Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-11-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-11-2025 |
| 2 | 27-10-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-11-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking downshutters of any description exc 1 Sqm but not exc. 2 Sqm each including removing from site complete all as specified and directed. |
| 4 | Material and labour for second class hardwood plain, solid, straight chowkhat and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints,complete all as specified and directed. |
| 5 | Material and labour for30mm thick flush shutters, solid core construction with block board core & plywood face panels, commercial type on both sidescomplete all as specified and directed. |
| 6 | Material and labour for 35mm thick second class hardwoodglazed & skelton shutters open rebated and prepared to receive glass or gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads rebated for securing glass etc; sizes of members of shutters as specified in SSR Part - 1, Section 8, clause 8.24 ( a ) complete all as specified and directed. |
| 7 | Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 8 | Supply and fixing steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 9 | Supply and fixing Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted, orforged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 10 | Supply and fixing3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed. |
| 11 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete,including hacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads etc complete all as specified and directed. |
| 12 | Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 13 | Supply and fixingStainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc, including taking out existing wire cloth with beading complete all as specified and directed. |
| 14 | Supply and fixing factory made PVC doorof size 50mmx47mm with wall thickness of 5 mm made out of extended 5 mm prelam PVC sheet cut at corner and jointed with 2 Nos, 150 mm long brackets of size 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubbergasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frameby using PVCfastners(Minimum of 04 Nos of screws to be provided foreach vertical number and minimum 02 Nos for horizontal member) complete all as specified and directed. |
| 15 | Supply and fixing factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 5mm thick moulded prelam PVC sheet on the front face & 5mm thick prelam sheet on back face complete all as specified and directed. |
| 16 | Material and labour for vitrifed ceramic tile, light shade 8-10 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 17 | Material and labour for vitrifed ceramic tile, light shade 8-10 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in dado / skirting, etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 18 | Material and labour for non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 19 | Material and labour for non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm as in dado / skirting etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 20 | Material and labour for coloured anti skid ceremic tiles 7 to 8 mm thickarea of each tiles exc. 0.06 sqm and n. exc. 0.11 sqmas in floor etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 21 | Material and labour for non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 22 | Material and labourfor glazed ceramic joint free coloured tiles on vetical surfaces size 450x300x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 23 | Material and labourfor glazed ceramic joint free coloured tiles on vetical surfaces size 600x300x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 24 | Material and labour for mirror polished machine cut Kota stone slab flooring 16-18 mm thick size not less than 550mmX550 mm laid over and including 20 mm thick screed bed in CM(1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc complete, including dismantling of existing floor/wall tiling or kota stone with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 25 | Material and labour for Kota stone slab 12mm to15 mm thick in skirting, laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing etc complete, including dismantling of existing floor/wall tiling or kota stone with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 26 | Material and labour for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed by Engineer-in-charge. |
| 27 | Material and labour for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregates) in foundations, filling and mass concrete, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed by Engineer-in-charge. |
| 28 | Material and labour for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mmx595mm,fixed or laid/inserted to powder coatedGI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 4mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long etc, including dismantling ofexisting any type or ceiling boards in thickness incl cover fillets complete all as specified and directed. |
| 29 | Material and labour for 18 mm to 20 mm thick Granite slabof any shade( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelvesin steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:4) including pointing in white/colourcement 1:2 using marble dust with admixture of pigment to match shade of the slabslaid bedded and pointed in any mortor etc complete, including dismantling of existing floor/wall tiling or kota stone with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 30 | Material and labour for treatement for sunken portion is as follows :- A. Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.B. Material and labour for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with and including water proofing compound at the rate of 3% by weight of cement and finishing the surface even and smooth without using extra cement in the following sequence:- (a) Material and labour for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (b)Material and labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) etc.(c) Material and labour for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with and including WPC @ 3% by wt. of cement, as sub base, 75mm thick on top. Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measered. |
| 31 | Material and labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates as in bed blocks for hold fast etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed by Engineer-in-charge. |
| 32 | Supply and fixing MSbutt hinges 100 mm size medium weight, coled rolledand fixed with screws complete all as specified and directed. |
| 33 | Supply and fixing MSbutt hinges 125 mm size medium weight, coled rolledand fixed with screws complete all as specified and directed. |
| 34 | Supply and fixing Stainless steel butt hinges 100 mm and fixed with screws complete all as specified and directed. |
| 35 | Supply and fixing200mm size Aluminium anodisedbarrel tower bolt of extruded section andfixed with screwscomplete all as specified and directed. |
| 36 | Supply and fixing extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified and directed. |
| 37 | Supply and fixing 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed. |
| 38 | Supply and fixing mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 39 | Material and labour for brick work with sub class \"B\"old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. |
| 40 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even etc complete all as specified and directed. |
| 41 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished the surface fair and even etc complete all as specified and directed. |
| 42 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removed of rubbish off the premises complete all as specified & directed. |
| 43 | Material and labour for rendering 10 mm thick on ceilingin cement mortar (1:3), finished the surfaces fair and even etc complete all as specified and directed. |
| 44 | Material and labour for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proofpaint over and including one coat of exterior wall primer incl. of walls etc complete all as specified and directed. |
| 45 | Material and labour for prepration of new wall surfaces & applyingbirla / J. K. wall care whiteputty 2 mm thick in two layers for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsionpaint over and including a coat of interior wallprimer incl. preparation of surfaces ofwalls etc complete all as specified and directed. |
| 46 | Material and labour for applying three coats of white wash on newly plastered ceilingsurfaces including preparation of these surfaces complete all as specified and directed. |
| 47 | Material and labour for complete removal of existing treatment from walls andapplying2mm thick Birla/J K wall care whiteputty in two layers on walls and applying two coat of interior Acrylic emulsion paint over and including a coat of wallprimer complete all as specified and directed. |
| 48 | Material and labour for prepration of old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 49 | Material and labour for75 mm thick PCC 1:3:6, C1 (20mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed by Engineer-in-charge. |
| 50 | Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed. |
| 51 | Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed. |
| 52 | Supply and fixing 20mm dia bore Gun metal, Globe orgate valves, with iron head or lever screwed both ends for iron pipe etc complete, including taking out existing gate valve etc complete all as specified and directed. |
| 53 | Supply and fixing 15mm Galvanised Mild steeltubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors etc complete, including taking up or down existing 15 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 54 | Supply and fixing 20mm Galvanised Mild steeltubing medium grade galvanisedwith all fittings and fixed complete to walls and ceilings or laid in floors etc complete, including taking up or down existing 20 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 55 | Supply and fixingPVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete, including taking out existing flushing cistern etc complete all as specified and directed. |
| 56 | Supply and fixing in renewal vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified and directed. |
| 57 | Supply and fixing in renewal vitreous China wash down water closet (pedestal pattern) white (excludingflushing cistern and flush pipe) with and including White Seat cover complete all as specified and directed. |
| 58 | Supply and fixing in renewal vitreousChina wall mounted /floor mounted Water closet complete all as specified and directed.Make:- Parryware Cascade Nxt Popular series Cat Nos, C0208,C0758, C2054, C8300, C8017 or equivalent as mentioned in Appendix \"C\") |
| 59 | Supply and fixing in renewal vitreous China WHB white flat back size 550x400mm with andincluding Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified and directed. |
| 60 | Supply and fixing sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Couplingand down take waste piple ; including bedding in cement mortar 1:4 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mmbowl size 410mm x 330mm x 160mm etc complete, including taking out existing sink with bracket etc complete all as specified and directed. |
| 61 | Supply and fixing sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Couplingand down take waste piple ; including bedding in cement mortar 1:4 on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete, including taking out existing sink with bracket etc complete all as specified and directed. |
| 62 | Supply and fixing bevelled edge looking mirror of size 600mmx450mmselected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer etc complete, including taking out existing looking mirror etc complete all as specified and directed. |
| 63 | Supply and fixing tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges etc complete, including taking out existing towel rail etc complete all as specified and directed. |
| 64 | Supply and fixing 25 mm bore MS powder coated conduit curtain rods, suitablefor door/ widows curtain with fancy type powder coated mild steel dooms with stainless brackets fitted to each endandfixed to wall, including taking down existing curtain rod with brackets etc complete all as specified and directed. |
| 65 | Supply and fixing bib taps, cast copper alloychromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixedetc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 66 | Supply and fixing angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore etc complete, including taking out existing angle valve etc complete all as specified and directed. |
| 67 | Supply and fixing brass chromium plated wallmixer for mixing Hot & Cold water with arrangement of head shower and incuding hand shower, high pressure, screwed down for 15mm bore iron pipe etc complete, including taking out existing mixer etc complete all as specified and directed. |
| 68 | Supply and fixing brass chromium platedWHBmixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe etc complete, including taking out existing mixer etc complete all as specified and directed. |
| 69 | Supply and fixing Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm etc complete, including taking out existing shower (Health faucet) etc complete all as specified and directed. |
| 70 | Supply and fixing Multi bib tap 2 in 1 , cast copper alloy chromium platedfency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed etc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 71 | Supply and fixing PVC connections 15mm bore size 450mm in length with both endbrass high quality nuts etc complete, including taking out existing PVC connections etc complete all as specified and directed. |
| 72 | Supply and fixing brass chromium plated shower rose fancy type, as approved , with or without swivel joints, including fixing to steel pipe fixed etc complete, including taking out existing shower rose etc complete all as specified and directed. |
| 73 | Supply and fixing 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 74 | Supply and fixing PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete, including taking out existing PVC pipe with fittingetc complete all as specified and directed. |
| 75 | Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointedlaid in trenches or in floors etc complete, including taking out existing PVC pipe with fittingetc complete all as specified and directed. |
| 76 | Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointedandfixed to walls etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 77 | Supply and fixing PVC (SWR) bends 110 mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 78 | Supply and fixing PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequalwith acess door etc complete, including taking out existing T etc complete all as specified and directed. |
| 79 | Supply and fixing PVC (SWR) bends 75 mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 80 | Supply and fixing 75 mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete, including taking out existing floor trap etc complete all as specified and directed. |
| 81 | Supply and fixing concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipeetc complete, including taking out existing stop valve etc complete all as specified and directed. |
| 82 | Supply and fixing 18/19 mm thick pre laminated paticle board, as in cupboards, shelves, pelmets etc exterior grade, pre laminatedone side decoraded choice lamination and other side balancing whitelamination cut to required size and fixed to frame and corner finish with wooden beads and including polishing of wooden beads helves , kitchen cupboards etc complete, including taking down existing board etc complete all as specified and directed. |
| 83 | Supply and fixing18/19 mm thick Block board grade 2 interior grade ,commercial type , fixed with screw to timber frame work including 0.9 mmdecorative laminate type1 of surface finish,colour and pattern as approved and fixed with approved adhesive as per manufacturers instruction using as shelves , kitchen cupboards etc complete, including taking down existing board etc complete all as specified and directed. |
| 84 | Supply and fixing Continuous (piano) hinges, Width of flaps (when open)- 30mm mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 85 | Supply and fixing 100mm longHasp and Staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified & directed. |
| 86 | Supply and fixingball catches magnet type , with striking plate including complete all as specified and directed. |
| 87 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 88 | Material and labour Preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide primer of surfaces over 10cm width or girth complete all as specified and directed. |
| 89 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 90 | Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in sectionframed/unframed complete all as specified and directed. |
| 91 | Supply and fixing pre- coated coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at endfixed with self tapping screws complete, including dismantling of existing Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. |
| 92 | Supply and fixing 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete, including dismantling of existing Asbestos cement sheets complete all as specified and directed. |
| 93 | Supply and fixing structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 94 | Supply and fixingstructural steel work as inroof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. complete all as specified and directed. |
| 95 | Supply and fixing MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed. |
| 96 | Material and labour forPCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etcon roof top as a leveling course / paddingto maintainthe slope,finished the surfaces even and smooth without using extra cement etc complete all as specified and directed. |
| 97 | Taking out of oldroof treatment of any description including mud phushka, lime, concrete, tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete and provn of water proofing roof treatment with material and labour to RCC roof with approved modified membrane of weighing not less than 3kg/sqm and thickness of membrane not less than 3.00mm comprising with following items and all as specified.(i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut as specified and directed.(ii) Material and labour for rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab complete all as specified and directed.(iii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing treatment of weight not less than 3 Kg / sqm and thickness of membrane not less than 3.00mm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqmover the membrane.(vii) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site.(viii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including Material and labour for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site as directed by Engineer In Charge. |
| 98 | Taking out of oldroof treatment of any description including mud phushka, lime, concrete, tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete and provn of water proofing roof treatment with material and labour to RCC roof with approved modified membrane of weighing not less than 3kg/sqm and thickness of membrane not less than 3.00mm comprising with following items and all as specified.(i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut as specified and directed.(ii) Material and labour for rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab complete all as specified and directed.(iii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing treatment of weight not less than 3 Kg / sqm and thickness of membrane not less than 3.00mm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqmover the membrane.(vii) Material and labour for cool roof tiles 8mm to 10mm thick 300mmX 300mm in size white/ plain in colour conforming to sun reflective Index (SRI) value minimum of 70-80laid over and including 15mm thick 1:3 Screed bed fixed with 3 mm spacers and jointsshall be filled with epoxy grout complete all as specified and directed.(viii)A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including Material and labour for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site as directed by Engineer In Charge. |
| 99 | Material and labour applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC, concrete panels, plastered surface of wall etc. over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and directed. Make: Dr Fixit (Raincoat) or equivalent as mentioned in Appendix \"C\" |
| 100 | Material and labour for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in Cement -mortor 1 : 6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. |
| 101 | Material and labour for two coat of cement plaster on stone masonary surfaces or surfaces other than fair faces of brick work,first coat 10mm thick in cement mortar (1:6) and second coat cement plaster 10 mm thick in cement mortar (1:4) with and including WPC @ 3% by wt of cement, finished the surface fair and even complete all as specified and directed. |
| 102 | Material and labour for grinding and polishingmirror finish of existing kota stone slab flooring complete all as specified and directed. |
| 103 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 104 | Material and labour for surface point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 105 | Material and labour for surface point wiring for one Call Bell point controlled by one push button switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 106 | Material and labour for surface point wiring for 5Amp independent socket point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 107 | Material and labour for surface point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 108 | Material and labour for surface power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 109 | Material and labour for concealed point wiring for one light or fanpoint controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 110 | Material and labour for concealed point wiring for onecall bell point controlled by one push button switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 111 | Material and labour for concealed point wiring for one5 Amp independent socket point controlled by one switchwith 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 112 | Material and labour for concealed point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 113 | Material and labour for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc.of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 114 | Supply and fixing Modular switch, one way, 6 Amp 230 volts, 1 module complete all as specified and directed . |
| 115 | Supply and fixing socket Modular 6 Amp-2/3 pin 230 volts, combined 2 module complete all as specified and directed . |
| 116 | Supply and fixing switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed . |
| 117 | Supply and fixing socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed . |
| 118 | Supply and fixing modular fan step regulator 120W2 module complete all as specified and directed. |
| 119 | Supply and fixing modular bell push 6A ,1 module complete all as specified and directed. |
| 120 | Supply and fixing switch piano type flush, single pole, one way 5 A 230 Volts complete all as specified and directed. |
| 121 | Supply and fixing socket outlet, 5 pin, 5 Amp, flush type, 230 Volts complete all as specified and directed. |
| 122 | Supply and fixing switch piano type flush, single pole, one way 15 A 230 Volts complete all as specified and directed. |
| 123 | Supply and fixingsocket outlet2 in 1,6 pin, 5/15 A, flush piano type240 Volts complete all as specified and directed. |
| 124 | Supply and fixing ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 125 | Supply and fixing lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 126 | Supply and fixing lbell ding dong 230 Volts, single phase complete all as specified and directed. |
| 127 | Supply and fixing electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed. |
| 128 | Supply and fixing bell push flush type one way 5Amp 240 Volt complete all as specified and directed. |
| 129 | Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of01 Single core of size4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green, incl. taking down old unserviceable sub main wiring complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length. |
| 130 | Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of01 Single core of size6 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green, incl. taking down old unserviceable sub main wiring complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 6.00 sqmm for main current and one run of single core of size6.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length. |
| 131 | Supply and fixing testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed. |
| 132 | Supply and fixing testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed. |
| 133 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 Volts with 200 Amps rated bus bar of suitable size, including taking down existing DBcomplete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 134 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 4 way, 240 Volts with 200 Amps rated bus bar of suitable size, including taking down existing DBcomplete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 135 | Supply and fixing LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. |
| 136 | Supply and fixing TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. |
| 137 | Supply and fixing box type LED optic fitting10/9 Watt2 feet box type complete all as specified and directed. |
| 138 | Supply and fixing LED bulb 10 watt B22 Base suitable for angle / batten holder fitting complete all as specified and directed. |
| 139 | Supply and fixing Modular AC box enclosure with socket plug top and MCB SP 25 Amps 240 volts, 10 KA capacity flush mounting enclosure, including taking down existing AC Boxcomplete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
