Restoration, Conservation And Development Work At Mukundeshwar Temple And Mukund Talab, Trimbakeshwar, Nashik- 1 Removal of plants / ficus grown by pulling out root system embedded in masnory,cutting stem and application of high/gur/lime formulation as specified by theArchitect or other patented chemical biocide treatment such as biocide Glycel (iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete. 2 Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete 3 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. 4 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 5 Numbering the monument elements in proper order before lowering down with approved colour and shade as directed by Engineer in-charge, including ladder, scaffolding etc. complete. 6 Loweringdowncarefullyexistingstonemasonryofthemonumentmanuallyinproperorder including shifting the stone elements up to a distance of 50 meter beyond the monument area and stackingthemasdirectedby Engineerin-charge,removingbuilding rubbishandcleaning thesite etc. complete. 7 Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. 8 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. Additional Item Spec. No. : As directed by Engineer in charge. 9 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the buildingarea & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means 10 Removingtheexistingcementplasterofanythicknesswithoutcausingdustnuisanceand stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. 11 Raking out joints in lime or cement mortar and preparing the surface forre-pointing or replastering including disposal of rubbish to the dumpingground within 50 metres lead. 12 Providing Un-coursed Rubble Masonry of trap / granite stones in lime mortar 1:1½, in foundation and plinth as per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″) where pointing or plastering to be done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, bailing out water, watering and all exposed masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.. 13 Providing/Re-setting Ashlar Fine Masonry of reuse-stones in lime mortar 1:1 in superstructure asperdetailedspecificationsanddrawings oras directed including the stonesshallbesetin fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course, the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 14 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with average size of stone 70 cm. x70 cm. x30cm. in superstructureas per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete.For face wallin wall 15 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with average size of stone 225 cm. x 50 cm. x 45 cm. in superstructureas per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. completeFor making Entry gate Beam 16 Carving ornamental work on surface including moulding, grove, chisseling & dresing the same part with fine finishing as per existing/similar type of work of on the stone surface of any type & size or as directed by engineer in charge etc. complete. The charges for chiseling & dressing on stone surface for ornamental carving work surface etc. as per existing design. pattern and form as directed by engineer in charge 17 Carving ornamental work including moulding, grove, clhisseling & dresing the same part with fine finishing as per existing/similar type of work of on the stone surface of any type & size or as directed by engineer in charge etc. complete. 18 Providing and laying cast in situ 1:1:4 Lime Concrete of broken brick metal for coping or waterproofing as per detailed specifications and drawings or as directed including centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate or surkhi in drum mixer, the concrete must be bitten for two days with pouring water as per specifications, scaffolding, watering and all concrete work when handed over to be perfectly clean and free from all mortar stains, etc. complete 19 Providing and fixing Stone Paving, First Sort in lime mortar 1:1, with average size of stone 60 cm. x 45 cm. x 15 cm. as per detailed specifications and drawings or as directed including all stone slabs to of approved quality, hard, even, sound, durable and uniform thickness, the stones to be very finely chisel-dressed on the surface and the course to be of prescribed width, the joints running true, the stonestobelaidwithjointsnotexceeding 6mm.(¼″)thick andtobe evenlyandfirmly bedded flush in mortar on the concrete and no hollow left, side to be dressed true and as per shape at least half the depth from the face, preparing the lime mortar in lime miller, watering and all pavingwork when handed over to be perfectly clean and free from all mortar stains etc. complete. For Pavement. 20 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 21 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. For Plum Concrete. (30% Rubble Supply) 22 Providing and grouting with lime and fine screened sand slurry in proporation of (1 : 1) with a proper jet pump pressure including cleaning and washing and packing the existing crack / holes in the brick or stone masnory with lime and finesand paste in proporation of (1:1) properly from down side, filling the slurry in cracks or holes including all necessary actions and required tools and machineries, scaffolding, curing etc. complete. 23 Gently cleaning the surface of stone masonryand piers withspecialized water misting techniques employing air water jetusing a fine nozzle sprinkling system calibrated to spray finemist along the stone surface without over wetting followed upby gentle brushing with soft nylon brushes and removing dirt,dust, bird dropping, grease. oil, algae, flingus, monkey beats,vegetable growth etc.as specified. Gentle surface cleaningmay, include using water misting and mild pH balancedsurfactants as specified for indicated areas to remove thesurfce dirt, grit accretions by means of water misting andcleaning etc. complete as directed by the Engineer in Charge.(The rate is inclusive of all materials & labours involved exceptscaffolding). 24 Providing Lime Pointing to stone work in lime mortar 1:1 in plinth, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwisespecified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sandshall not be ground fine but sand should be finer, the joints of the pointed work shall be neatlydefined by the pointing, the lines shall be regular and uniform in breadth and the joints shall beraised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple(Belfruit) per cubic metre of lime mortar as a bonding material, watering and all work whenhanded over to be perfectly clean and free from all mortar stains etc. complete 25 Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, watering including shoring and strutting etc. complete.complete. (Lift from 1.5 to 3.0 m) By Manual Means 26 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 27 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. 28 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete 29 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete 30 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,wateringand scaffolding etc. Complete 31 Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap/ granite/ quartzite/ gneiss metal for coping as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 32 ProvidingandfixinginpositionHCRM/CRS(Corrosion ResistantSteel)barreinforcementof various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns,canopies, staircase, newels,chajjas,lintelspardis,copings,fins,archesetc.asperdetailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 33 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete 34 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 35 Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint) 36 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. 37 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete 38 Providing structural steel work in hollowsection of various thickness and sizes insquare, rectanular and round shape from 25mm to 450mm section as per IS4923 YST 310 Grade produced from iron or eand blast furnace route etc.as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing inposition, making riveted/bolted/ welded connections and painting complete. 39 Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge) 40 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofingwithoutwindtiles includingfasteningwithgalvanisedironscrewsand bolts, lead and bitumenwashers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). 41 Providing and fixing Mangalore tiled roofing with class AA tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 25 mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles). 42 Providing and fixing Mangalore tile ridge and hip tiles of class AA including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. 43 Providing and laying Cast in situ/Ready Mix cement concrete in M15 oftrap/ granite/quartzite/gneissmetal for base of foundationas per dwg and directionincluding steelcentering, formwork, laying/pumping,compacting, roughening them if special finishis to be provided, finishing uneven and honey combed surface and curing etc.complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombedsurface,only. Newly laid concrete shall be covered by gunny bag, plastic,tarpaulin etc. (Wooden centeringwill not be allowed.),with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batchmix plant (Panmixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) 44 Providing and laying machine cut machine Polished Kota stone flooring 25 mm to 30 mm thickand required width in plain/ diamond pattern on bed of 1:6C.M. including cement float, filling joints with neat cement slurry curing, polishing and cleaning etc.complete. 45 Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. 46 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 47 Supplying and stacking of good earth at site including royalty andcarriage up to 1 km (earth measured in stacks will be reduced by20% for payment). 48 Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). 49 Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 4.75 mm 50 Rough dressing the trenched ground including breaking clods. 51 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. 52 Fine dressing of the ground 53 Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately). 54 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge. 55 Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately).In rows 5 cm apart in both directions 56 Providing and fixing Black stone bench Specification - black stone bench Size-48LX14W×20H With 6×6-2supports to base and 1 inserted inside stone 57 Disposing off / conveying the dismantelled materials of stone masonry/ brick masonry/ concrete/ debris/ excavated material / soil murrum / rubbish material or vegetation / grass / shrubs etc. from site to 5 Kmas directed by Engineer incharge 58 Providing and fixing board displaying in formation, suchas Name of work,Tender cost,Name of Contractor,Work completion and liability period etc,having rectangular shape of 1.20 m x 0.90m size made out 18gauge(1.25mm) thick mild steel sheet painted withone coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbolsetc.with approved colourshade paint complete,on M.S.angle of size35x35x3mm frame with properly crossbraced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angleiron posts of size 65mmx65mmx6mm,3.65m long painted with alternate black andwhite bands of 25 cm width including all fixtures etc.and fixing theboards in1:4:8concrete block of size 60 cmx 60 cmx 75 cm including, excavation, refilling,transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge
