Tender For Comprehensive Repair/Maintenance Work B/R And E/M In Md Accommodation In Area Of Age B/R-Ii Under Ge Saugor., Saugor-Madhya Pradesh

TDR : 51775925

Tender Notice
Corrigendum Details
BOQ

Expired

Saugor , Madhya Pradesh

Tender Brief : Corrigendum : Tender For Comprehensive Repair/Maintenance Work B/R And E/M In Md Accommodation In Area Of Age B/R-Ii Under Ge Saugor.

Document Fees
₹ 500 /-

EMD
₹ 50000.0 /-

Tender Value
₹ 25 Lakhs /-

Submission Date
03-11-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	27-10-2025	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	03-11-2025

Name of Work: COMPREHENSIVE REPAIR/MAINT WORK B/R AND E/M IN MD ACCN IN AREA OF AGE B/R-II UNDER GE SAUGOR

Sl. No.	Item Description
1	Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed.
2	Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed.
3	Taking down shutter of any description exceeding1.00 sqm but not exceeding 2 sqm each and removing from site complete all as specified and directed.
4	Material and labour for PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
5	M &L for Brickwork with subclass \"B\"bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etcand removel of rubbish outside of MOD land complete all as specified & directed.
6	Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
7	Supply and fixing Mild steel TMT bars (FE-500) 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.
8	Supply and fixing Mild steel TMT bars (FE-500) 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.
9	Material and labour for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc, including demolition of existing reinforced cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
10	Material and labour for joint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
11	Material and labour forjoint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm as in dado / skirting etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.
12	Material and labour for coloured anti skid ceremic tiles 7 to 8 mm thickarea of each tiles exc. 0.06 sqm and n. exc. 0.11 sqmas in floor etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
13	Material and labour for joint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
14	Material and labour forjoint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm as in dado / skirting etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.
15	Material and labour for digital glazed ceramic joint free(rectified) coloured tiles on vetical surfaces size 600x300x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 15mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.
16	Material and labour for vitrifed ceramic coloured tile, 8-9 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
17	Material and labour for vitrifed ceramic coloured tile, 8-9 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in dado / skirting, etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.
18	Material and labour for mirror polished machine cut Kota stone slab 18mm to 20 mm thick , as in flooring,laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed.
19	Material and labour formirror polished machine cut kota stone slab 12 mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing, fixed over and including 15 mm thick backing coatin CM (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed.
20	Material and labour for Granite slab of any shade( table rubbed and polished) 16 mm to18 mm thick machine cut, bedded and jointed withcementand pointed with white cement with admixture of pigment to match the shade of granite stone, laid/fixed over and including 20 mm thick screed bedCM (1:4),including cutting and polishing type as incill and jamb/skirting, steps cooking plateformsincludigrounding/ chamferring/bull nosing etc to edges of granite slabs one edge and polishing etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed.
21	Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treatedwith aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50mm thick uniformly levelled surface ofstone dust cushioning, including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement etc complete, including dismantling of existing floor tiling/stone slab/paver block with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
22	Material and labour for cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
23	Material and labour for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
24	Taking down existing cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removel of rubbish outside of MOD land complete all as specified and directed.
25	Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick / concrete surface finished even and smooth without using extra cement etc complete all as specified and directed.
26	Material and labour for rendering in two layers, first layers of 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and second layer of 5 mm thick in cement morter 1:4 with and including water proofing compound @ 3% by wt of cement etc complete all as specified and directed.
27	Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling etc complete all as specified and directed.
28	Material and labour for one coat of white wash on old decorated surface of walls including preparation of surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting etc complete all as specified and directed.
29	Material and labour for two coat of white wash on old decorated surface of walls including preparation of surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting etc complete all as specified and directed.
30	Material and labour for one coat of white wash on old decorated surface of ceiling including preparation of surface i.ebrooming down with steel wire brushes scraping downmoulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting etc complete all as specified and directed.
31	Material and labour for applying one coat of Acrylic emulsion paint on old decorated surface of walls incl preparation of surfacesi.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of paint and painted surfaces etc complete all as specified and directed.
32	Material and labour for applying two coat of Acrylic emulsion paint on old decorated surface of walls incl preparation of surfacesi.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of paint and painted surfaces etc complete all as specified and directed.
33	Material and labour for complete removal of existing treatment and applyingbirla / J. K. wall care whiteputty 1 mm thick in two layer for levelling the surfaces of walls and applying two coats of Acrylic emulsion paint over and including a coat with one coat interior primer incl. preparation of surfaces ofwalls etc complete all as specified and directed.
34	Material and labour for applying onecoat of exterior emulsion paint over and including a coat with one coat exterior primer on oldplasteredsurface ofwalls incl preparation of surfaces etc complete all as specified and directed.
35	Material and labour for one coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfacessuch as removing all splashes, drops, dirt and leaving premises in a clean state etc complete all as specified and directed.
36	Material and labour for two coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfacessuch as removing all splashes, drops, dirt and leaving premises in a clean state etc complete all as specified and directed.
37	Material and labour for one coat of synthetic enamelled paint on old painted steel/steel based surface of any desription over 10cm width or girth incl preparation surfacessuch as removing all splashes, drops, dirt and leaving premises in a clean state etc complete all as specified and directed.
38	Material and labour for Providing cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggt ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
39	Material and labour for applying three coats of white wash on new or old Ceiling surface including preparation of surface complete all as specified and directed.
40	Material and labour for applying one coats of white wash on new or old on wall surface including preparation of surface complete all as specified and directed.
41	Supply and fixing 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
42	Supply and fixing asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts but except sheets complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and taking down carefulycomplete all as specified and directed.
43	Supply and fixing 6mm thick asbestos cement serrated ridge or hip ridgefor corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof etc complete all as specified and directed.
44	Material and labour for second class hardwood in scantlings , timber clean sawn framed and fixed, including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.
45	Material and labour for 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.
46	Supply and fixing 105 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregate and including Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed.
47	Supply and fixing 125 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregate and including Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed.
48	Supply and fixing Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia300 mm long with locking arrangement, 2 Nos of tower bolt of200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size4 Nosbutt hinges including necessary cutting, welding, binding as required with and two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces, including taking down existing MS shutter with frame complete all as specifiedand as directed.Note: Single shutters of approx width 0.8 to 1.2 m andht 1.9 to 2.10 M.
49	Supply and fixing steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.
50	Supply and fixing steel window with side hung shutters without glazing bars and fixed to steel frame etc complete all as specified and directed.
51	Supply and fixing framed work such as grills gratings,sunshed cover fixed with nut bolts incl,cutting drilling holesetc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290Gde E 165, including dismentaling of old MS work complete all as specified and directed.
52	Supply and fixing fixed type ventilators aluminium powder coated of frame size 50.80mmX 25.40mm, half portion will be fixedwith 3.5 mm thick frosted glass and half portion will be fixed with louvers with 5mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm), aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.20 mm.
53	Supply and fixing aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 91.50 X 31 mm,sideand top of size min 91.50X29.70, shutters vertical 39X18 mm,shutter top &bottom of size min 18X31.92 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 3.5 mm thick tintedglass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.20 mm.
54	Supply and fixing 35mm thick 2nd class HWfactory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasonedandchemically pressure treated, for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.
55	Supply and fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.
56	Supply and fixing 2nd class HW factory made glazed and skeleton shutters 35 mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.
57	Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be moulded with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification etc complete all as specified and directed.
58	Supply and fixing factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face &5mm prelam PVC sheet on back face, supplying & fixing in frame at site etc complete all as specified and directed.
59	Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
60	Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc, including taking out existing wire cloth with beading complete all as specified and directed.
61	Supply and fixing 18 mm thick marine plywoodinterior grade with 1 mm thick white mica lamination on one side and 1 mm thick coloured mica on another side fixed in as cubboard shutter and kitchen cabinet etc complete, including dismantling existing boarding any description complete all as specified and directed.
62	Supply and fixing external teak wood lipping, 6 mm thick, fixed with nails for 18/19mm thick plywood including necessary prepartion and polishing etc and including removing old beads complete all as specified and directed.
63	Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over and including a coat of red oxide primer etc complete all as specified and directed.
64	Supply and fixingAluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed.
65	Supply and fixingAluminium handles 100mm size, cast type, anodised complete all as specified and directed.
66	Supply and fixing 100mmButt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.
67	Supply and fixing Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.
68	Supply and fixing Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
69	Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
70	Supply and fixing Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed.
71	Supply and fixing door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed.
72	Supply and fixing 150 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
73	Material and labour for PCC 1:3:6type C-1 using 20mm graded stone aggregates as in filling of hold fast etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.
74	Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortarfor inserting holdfasts in exc. One brick but not exc. two brick walland making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TypeB-1 as required complete all as specified and directed.
75	Hacking out old broken glass (any thickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beadscomplete all as specified and directed.
76	Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
77	Supply and fixing 3 mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
78	Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or laid in trenches including ms clamps etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed.
79	Supply and fixing PVC (SWR) bends 110 mm dia etc complete, including taking out existing bends etc complete all as specified and directed.
80	Supply and fixing PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequal etc complete, including taking out existing T/Y etc complete all as specified and directed.
81	Supply and fixing PVC(SWR) vent cowl of 110mm dia etc complete, including taking out existing cowl etc complete all as specified and directed.
82	Supply and fixingPVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors/wall etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed.
83	Supply and fixingPVC (SWR) bends 75mm dia etc complete, including taking out existing bends etc complete all as specified and directed.
84	Supply and fixing PVC(SWR) vent cowl of 75mm dia etc complete, including taking out existing cowl etc complete all as specified and directed.
85	Supply and fixing 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete, including taking out existing floor trap etc complete all as specified and directed.
86	Supply and fixing 25mm dia stainless steelcurtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs etc complete, including taking down existing curtain rod with brackets etc complete all as specified and directed.
87	Supply and fixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 15 mm diaGI tubing with fitting etc complete all as specified and directed.
88	Supply and fixingGI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 20 mm diaGI tubing with fitting etc complete all as specified and directed.
89	Taking down existing 15 mm diaGI tubing and connectionand refixing old15mm GI tubing with new fitting after cleaning in new or old position ( wall, floor, wall etc ) etc complete all as specified and directed.
90	Taking down existing 20 mm diaGI tubing and connectionand refixing old20 mm GI tubing with new fitting after cleaning in new or old position ( wall, floor, wall etc ) etc complete all as specified and directed.
91	Cutting and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector)15 /20 mm pipe etc complete all as specified and directed.
92	Supply and fixing PVC float valve assembly including assessories with float valve 20mm dia etc complete, including taking out existing float valve assembly complete all as specified and directed.
93	Supply and fixing soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete, including taking out existing soap dish complete all as specified and directed.
94	Supply and fixing Wash hand basin mixture 15mm bore cast copper alloy,with capstan heads, chromium plated, screwd down high pressure, withlettered \"hot\" or \"cold\" with long screwed shanks and fly-nuts, screwed for iron pipes and fixed etc complete, including taking out existing mixer etc complete all as specified and directed.
95	Supply and fixing CP hot & cold waterwall mixure unit with arrangement for overhead shower andwith hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe etc complete, including taking out existing mixer etc complete all as specified and directed.
96	Supply and fixing2 way bib cock with single knob15mm dia chromium plated, cast copper alloy etc complete, including taking out existing bib tap etc complete all as specified and directed.
97	Supply and fixing health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc complete, including taking out existing Faucet etc complete all as specified and directed.
98	Supply and fixing C P bib taps, cast copper alloyfancy concealedtype with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed etc complete, including taking out existing bib tap etc complete all as specified and directed.
99	Supply and fixed angular stopvalve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe etc complete, including taking out existing angle cock/stop valve etc complete all as specified and directed.
100	Supply and fixing 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union etc complete, including taking out existing shower rose etc complete all as specified and directed.
101	Supply and fixing gun metal globe /gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore etc complete, including taking out existing gate valve etc complete all as specified and directed.
102	Supply and fixing bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 90gm) etc complete, including taking out existing bib tap etc complete all as specified and directed.
103	Supply and fixing pillar taps, fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed etc complete, including taking out existing pillar tap etc complete all as specified and directed.
104	Supply and fixing mild steel Chromium plated grating 100 mm dia complete, including taking out existing grating etc complete all as specified and directed.
105	Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete, including taking out existing towel rail etc complete all as specified and directed.
106	Supply and fixing in renewal vitreous china WHB white flat back size 550x400mm including Supply and fixing angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long as required high pressure complete all as specified and directed.
107	Supply and fixing in renewal vitreous china squatting pan \"Orrisa pattern\" size 580x440mmwhitewith integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etccomplete all as specified and directed.
108	Supply and fixing in renewal Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover & fixing bolts, excluding flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe complete all as specified and directed.
109	Supply and fixing Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap etc complete, including taking out existing bottle trap etc complete all as specified and directed.
110	Supply and fixing Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union & CP waste coupling etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm etc complete, including taking out existing sink with bracket etc complete all as specified and directed.
111	Supply and fixing PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket, flush pipe & bend complete of capacity 10 litres etc complete, including taking out existing flushing cistern etc complete all as specified and directed.
112	Supply and fixing Tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screwsetc complete, including taking out existing Tolilet paper holder any type etc complete all as specified and directed.
113	Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long etc complete, including taking out existing Sheet glass shelf assembly etc complete all as specified and directed.
114	Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed.
115	Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed.
116	Material and labour for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed.
117	Material and labour for cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and from mouth of circulating pipes, etc including disconnecting, reconnecting & refixing water tanks in position complete all as specified and directed.
118	Supply and fixing PVC tank covers suitable for 500/1000 ltr capacity water storage tank etc complete, including taking out existingtank cover etc complete all as specified and directed.
119	Supply and fixing Bevelled edge looking mirror of size 600x450 selected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer etc complete, including taking out existing looking mirror etc complete all as specified and directed.
120	Material and labour for treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(b) Material and labour for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with and including water proofing compound at the rate of 3% of weight of cement and finishing the surface even and smooth without using extra cement.(c) Material and labour for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (d) Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion).(e) Material and labour for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with and including WPC @ 3% of weight of cement, as sub base, 75mm thick on top. Note :- Above quoted rate includes-(a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated.(c) Horizontalflat area to be measured.
121	Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed.
122	Material and labour for surface point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
123	Material and labour for surface point wiring for one Call Bell point controlled by one push button switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
124	Material and labour for surface point wiring for 5Amp independent socket point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
125	Material and labour for surface point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
126	Material and labour for surface power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
127	Material and labour for concealed point wiring for one light or fanpoint controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
128	Material and labour for concealed point wiring for onecall bell point controlled by one push button switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
129	Material and labour for concealed point wiring for one5 Amp independent socket point controlled by one switchwith 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
130	Material and labour for concealed point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
131	Material and labour for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc.of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
132	Supply and fixing Modular switch, one way, 6 Amp 230 volts, 1 module complete all as specified and directed .
133	Supply and fixing socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed .
134	Supply and fixing switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed .
135	Supply and fixing socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed .
136	Supply and fixing modular fan step regulator 60-80W2 module complete all as specified and directed.
137	Supply and fixing modular bell push 6A ,1 module complete all as specified and directed.
138	Supply and fixing switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.
139	Supply and fixing socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.
140	Supply and fixing switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.
141	Supply and fixingsocket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V complete all as specified and directed.
142	Supply and fixing ceiling rose, surface backlite,three terminal complete all as specified and directed.
143	Supply and fixing lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.
144	Supply and fixing bell ding dong 230 V, single phase complete all as specified and directed.
145	Supply and fixing electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.
146	Supply and fixing bell push flush type one way 5Amp 240 Volt complete all as specified and directed.
147	Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of01 Single core of size4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green etc complete, including taking down old unserviceable sub main wiring with casing-caping/conduit complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length.
148	Supply and fixing testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed.
149	Supply and fixing testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed.
150	Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 100-160Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
151	Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 100-160Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.
152	Supply and fixing TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.
153	Supply and fixingbox type LED optic fitting10/9 Watt2 feet box type complete all as specified and directed.
154	Supply and fixing LED bulb 10 watt B22 Base suitable for angle / batten holder fitting complete all as specified and directed.
155	Supply and fixing socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, switch socket combination complete all as specified and directed.

Also Visit

Tenders

Madhya Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Comprehensive Repair/Maintenance Work B/R And E/M In Md Accommodation In Area Of Age B/R-Ii Under Ge Saugor., Saugor-Madhya Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Comprehensive Repair/Maintenance Work B/R And E/M In Md Accommodation In Area Of Age B/R-Ii Under Ge Saugor., Saugor-Madhya Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us