63	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
64	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
65	SH:X:DRAINAGE
66	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
67	Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
68	SH:XI:ROOFING
69	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).d)150 mm diameter pipe
70	Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand)and finished neat.
71	SH : XII: WATER SUPPLY.
72	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.a) Concealed work, including cutting chases and making good the walls etc.i) 15 mm nominal outer dia Pipes
73	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a)20mm nominal bore.
74	Providing and fixing brass bib/pillar cock of Jaquar or equivalent quality.a)15mm nominal bore.
75	Providing and fixing brass stop cock of Jaquar or equivalent quality.a)15mm nominal bore.
76	Providing and fixing 3 in 1 Wall Mixer Tap of Jaquar or equivalent quality.a)15mm nominal bore.
77	Providing and fixing PVC connection pipe with brass union 30cm length.a)15mm nominal bore.
78	Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inleta)150 mm dia
79	Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work.a)20mm nominal bore.
80	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 40 mm nominal bore
81	SH:XIII:SANITARY INSTALLATION
82	Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.a) WC pan with white plastic seat and lid.
83	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
84	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap
85	Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins.
86	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
87	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
88	Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).a)750 x 20 mm
89	Providing and fixing toilet paper holder.a) CP Brass
90	Providing best available local wood 50 x 50 x 50 mm wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand).
91	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 100 mm dia
92	Providing and fixing sand cast iron heel rest sanitary bend.b)75mm dia.
93	Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.b) 80 x 80 x 80 mm
94	Providing and fixing sand cast iron single equal plain junction of required degreeb) 80 x 80 x 80 mm
95	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.a)100mm inlet and 100mm outlet.
96	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :a) Kitchen sink with drain board. i) 510x1040 mm bowl depth 250 mm
97	Providing and fixing health faucet (set) with metal tube of Jaquar/ equivalent quality.
98	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
99	SH : XIV UNDERGROUND SUMP
100	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
101	Boulder Soling in foundation and plinth ramming, consolidating and dressing complete.
102	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :a) Foundations and plinth
103	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
104	Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)
105	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
106	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
107	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
108	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
109	Centring and shuttering including strutting, propping etc and removal of form work fora)Foundation, footings, bases of columns etc. and mass concrete.
110	b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
111	c)Columns, pillars, posts and struts etc.
112	d)Lintels, beams, girders, bressumers and cantilevers etc.
113	e)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).
114	12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
115	Neat cement punning.
116	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
117	Providing, Supplying, Testing & Commissioning of 2 Hp Electric Motor Pump for lifting of water
118	SH : XV SEPTIC TANK
119	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
120	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth
121	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
122	Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)
123	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
124	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
125	Centring and shuttering including strutting, propping etc and removal of form work fora) Foundation, footings, bases of columns etc. and mass concrete.
126	b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
127	c)Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height)
128	12 mm cement plaster 1:3( 1 cement : 3 fine sand)
129	Neat cement punning.
130	Providing and fixing C.I manhole cover.
131	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100 mm dia SW pipes
132	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.a) 100 mm dia SW pipes
133	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
134	Providing and fixing sand cast iron single equal plain junction of required degreea) 100 x 100 x 100 mm
135	SH : XVI SOAK PIT
136	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
137	2nd quality local brick honey-comb half brick work in cement mortar 1:4 (1 cement : 4 fine sand).
138	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
139	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
140	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 200 mm dia SW pipes
141	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.a) 200 mm dia SW pipes
142	SH : XVIIFIRE FIGHTING SYSTEM
143	Supply, installation, testing and commissioning of single stage centrifugal type factory assembled fire pumps suitable for autometic operation at synchoronous speed of 2900 rpm, TEFC conforming to IP-55 & flexible coupling gaurd mounted on a common structural base plate with 150mm dia gun metal pressure gauges with isolation cock and piping, suitable vibration elimination pads of approved design for pump foundation, motor to be suitable for 415 volts, 3 phase 50 cycles AC.8hp Pump for Fire Hydrant Network.
144	Supply, installation, testing and commissioning of horizontal single stage centrifugal pumping set with CI volute and bronze impeller with mechanical seals directly coupled to automatic Diesel Engine complete with all accessories like self starting by means of Battery powered electric starter motor, Paper Filter type air cleaner, exhaust silencer etc. complete in allrespects.The engine & the pump will be mounted on common base plate on anti-vibration mountings.Diesel Pump for Fire Hydrant Network.
145	Supply, fabrication (as per code), installation, testing and commissioning of Pressure vessels 450mm diameter and 1000mm high fabricated from 8-10mm M.S. plate with accessories inside painting with epoxy paint and outside with enamel.
146	Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :-100 mm dia
147	Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved.Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door frame 900x2100 door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making 900x600x2100 Recessed type mansoary box (by civil contractor).
148	63mm dia single outlet GM landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be TAC Approved Make.
149	63mm reinforced rubber hoses (RRL) with male and female GM coupling, IS marked- 15 m long.
150	Fire Axe
151	Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 4 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 150 mm diameter Butterfly valve, 1 No. 150mm dia. Non-return valve and wall mountedbox of M.S. construction with glass door to house the above mentioned components.
152	Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction pipe MS class \"C\" 100 mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box M.S. construction with glass door to house the above mentionedcomponenets.
153	Providing and fixing C.I.double acting air valves of approved quality with bolts, nuts, rubber insertions etc. complete ( The tail pieces, tapers etc. if reqd. will be paid separately)100 mm dia
154	Providing & Fixing C.I.sluice valve(with cap)complete with bolts, nuts, rubber insertions etc.(the tail pieces if required will be paid separately)100 mm dia.pipe (Class II)
155	NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.100 mm dia
156	Providing laying, testing & commissioning of “C” class heavy duty MS pipe conforming to IS 1239/3589 (all pipes shall be ISI marked and of makes specified in the specifications) i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in groundincluding excavation & providing cement concrete blocks as supports and anti-corrosive treatment to burried pipes by wrapping & coating with 4 mm thk. (OR 2 COATS of 2mm thick tape) anticorrosion tape along with two coat of black japan primer for under-ground pipeincluding digging and backfilling upto 1.0 mtr. below from G.L.for external work as per IS-909 (Specification for Underground Fire Hydrant . (Under ground)100 nominal bore (class C)
157	Providing, laying, testing & commissioning of “C” class heavy duty MS pipe conforming to IS 3589 and 1239 (all pipes shall be ISI marked and shall be one of approved makes) including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats ofsynthetic enamel paint of required shade complete as per specificatipns and asrequired. (Above Ground)100 mm nominal bore (class C)
158	Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming toIS 2878, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges.Capacity 4.5 kg
159	Fabricating, supplying, testing and commissioning of electrical control panel of 600X250X700mm size, free floor resting, fix type, single front, fabricated out of 16 SWG CRCA Sheet, noncompartmentallised dust and vermin proof, powder coated approved shade after 7 tank treatment process, cable alley interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc., complete in all respects, suitable for operation on 415V, 3 phase 50 Hz., AC supplywith enclosure protection class IP-42as required. INCOMER32A 3P 10kA, C-Curve MCB, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, 8 HP HYDRANT PUMP AC3: 22A AC1: 32A 3P Power Contactor, Coil: 240V AC, Aux. Contact: 1NO, Type: MNX 22,14-23A Thermal Overload Relay, Directly Operated, Direct Mounting on MNX 09-40, Type: MN 2, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Amber Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Red Flush Head Push Button 22.5 mmGreen Flush Head Push Button 22.5 mm, 1NO Contact Block1NC Contact Block, 6A 1P 2Way Local - Remote/ Auto-Manual Switch with Center OFF, 60 Deg. Operation, 6A 1P 10kA, C-Curve MCB, DIESEL ENGINE PUMP CONTROL FEEDER32A 2P 10kA, C-Curve MCB, 10 AMP Battery Charger-24 V DC, AC Relay, DC Relay, 6A 1P 2Way Local - Remote/ Auto-Manual Switch with Center OFF, 60 Deg. Operation, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Amber Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Red Flush Head Push Button 22.5 mm, Green Flush Head Push Button 22.5 mm, DC Voltmeter, 1Ph, Range : 200mV - 600V with Built-in Resistance, Accuracy Class : 1, Size : 96x96, Model: AE 82142, DC Ammeter, 1Ph, Range : 20mA to 5A Direct, Above 5A: External Shunt 50/60/75mV drop, Accuracy Class : 1, Size : 96x96, Model: AE 80142
160	Supplying and Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure withcover platehavinglockingarrangementand watering pipe etc, with charcoal/ coke and salt as required.
161	Supplying and laying 25 mm x 5 mm.G.I. strip in 40 mm dia. G.I. Pipe from earth electrode, including connection with GI nut, bolt, spring, washer excavation and re-filling etc as required.
162	Providing & fixing 25mm x 5mm G.I. strip on surface or in recess forconnections etc. as required.
163	Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwith existing surface/ recessed conduit/ submain wiring/ cable as required.
164	Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of size not exceeding 35 sqmm on surface as required.
165	Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of folloing size on wall surface as required. Aboved 35 sq mm and upto 95 sq mm (clamed with 25x3mm MS flat clam)
166	Supplying of all materials and making terminations of 1.1 KV grade aluminium multicore cables of the following sizes.The work includes cable glanding using brass plated double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/ thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. 3.5 Core 120 sq. mm. Armoured Aluminium cable.
167	3.5 Core 35 sq. mm. Armoured Aluminium cable.
168	3.5 Core 16 sq. mm. Armoured Aluminium cable.
169	Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays).5C x 1.5 Sq. mm
170	Carriage of the Material to Site
171	Yardstick for Furnishing of Residential Quarters
172	SUB HEAD-I( WIRING)
173	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.\"Group \"A\"
174	Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
175	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire
176	2 x 4.0 mm² + 1 x 4.0 mm² earth wire
177	2x10 sqmm +1x 6.0 sq.mm earth wire
178	SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
179	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
180	40 mm
181	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm)
182	3 Module (100mmX75mm)
183	4 Module (125mmX75mm)
184	6 Module (200mmX75mm)
185	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A Switch
186	15/16 A switch
187	3 pin 5/6 amp socket outlet
188	6 pin 15/16 amp socket outlet
189	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
190	Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 A TP&N
191	200 A TP&N
192	400 A TP&N
193	Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.400 A TPN
194	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
195	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door
196	8 way , Double door
197	12 way , Double door
198	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
199	Single pole and neutral
200	Double pole and neutral
201	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A
202	Supplying and fixing brass batten/ angle holder including connection etc. as required.
203	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
204	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
205	Supplying, Installation, testing and commissioning of LEDlamp.\"a) 9 Watt
206	b) 20 Watt
207	c) 40 Watt
208	Supplying and Providing of CelingfanHavells or other approved brand by Engineer-in-Charge
209	Supplying and Providing of exhaustfanHavells or other approved brand by Engineer-in-Charge
210	Supplying of Al. Thimble of following sizes :-35 sqmm
211	95 sqmm
212	SUB-HEAD -III(EARTHING)
213	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
214	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
215	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
216	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
217	B. C/o TY-III Quarters 2 Blocks (1 Block = 6 Unit)
218	SH : I : EARTH WORK.
219	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
220	Extra for every additional lift of 1.50 m or part thereof for earth work in all soils including shingles, small size boulders upto 30 cm size but excluding saturated soil and rock.
221	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
222	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
223	Providing and laying Boulder filling
224	SH :- II:CEMENT CONCRETE WORK.
225	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
226	SH : III:R.C.C.WORK
227	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;using coarse aggregate and fine aggregate derived from natural sources,portland Pozzolana/Ordinary Portland/Portland Slag cement,admixtures in recommended proprtions as per IS:9103 to accelerate/retard setting of concret,to improve durability and workability without imparing strenght:including pumping of concrete to site of laying,curing,carriage for all leads:but excluding the cost of centuring,centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge:for the following grades of concrete.All work upto plint levela) Concrete of M25 grade with minimum cement content of 330kg/cum
228	All work above plinth level upto V leveld) Concrete of M25 grade with minimum cement content of 330kg/cum
229	Centring and shuttering including strutting, propping etc and removal of form work for :a)Foundation, footings, bases of columns etc. and mass concrete.
230	b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
231	c)Columns, pillars, posts and struts etc.
232	d)Lintels, beams, girders, bressumers and cantilevers etc.
233	e)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).
234	f)Stairs (excluding landing) except spiral stair cases.
235	g) Vertical and horizontal fins individually or forming box louvers bands and facias
236	Reinforcement of RCC work including bending, binding and placing in position complete.a) Tar/TMT steel
237	SH : IV: BRICK WORK.
238	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
239	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
240	Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork from plinth up to floor two level).
241	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
242	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
243	Extra for half brick masonary in superstructure above floor two level.
244	SH : V : WOOD WORK
245	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
246	Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
247	Providing and fixing factory made uPVC door shutters, decorative typeincluding door frame, with necessary screws and all fittings as per the direction of Engneer-in-charge.
248	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
249	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
250	Providing and fixing aluminum butt hinges anodised, transparent or dyed to required color or shade with necessary screws etc complete.a) 100 x 75 x 4 mm
251	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.a)300 x 10 mm
252	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a)125 mm
253	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a)300 x 16 mm
254	SH : VI : STEEL WORK.
255	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
256	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
257	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
258	Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia ss curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
259	SH:VII:ALUMINIUM WORK
260	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion.1.3. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
261	For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).2.3) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).
262	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)4.1) With float glass panes of 4.0 mm thickness.
263	SH:VIII:FLOORING
264	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.a)Size of Tile 600x600 mm
265	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., completea)Size of Tile 600x600 mm
266	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm)
267	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.a) Marble work
268	Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.Tiles for Parking
269	SH : IX : FINISHING
270	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
271	6 mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand).
272	Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
273	Applying one coat of cement primer of approved brand and manufacture on wall surface.
274	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
275	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
276	Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
277	Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
278	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
279	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
280	SH:X:DRAINAGE
281	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
282	Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
283	SH:XI:ROOFING
284	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).d)150 mm diameter pipe
285	Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand)and finished neat.
286	SH : XII: WATER SUPPLY.
287	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.a) Concealed work, including cutting chases and making good the walls etc.i) 15 mm nominal outer dia Pipes
288	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a)20mm nominal bore.
289	Providing and fixing brass bib/pillar cock of Jaquar or equivalent quality.a)15mm nominal bore.
290	Providing and fixing brass stop cock of Jaquar or equivalent quality.a)15mm nominal bore.
291	Providing and fixing 3 in 1 Wall Mixer Tap of Jaquar or equivalent quality.a)15mm nominal bore.
292	Providing and fixing PVC connection pipe with brass union 30cm length.a)15mm nominal bore.
293	Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inleta)150 mm dia
294	Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work.a)20mm dia pipe.
295	Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).a) 40 mm nominal bore
296	SH:XIII:SANITARY INSTALLATION
297	Providing and fixing white vitreous china type water closet pedestal (European type WC pan) with seat and lid CP brass hinges and rubber buffers, 12.5 Litres high level CI flushing cistern with fittings RS or CI brackets, galvanized steel telescopic flush pipe with fittings and clamps, 20 GI overflow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting making good the walls and floors where required.a) WC pan with white plastic seat and lid.
298	Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. a) Flat back wash basin size 550x400 mm with a pair of 15 mm CP brass pillar taps of heavy quality.
299	Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap
300	Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins.
301	Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers.
302	Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws.
303	Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality).a)750 x 20 mm
304	Providing and fixing toilet paper holder.a) CP Brass
305	Providing best available local wood 50 x 50 x 50 mm wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 fine sand).
306	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 100 mm dia
307	Providing and fixing sand cast iron heel rest sanitary bend.b)75mm dia.
308	Providing and fixing sand cast iron single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.b) 80 x 80 x 80 mm
309	Providing and fixing sand cast iron single equal plain junction of required degreeb) 80 x 80 x 80 mm
310	Providing and fixing sand cast iron trap of self cleadnsing design with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the walls and floors.a)100mm inlet and 100mm outlet.
311	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :a) Kitchen sink with drain board. i) 510x1040 mm bowl depth 250 mm
312	Providing and fixing health faucet (set) with metal tube of Jaquar/ equivalent quality.
313	Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design.a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).
314	SH : XIV UNDERGROUND SUMP
315	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
316	Boulder Soling in foundation and plinth ramming, consolidating and dressing complete.
317	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in :a) Foundations and plinth
318	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
319	Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)
320	Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
321	Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.a) 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
322	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
323	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
324	Centring and shuttering including strutting, propping etc and removal of form work fora)Foundation, footings, bases of columns etc. and mass concrete.
325	b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
326	c)Columns, pillars, posts and struts etc.
327	d)Lintels, beams, girders, bressumers and cantilevers etc.
328	e)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).
329	12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).
330	Neat cement punning.
331	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
332	Providing, Supplying, Testing & Commissioning of 2 Hp Electric Motor Pump for lifting of water
333	SH : XV SEPTIC TANK
334	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
335	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth
336	Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
337	Reinforced cement concrete in walls (any thickness) including attached pillasters, buttresses, plinth and string course, fillets etc from top of foundation up to floor two level including finishing and plastering the exposed surfaces with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface excluding cost of centring, shuttering and reinforcement in :a) M20 (1 cement : 1.5 corase sand : 3 stone aggregate 20 mm nominal size)
338	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
339	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
340	Centring and shuttering including strutting, propping etc and removal of form work fora) Foundation, footings, bases of columns etc. and mass concrete.
341	b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
342	c)Suspended floors, roofs, landing shelve and theirsupports, balconies and chajjas (3.50m height)
343	12 mm cement plaster 1:3( 1 cement : 3 fine sand)
344	Neat cement punning.
345	Providing and fixing C.I manhole cover.
346	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 100 mm dia SW pipes
347	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.a) 100 mm dia SW pipes
348	Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.
349	Providing and fixing sand cast iron single equal plain junction of required degreea) 100 x 100 x 100 mm
350	SH : XVI SOAK PIT
351	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
352	2nd quality local brick honey-comb half brick work in cement mortar 1:4 (1 cement : 4 fine sand).
353	Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
354	Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
355	Providing laying and jointing glazed stone ware pipe grade \"A\" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. a) 200 mm dia SW pipes
356	Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design.a) 200 mm dia SW pipes
357	SH : XVIIFIRE FIGHTING SYSTEM
358	Supply, installation, testing and commissioning of single stage centrifugal type factory assembled fire pumps suitable for autometic operation at synchoronous speed of 2900 rpm, TEFC conforming to IP-55 & flexible coupling gaurd mounted on a common structural base plate with 150mm dia gun metal pressure gauges with isolation cock and piping, suitable vibration elimination pads of approved design for pump foundation, motor to be suitable for 415 volts, 3 phase 50 cycles AC.8hp Pump for Fire Hydrant Network.
359	Supply, installation, testing and commissioning of horizontal single stage centrifugal pumping set with CI volute and bronze impeller with mechanical seals directly coupled to automatic Diesel Engine complete with all accessories like self starting by means of Battery powered electric starter motor, Paper Filter type air cleaner, exhaust silencer etc. complete in allrespects.The engine & the pump will be mounted on common base plate on anti-vibration mountings.Diesel Pump for Fire Hydrant Network.
360	Supply, fabrication (as per code), installation, testing and commissioning of Pressure vessels 450mm diameter and 1000mm high fabricated from 8-10mm M.S. plate with accessories inside painting with epoxy paint and outside with enamel.
361	Providing, fixing, testing & commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 8.8 Kg/cm2 and test pressure 14 Kg/cm2 for :-100 mm dia
362	Supply, installation, testing, trial run and commissioning of hydrants all complete as required and as approved.Providing and fixing angle iron (40 mm x 40 mm x 5 mm) MS door frame 900x2100 door capable of accommodating fire hose reel, landing valve, hose pipes, fittings & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with post office red colour (approval shall be taken on the basis of submitted sample before ordering) Cost of fire extinguishers not included in item rate. (Liasioing with civil contractor for making 900x600x2100 Recessed type mansoary box (by civil contractor).
363	63mm dia single outlet GM landing valve IS marked with suitable size bolts, nuts, washers and gaskets. Landing valve shall be TAC Approved Make.
364	63mm reinforced rubber hoses (RRL) with male and female GM coupling, IS marked- 15 m long.
365	Fire Axe
366	Providing, installing, testing & commisioning of fire brigade inlet connection (fire department connection) consisting of 4 Nos. 63 mm dia instantaneous inlet arranged on a 50 mm dia header, 1 No. 150 mm diameter Butterfly valve, 1 No. 150mm dia. Non-return valve and wall mountedbox of M.S. construction with glass door to house the above mentioned components.
367	Providing, installing, testing & commisioning of fire brigade draw out connection (fire department connection) with suction pipe MS class \"C\" 100 mm dia. & 100 mm dia. foot valve & steel chain including wall mounted box M.S. construction with glass door to house the above mentionedcomponenets.
368	Providing and fixing C.I.double acting air valves of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if reqd. will be paid separately)100 mm dia
369	Providing & Fixing C.I.sluice valve(with cap)complete with bolts, nuts, rubber insertions etc.(the tail pieces if required will be paid separately)100 mm dia.pipe (Class II)
370	NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified.100 mm dia
371	Providing laying, testing & commissioning of “C” class heavy duty MS pipe conforming to IS 1239/3589 (all pipes shall be ISI marked and of makes specified in the specifications) i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in groundincluding excavation & providing cement concrete blocks as supports and anti-corrosive treatment to burried pipes by wrapping & coating with 4 mm thk. (OR 2 COATS of 2mm thick tape) anticorrosion tape along with two coat of black japan primer for under-ground pipeincluding digging and backfilling upto 1.0 mtr. below from G.L.for external work as per IS-909 (Specification for Underground Fire Hydrant . (Under ground)100 nominal bore (class C)
372	Providing, laying, testing & commissioning of “C” class heavy duty MS pipe conforming to IS 3589 and 1239 (all pipes shall be ISI marked and shall be one of approved makes) including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats ofsynthetic enamel paint of required shade complete as per specificatipns and asrequired. (Above Ground)100 mm nominal bore (class C)
373	Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body, internal discharge tube, discharge nozzle, suspension bracket, conforming toIS 2878, finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. Capacity 4.5 kg
374	Fabricating, supplying, testing and commissioning of electrical control panel of 600X250X700mm size, free floor resting, fix type, single front, fabricated out of 16 SWG CRCA Sheet, noncompartmentallised dust and vermin proof, powder coated approved shade after 7 tank treatment process, cable alley interconnection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc., complete in all respects, suitable for operation on 415V, 3 phase 50 Hz., AC supplywith enclosure protection class IP-42as required. INCOMER32A 3P 10kA, C-Curve MCB, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Yellow Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Blue Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC8 HP HYDRANT PUMP AC3: 22A AC1: 32A 3P Power Contactor, Coil: 240V AC, Aux. Contact: 1NO, Type: MNX 22, 14-23A Thermal Overload Relay, Directly Operated, Direct Mounting on MNX 09-40, Type: MN 2, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Amber Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Red Flush Head Push Button 22.5 mm, Green Flush Head Push Button 22.5 mm, 1NO Contact Block, 1NC Contact Block, 6A 1P 2Way Local - Remote/ Auto-Manual Switch with Center OFF, 60 Deg. Operation, 6A 1P 10kA, C-Curve MCBDIESEL ENGINE PUMP CONTROL FEEDER32A 2P 10kA, C-Curve MCB, 10 AMP Battery Charger-24 V DC, AC Relay, DC Relay, 6A 1P 2Way Local - Remote/ Auto-Manual Switch with Center OFF, 60 Deg. Operation, Red Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Amber Gen Next Pro LED Indicator 22.5 mm, Voltage: 240V AC, Red Flush Head Push Button 22.5 mm, Green Flush Head Push Button 22.5 mm, DC Voltmeter, 1Ph, Range : 200mV - 600V with Built-in Resistance, Accuracy Class : 1, Size : 96x96, Model: AE 82142, DC Ammeter, 1Ph, Range : 20mA to 5A Direct, Above 5A: External Shunt 50/60/75mV drop, Accuracy Class : 1, Size : 96x96, Model: AE 80142
375	Supplying and Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure withcover platehavinglockingarrangementand watering pipe etc, with charcoal/ coke and salt as required.
376	Supplying and laying 25 mm x 5 mm.G.I. strip in 40 mm dia. G.I. Pipe from earth electrode, including connection with GI nut, bolt, spring, washer excavation and re-filling etc as required.
377	Providing & fixing 25mm x 5mm G.I. strip on surface or in recess forconnections etc. as required.
378	Providing and Fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing alongwith existing surface/ recessed conduit/ submain wiring/ cable as required.
379	Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of size not exceeding 35 sqmm on surface as required.
380	Laying and fixing of One number PVC Insulated and PVC Sheathed/XLPE power cable of 1.1 kV grade of folloing size on wall surface as required. Aboved 35 sq mm and upto 95 sq mm (clamed with 25x3mm MS flat clam)
381	Supplying of all materials and making terminations of 1.1 KV grade aluminium multicore cables of the following sizes.The work includes cable glanding using brass plated double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type copper lugs/ thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. 3.5 Core 120 sq. mm. Armoured Aluminium cable.
382	3.5 Core 35 sq. mm. Armoured Aluminium cable.
383	3.5 Core 16 sq. mm. Armoured Aluminium cable.
384	Control Cabling (PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays).5C x 1.5 Sq. mm
385	Yardstick for Furnishing of Residential Quarters
386	Carriage of the Material to Site
387	SUB HEAD-I( WIRING)
388	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.\"Group \"A\"
389	Wiring for light / power plug with 2x4 mm² FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 No 4 mm² FR PVC insulated copper conductor single core cable for loop earthing as required
390	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire
391	2 x 4.0 mm² + 1 x 4.0 mm² earth wire
392	2x10 sqmm +1x 6.0 sq.mm earth wire
393	SUB-HEAD-II (PVC CONDUIT, METAL BOXES, SWITCHES & ACCESSORIES)
394	Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
395	40 mm
396	Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm)
397	3 Module (100mmX75mm)
398	4 Module (125mmX75mm)
399	6 Module (200mmX75mm)
400	Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A Switch
401	15/16 A switch
402	3 pin 5/6 amp socket outlet
403	6 pin 15/16 amp socket outlet
404	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
405	Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100 A TP&N
406	200 A TP&N
407	400 A TP&N
408	Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required.400 A TPN
409	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door
410	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door
411	8 way , Double door
412	12 way , Double door
413	Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
414	Single pole and neutral
415	Double pole and neutral
416	Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A
417	Supplying and fixing brass batten/ angle holder including connection etc. as required.
418	Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
419	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
420	Supplying, Installation, testing and commissioning of LEDlamp.a) 9 Watt
421	b) 20 Watt
422	c) 40 Watt
423	Supplying and Providing of CelingfanHavells or other approved brand by Engineer-in-Charge
424	Supplying and Providing of exhaustfanHavells or other approved brand by Engineer-in-Charge
425	Supplying of Al. Thimble of following sizes :-35 sqmm
426	95 sqmm
427	SUB-HEAD -III(EARTHING)
428	Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
429	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
430	Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required
431	Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
432	C. C/o TY-IV Quarters 1-Block (1 Block-6 Unit)
433	SH : I : EARTH WORK.
434	Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides offoundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.
435	Extra for every additional lift of 1.50 m or part thereof for earth work in all soils including shingles, small size boulders upto 30 cm size but excluding saturated soil and rock.
436	Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete.
437	Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.
438	Providing and laying Boulder filling
439	SH :- II:CEMENT CONCRETE WORK.
440	Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth
441	SH : III:R.C.C.WORK
442	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;using coarse aggregate and fine aggregate derived from natural sources,portland Pozzolana/Ordinary Portland/Portland Slag cement,admixtures in recommended proprtions as per IS:9103 to accelerate/retard setting of concret,to improve durability and workability without imparing strenght:including pumping of concrete to site of laying,curing,carriage for all leads:but excluding the cost of centuring,centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge:for the following grades of concrete.All work upto plint levela) Concrete of M25 grade with minimum cement content of 330kg/cum
443	All work above plinth level upto V leveld) Concrete of M25 grade with minimum cement content of 330kg/cum
444	Centring and shuttering including strutting, propping etc and removal of form work for :a)Foundation, footings, bases of columns etc. and mass concrete.
445	b)Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
446	c)Columns, pillars, posts and struts etc.
447	d)Lintels, beams, girders, bressumers and cantilevers etc.
448	e)Suspended floors, roofs, landings shelves and their supports balconies and chajjas (3.5m height).
449	f)Stairs (excluding landing) except spiral stair cases.
450	g)Vertical and horizontal fins individually or forming box louvers bands and facias
451	Reinforcement of RCC work including bending, binding and placing in position complete.a) Tar/TMT steel
452	SH : IV: BRICK WORK.
453	Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand).
454	Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
455	Extra for brick work in superstructure above floor two level, per floor per Cu.m. (1% of rate of brickwork from plinth up to floor two level).
456	Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.
457	Extra for half brick masonry in superstructure above plinth level and up to floor two level.
458	Extra for half brick masonary in superstructure above floor two level.
459	SH : V : WOOD WORK
460	Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position.
461	Supplying and fixing factory made panelled shutters made out of best available hard wood for doors including panelling with panels 12 mm thick commercial veneered teak wood particle boards (Phenyle Bonded) 3 layers flat pressed including applying one coat of approved wood primer.a) 40 mm thick including anodized aluminum butt hinges with necessary screws.
462	Providing and fixing factory made uPVC door shutters, decorative typeincluding door frame, with necessary screws and all fittings as per the direction of Engneer-in-charge.
463	Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size).
464	Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws.b) Ornamental grill.
465	Providing and fixing aluminum butt hinges anodised, transparent or dyed to required color or shade with necessary screws etc complete.a) 100 x 75 x 4 mm
466	Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessaryscrews etc complete.a)300 x 10 mm
467	Providing and fixing aluminum Handles anodised transparent or dyed to required color or shade with necessary screws etc complete.a)125 mm
468	Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. a)300 x 16 mm
469	SH : VI : STEEL WORK.
470	Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete.
471	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
472	Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
473	Providing and fixing 12 mm thick and 100 mm wide pelmet with 25 mm dia ss curtain rod and brackets including fixing with 25 x 3 mm MS flat 10 cm long and plugs etc complete.
474	SH:VII:ALUMINIUM WORK
475	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) :For fixed portion.1.3. Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
476	For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).2.3) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron).
477	Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge. (Cost of aluminium snap beading shall be paid in basic item)4.1) With float glass panes of 4.0 mm thickness.
478	SH:VIII:FLOORING
479	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.a)Size of Tile 600x600 mm
480	Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., completea)Size of Tile600x600 mm
481	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(a) Granite stone slab of colour black, Cherry/Ruby red 18 mm thick (slab area upto 0.50 sqm)
482	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.a) Marble work
483	Providing and laying matt finished vitrified tile of size 100x100x16mm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in out door floors such as footpath, court yard multi models etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as direction of Engineer-in-Charge.Tiles for Parking
484	SH : IX : FINISHING
485	12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
486	6 mm cement plaster to ceiling 1 : 4 (1 cement : 4 fine sand).
487	Providing two coats of acrylic water based wall putty/ wall filler of Asian Paits/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the halp of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.
488	Applying one coat of cement primer of approved brand and manufacture on wall surface.
489	Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.
490	Painting two coats with oil type wood preservative of approved brand and manufacture on new work.
491	Applying priming coat consisting of a mixture of red lead, white lead and double boiled linseed oil in the ratio of 0.7 Kg : 0.7 Kg : 1 Litre on wood work complete.
492	Applying priming coat of a mixture of red lead raw linseed oil and turpentine oil in the ratio of 2.80 Kg : 1 Litre : 1 Litre on steel work complete.
493	Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade.
494	Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.
495	SH:X:DRAINAGE
496	Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.
497	Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
498	SH:XI:ROOFING
499	Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand).d)150 mm diameter pipe
500	Lime concrete terracing on roofs, average thickness 10 cm laid to fall with 25 mm gauge brick ballast and 50% mortar consisting of 1 lime putty and 2 surki finished with gur and belgiri treatment complete and covered with flat brick tiles grouted with cement mortar 1 : 3 (1 cement : 3 fine sand) over 12 mm layer cement mortar 1 : 3 (1 cement : 3 fine sand)and finished neat.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Arunachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Residential Building For Keyi Panyor District, Ap, Lower Subansiri-Arunachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Residential Building For Keyi Panyor District, Ap, Lower Subansiri-Arunachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us