Tender For Special Repairs Cum Addn Altn To Bldgno P37 P39 12 Qtrs Np88 08 Qtrs At Suranussi Under Age I Suranussi; 1 Demolition of brick work built in cement mortarincluding all quoins arches etc, complete, all as specified & directed. 2 Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level, complete, all as specified & directed. 3 Taking down cement or cement lime plaster incl raking out joints hacking for keys srubbing down with water etc, complete, all asdirected. 4 Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site, complete, all asdirected. 5 Taking down chowkats or frames with Shutters( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm each and removing from site, complete, all as directed. 6 Taking shutter only of any desription of sizen. exc 1 sqm , complete, all asdirected. 7 Taking shutter only of any desription of size exc 1 sqm and n.exc 2sqm, complete, all as directed. 8 Taking shutter only of any desription of size exc 1 sqm and n.exc 2 sqm but refixing in the same opening, complete, all asdirected. 9 M&L forbrick work , with sub class B bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, complete, all as specified & directed. 10 All as per description of item No. 9 above but except bricks . 11 M&L for 15mm thick cement plastering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces,finished even & smooth without using extra cement, complete, all as specified & directed. 12 M&L for 15 mm thick cement plastering in cement mortar (1:4) on fair faces of brick work or concrete surfaces,finished even & smooth without using extra cement, complete, all as specified & directed. 13 M&L for 5 mm th rendering in cement mortar in 1:3 on ceiling surfaces, complete, all as specified & directed. 14 M&L for 35 mm thickIInd class HW , factory madePlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete, all as specified & directed. 15 M&L for 35mm thickIInd class HW glazed /gauged shutters open rebatd and prepared to receive glass /gauge etc without sashbars edges of framing plain or chamferedr rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.24 (a) including helical Door spring complete all as specified and directed . 16 S&F solid PVC door frame of sie 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing and as directed. 17 S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC C channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on eitherside& as gap insertfor top rail & bottom rail . Panellingof plain of plain colurPVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings and as directed. 18 S&F aluminium framepowder coated with minimum thickness of powder coating 50 micron for doors, windows, ventilatorswith one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. complete all as specified and directed. Note:- Prelaminated partical board and sheet glass/wiremesh shall be measured and paid for separately. 19 S & F for aluminium window and ventilator shutters, powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar,hook and eye closure Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. with chowkhat complete all as specified & directed. 20 S & F for aluminium window and ventilator shutters, powder Coating (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,hook and eye closure,Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed. 21 M&L for aluminium powder coated framed work such as grill, grating etc with end of bars rivetted or screwed with stainless steeland rivetted etcall as specified & directed 22 S&F 300mm size mild steel sliding door bolt plate type stove enamelledblack with bright bolt not less than 12mm diaincl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified 23 S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc, complete, all as specified & directed. 24 S&F 150 mm size mild steel pressed handle oval typestove enamelled black, complete, all as specified & directed. 25 S&F 100 mm size colr rolled mild steel butt hinges medium weight, complete, all as specified & directed. 26 S&F floor door stopperaluminiumalloy body and tounge 140mm anodised with hard drawn steel spring etc, complete, all as specified & directed. 27 S&F in repair block board 12mm thickcommercial typeexterior gradefixed to timber frame work, complete, all as specified & directed. 28 M & Lfor 25 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and white balaancing other side , andfixed with screws with timber frame work lipping with frame complete all as specified and directed 29 S&Fgalvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm and fixed withsteel wire staple, complete, all as specified & directed. 30 S&F in repair galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm and fixed withsteel wire staple, complete, all as specified & directed. 31 S&F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black in square n.exc0 .5sqm in each pane, and fixed with stainless steel wire staple, complete, all as specified & directed. 32 S & F 4.0 mm thick glass sheet ordinary quality glazing fixing in aluminium frame black in square exc0 .5sqm in each pane, and fixed with stainless steel wire staple, complete, all as specified & directed. 33 Demolition of stone slabs,floor, hearth or wall tilling incl cement mortar bedding (but not backing), remvoving serviceable tiles to storeand rubbis off the premises complete all as specified and directed. 34 M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match , over and including 15 mm thick screed or bedding layer in CM 1:6,complete all as specified and directed 35 M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match , over and including 15 mm thick screed or bedding layer in CM 1:6 complete all as specified and directed 36 M&L for glazedceramictiles coloured of size 450 mm x 350 mm x 7mm thick on vertical surfaces such as in skirting, dado etc overand including 10 mm thick backing coat in CM 1:4, complete all as specified and directed. 37 M&L for 20-25 mm thick machine cut kota stone slab flooring in staircase over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over and including 20 mm thick screed or bedding layer in CM 1:6 complete all as specified and directed 38 M & Lfor 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed 39 M&L for roundingedges of granite stone slabs edge,in steps, cooking plattorm, and other similar situations,complete, all as specified & directed. 40 M&L for 50mm thick PCC 1:2:4 type B1 as in flooring including finishing the surface even and smooth without using extra cement etc, complete, all as specified & directed. 41 S&F in repair vitreous china squatting pan ‘Orissa patten’ size 580x440mm white with intergral foot rest (excluding flushing cistern and flush pipe)with P or S trap including water connection to trap and flushing pipe, flushing cistern etc incl lime concrete bedding and PCC 1:2:4 for making good the floor fixed in repair complete all as specified and directed . 42 S & F in repair PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore, connection to WC pan & PVC connection 15mm size with PTMT nuts of length 300mm, complete, all as specified & directed. 43 Supply and fix for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck)chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. 44 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick PVC frame or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc, complete, all as specified & directed. 45 S&F in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops & rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM) 46 Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed. 47 Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed. 48 Demolition of cement Concreteof any description and in any position not otherwise specifically provided for,complete all as specified anddirected. 49 M&L for PCC 1:5:10, type E-2 using 40mm size brick aggregates in sunken floor, complete all as specified anddirected. 50 M&L for 50mmaverage consolidated thickness pcc 1:3:6,type C2 withusing 20mm graded stone aggregate as in padding on flat roofs etc, complete all as specified anddirected. 51 Supply only Integral water proofing compound, ISI marked. 52 M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed. 53 M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and directed. 54 M&L for 40mm thick brick tiles laid on cement mortar bed ( 1:3) with WPC and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed in CM (1:3)complete all as specified anddirected. 55 All as per itemNo 55 above but except brick tiles. 56 M&Lfor 25 mm thick PCC 1:2:4,type B-1 using 20 mm graded crushed stone agg as in levelling course,complete all as specified and directed. 57 All as per item No 56 above but PCC 1:2:4, type B-0 using using 12.5 mm graded crushed stone agg 58 M&L for 20 mm thick cement concrete tiles,square, area of 200x200 mm each tile, machine pressed as on roof etc,set and jointed inneat cement slurry and pointed in grey cement to match , over and including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified and directed. 59 M&L for Providing, cement concrete type B1,1:2:4 (using 20 mm graded crushed stone aggregate), asin roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates etc ,complete all as specified and directed. 60 Cutting groovesof size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3), complete all as specified and directed. 61 Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity 62 S&F Rotational moulded polythene water storage tanks double layered (cylinder each vertical with closed top) of capacity 500 Itrs, ISI marked, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 63 S&F brass CP wall mixer for mixing Hot and Cold water 15 mm bore screwed down for iron pipe and complete all as specified & directed. 64 Taking up/ down GI tubing and connections with all fittings 15 mm bore 65 Taking up/ down GI tubing and connections with all fittings 20 mm bore 66 S&F 15 mmdia GI tubingand connections fixed to wall or ceiling,laid in floor etc, complete all as specified and directed. 67 All as per item No. 66 above but fixing only. 68 S&F 20 mmdia GI tubingand connections fixed to wall or ceiling,laid in floor etc, complete all as specified and directed. 69 All as per item No. 68 above but fixing only. 70 M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, exceeding 20cm girth,complete all as specified and directed. 71 S&F in repairCP shower rose 15mm size fixed to iron pipe, complete all as specified and directed. 72 S&F PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed. 73 S&F in repair 15mm CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed ,complete all as specified and directed. 74 S&F in repair 15mm size brass stop valveswith crutch or butterfly handles high pressure screwed both endsfor iron pipe,complete all as specified and directed. 75 S&F in repair 15 mm bore stop valve cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe etccomplete all as specified anddirected. 76 S&F in repair 20mm size stop valves PTMT high pressure screwed for iron pipe,complete all as specified and directed. 77 S&F in repair towel rail 600mm long of PTMT incl cp brass srews etc,complete all as specified and directed. 78 Dismantling wrought iron or mild steel work of any description not otherwise provided for , all as directed. 79 M & L for framed work such as grill grating etc with end of bars rivetted or shouldered and rivetted or forged in to spikes, framed guard bars etc all as specified (Fe 290 Gde E-165) 80 S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165), complete all as specified anddirected. 81 M&L forpreparing new surfaces ofwalls and applying two coats of oil bound distemper over a coat of alkali primer, complete all as specified anddirected. 82 M&L for Complete removal of existing treatment of walls and applying two coat of oil bound distemper over and including a coat of primer over 2 mm thick finished coat ofwall care putty on plastered surface, complete all as specified and directed. 83 M&L for Complete removal of existing treatment of walls to prepare the surface even and smooth complete all as specified and directed 84 M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with colour scheme change, completeall as specified and directed 85 M&L forpreparation of old plastered surfaces and applying one coat of white wash on walls, complete all as specified and directed. 86 M&L for for preparation of newly plastered ceiling surfacesand applying three coats of white wash, complete all as specified and directed. 87 M&L for applying one coats of white wash on ceiling on old white washed ceiling surfaces, complete all as specified and directed. 88 M&L for preparation of new wooden surface, over 10 cm width or girth and applying two coats synthetic enamel paintover a coat of pink primer, complete all as specified and directed. 89 All as per itemNo. 88 above but applying one coat on old treated surface. 90 M&L for preparation of new steel surface, over 10 cm width or girth and applying two coats synthetic enamel paintover a coat of red oxide or zinc chrome primer, complete all as specified and directed. 91 All as per itemNo. 90 above but one coat of paint on old treated steel surface. 92 M&L for Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate ), asin roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc, complete all as specified and directed. 93 M&L for 75 mm thPCC 1:3:6type C2 as in plinth protectionwith using 40mm graded stone aggregate etc all as specified. Note: Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in altranative bays not exceeding 3m in length. Joints of 6 mm wide 10 mm deep shall be provided along the wall and bays and same shall be filled with between mastic (1:3) 94 S&F in repair PVC SWR pipe 110 mm bore,single socketed in any length with rubber ring joints fixed to walls etc,complete all as specified and directed. 95 S&F in repair PVC SWR pipe 110 mm bore, single socketed in any length laid in tenches etc, complete all as specified and directed. 96 S&F in repair PVC SWR pipe 75 mm bore, single socketed in any length with rubber ring joints fixed to walls etc, complete all as specified and directed. 97 S&F in repair PVC SWR pipe 75 mm bore,single socketed in any length laid in tenches etc, complete all as specified and directed. 98 S&F 110 mm bore PVC SWR type bends, any radius, complete all as specified and directed. 99 S&F 75 mm bore PVC SWR type bends any radius, complete all as specified and directed. 100 S&f 100 mm dia stack clampmade out of25x4mmFlat iron etc, complete all as specified and directed. 101 S&f 75mm dia stack clampmade out of25x4mmFlat iron etc, complete all as specified and directed. 102 Cutting groovesof size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3) etc, complete all as specified and directed. 103 S&F in repair sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm,complete all as specified and directed. 104 Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for, complete all asdirected. 105 Form work to soffits of suspended slab such as roof slab,kitchen slabn exc200mm thick (horizontal/sloping/vertical) with fair finished surface, complete all as specified and directed. 106 M & Lfor TMT bars6mm to 8mm dia. cut to length bent to shape required including cranking, bendingand binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips, complete all as specified and directed. 107 M & L for reinforced cement concrete (nominal mix) TypeB0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge 108 S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc, complete all as specified and directed. 109 Demolition of cement conc in ground floor and pavings not exceeding 15 cm thick above or below ground level. 110 M&L forPCC1:4:8, type D-2using 40 mm graded stone agg as in mass filling and sub base, complete all as specified and directed. 111 M & Lfor Machine pressed precast concrete. interlocking paver block any shape (rectangulat/star with PU coating etc.) (Red/yellow)any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and with pigmentas in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete, all as specified & directed. Note:- Sand for sand bedding shall be measured separately as supplied only. 112 Supply only sand for sand filling under interlocking paver blocks. 113 Taking down carefully aluminimum point wiring on TW Batten/in conduit / with conduit (light/Fan/socket or power) complete and making good the disturbed surface of wall/ceiling etc including taking down fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc and removing material from site complete all as directed. 114 Material and Labour for concealed point wiring complete with1.5 Sq.mm (nominal area) FRLS PVC insulated multi stranded copper conductor in and including 20mm dia PVC conduit (wall thickness 1.6 mm) medium grade inculding fitting & accessories, with MS concealed terminal boxes with 3mm thicklaminated bakelite (Hylum/Anchor) sheet top cover for mounting switch,socket etc for one light/bell point controled by one switch with PVC cable copper conductor including 1.5 Sqmm multi stranded copperconductor with green FRLS PVC insulating earth common earth dolly, complete all as specified. 115 All as per ser No 115 abovebut for One ceiling fan/exhaust fan point controlled by one, one way switch. 116 All as per ser item 115 above but for 3 pin socket out let 5 Amps on same board 117 All as per ser item 115 above but for 3 pin socket out let 5 Amps on independent board. 118 All as per srl item No 115 above but for 3 pin socket outlet 15 Amps with 2.5 Sqm stranded copper conductor FRLS PVC unsheathed cable independent including FRLS PVC cable copper conductor 2.5Sqmm with green insulator as earth wire with cast iron/pressed steel terminal box all as specified. 119 All asper item No 115 above but one light point controlled by two, two way switches 120 Supply and fixing switch piano flush type 5 Amp single pole one way complete all as specified and as directed. 121 Supply and fixing switch piano flush type 15Amp flush type single pole one way complete all as specified and as diirected. 122 Supply and fixing switch piano 5 Amps flush type single pole two way switch complete all as specified and as directed. 123 Supply and fixing socket outlet 5 Pin 5 Amps flush type multi purposecomplete all as specified and as directed. 124 Supply and fixing socket outlet multi purpose 2 in one, 6 pin 15/16 Amps flush type, complete all as specified and as directed. 125 Supply and fixing fan regulator electronic step type socket type and making connection, complete all as specified and as directed. 126 Supply and fixing lamps holder, PVC/Polycarbonate type with cord grip cap each suitable for pendant fittings complete all as specified and as directed. 127 Supply and fittingcall bell single phase 240 volt complete all as specifiedand as directed. 128 Supply and fitting bell push flush type 5 Amps complete all as specifiedand as directed. 129 Supply and fixing ceiling rose surface bakelite 65 x 50mm three treminal complete all as specified anddirected. 130 Taking down existing ceiling fan , dismantling blades kept safe custudyand refixing after cleaning and paintingincl conecting up with three core flexible cable from ceiling rose to fan, complete all asdirected.. 131 Supply and fixing LED light fitting 1x20W, 220V, AC decorative box type with driver aluminium base, holder including LED tubelight connectingup with three core flexible copper conductor cable of suitbale size from ceiling rose complete all as specified anddirected. 132 Supply and fixing LED light fitting mirror type high output diffuser 2 feet, 10 watt 220V AC decorative type with driver holder and LED lamp including connection up with three core flexible copper conductor cable of suitable size complete all as specified anddirected. 133 Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connection up with three core flexible coper conductor cable of suitable size complete all as specified anddirected. 134 Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistanttoughened glass complete with driver, lamp bracket made up of 25mm GI pipe with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, complete all as specified and as directed. 135 Supply and fixing sheet steel enclouser with double door, detachable gland plates flush/surface mounting for MCB fitted with bus bar, earth bar and neutral link 8 way SPN 240 V incl taking down old unserviceable complete all as specified anddirected. 136 Supply and fixing sheet steel metal enclouser (DB) triple pole and neutral 4 way 415,volt with 200 amps rated bus barincl taking down old unserviceable ccomplete all as specified anddirected. 137 Supply and fixingminature circuit breaker (MCB) SPN 32 Amps rating 240V 10KA C curve complete all as specified anddirected. 138 Supply and fixing miniature circuit breaker (MCB) SP 6 to 32 amps rating 240V,10KA C Curve complete all as specifiedand directed. 139 Supply and fixingminiature circuit breaker (MCB) of capacity 63 Amps TPN 415V,10KA C curve complete all as specifiedanddirected. 140 M&L for wiring with two runs of single 6 sqmm FRLSH PVC insulated unsheated multistranded 1100 vols grade with copper conductor drawn through and including in PVC concled conduit 20mm bore, ISI marked and its accessories including one runof single core 6 sqmm FRLSH PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth contuinity conductor along with the wiring and connected from DB to DB /main board incl taking down old unserviceable submain wiring complete all as specified anddirected. Note :- Two runs of 6.00 Sqmm cable & one run of 6.00 Sqmm cable incl PVC conduit shall be paid as one unit length. 141 Supply and fixingexhaust fan steel body, AC, single Phase, 230 V of size 300 mm sweep with blades and frame and lovers,complete, all as specified and directed. 142 Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with single MCB 20 Amp 240 V for geyser all as specified. 143 Supply and fixing of Exhaust fan made of sturdy Engineering plastic complete with lovers shutter,voltage 230 V 50 HZ 1200 RPM Copper winding of sweep 250 mm, complete all as specified and directed. 144 Supply and fixing for water heater storage type steel body with stainless steel inner tank and heating element upto 2 KW Capacity 25 Litre BEE 5 Star rated complete including PVC connection two numbers (suitable for hot water) with all accessories such as safety valve, thermostat NRV,connection piece etc.,complete all as specified and as directed. 145 Material and labour for replacment of earthing with galvanized iron earth plate electrode 600mmX600mm,6mm thick buried directly in ground verticvally in a earth pit not less than 2.25mtrbelow normal ground level with top edge of the plate not less than 1.5mtr below normal ground level connected to GI earth wire 4mm dia by means of GI bolts , nuts, check nuts and washers ( earth plate covered with alternate layers of charcoals dust and common salt 15cm thick), GI earth wire protected by GI pipe light grade 15mm dia upto switch borad and connected to main switch board including provision of GI pipe 20mm dia light grade watering pipe with funnel and wiremesh, all as shown in electrical plate No. 3 of SSR Part-1 , including PCC chamber(1:3:6) using 20mm graded stone aggregate and CI cover and frame including all necessary excavation and earth work and taking out old earthingcomplete all as specified and directed 146 M&L for opening for exhaust fan cuttings of holes in PCC or through bricks walls upto 250/300 mm dia making good in cement mortar 1:3 or cement concrete 1:2:4 type B2 as required making good the disturbed portion, all as specified and directed. 147 S&F GI pipe light grade of dia 40 mm laying in road and along with poles for cable protection, complete all as specified and as directed. 148 Supply , laying and testing cable XLPE insulated , PVC sheathed , PVC bedded , galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 25 sq mm 4 corewhile taking down the old cable, complete, all as specified and directed. 149 Excavation in trenchesnot exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cables, GI pipe etcnot exceeding 10 sqm on plan and getting out in soft/loose of soil, complete all as specified & directed. 150 Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick soft/loose soil, all as specified & directed. 151 Removing excavated soil to a distance not exceeding 50 m and depositingwhere directed at a level not exceeding 1.5 mabove the starting point soft /loose soil,complete,all as directed. 152 M&L for sand cushioning with 8 cm sand beneath the cable and 15 cm above the under ground cable below the sand and gently punning the sand above the cable upto10 cm to cushioning to cable complete all as specified & directed.Note : The payment will be made for the punned 18 cm thickness. 153 Supply and fix common burnt clay building brick Sub class B designation75 and laying it perpendicular along the length of the cable all as specified and directed.
