Estimate For The Cost Of Extension Of Vannanthura P&C At Vannanthura In Chinnar Wildlife Sanctuary During 2025-2026, Idukki-Kerala

Estimate for the cost of Extension of Vannanthura P&C at Vannanthura in Chinnar Wildlife Sanctuary during 2025-2026 -1.001 2.8.1Earth work in excavation by mechanical means (Hydraulic excavator) /manual meansin foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift up to 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m.All kinds of soil 1.002 60.7.1DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonrywith good quality blasted rubble including packing to compactness to lines and levelscost and conveyance of all materials labour charges etc. complete as per direction ofDepartmental officers at site 1.003 5.1.3Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size derived from natural sources) 1.004 5.9.2Centering and shuttering including strutting, etc. and removal of form for:Walls (anythickness) including attached pilasters, butteresses, plinth and string courses etc. 1.005 5.22.1Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelMild steel and Medium Tensilesteel bars 1.006 10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses10.16.1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses 1.007 4.1.10Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5coarse sand (zone-III) derived from natural sources : 10 gradedstone aggregate 40 mm nominal size derived from natural sources) 1.008 26.49.1Providing and fixing in position factory made EPS cement sandwich wall/roof/floor light weight solid core panels made of core material of EPS granule balls/beads (conforming to IS 4671:1984 and shall have density not less than 15kgper cum) adhesive, cement, sand, flyash and other bonding material in mortarstate processed to form in a preset mould. The outer face on both sides of thepanels will be non asbestos fiber cement board confirming to IS 14862:2000 orCalcium silicate board confirming to EN 14306:2009 of 5mm thick each. Panelshall be laid on 6mm thick cement mortar (1 cement: 2 fine sand) mixed withchemical adhesive of 0.5kg per 50kg of cement or shall be preferably fixed intoC channel made of 1.2mm thick MS plate screwed/fastenened to the slab/column/beam etc. The panel shall fixed vertically with tongue and groove jointand horizontally locked with steel bar between each other and floors and filledwith cement mortar and adhesive. Panels should be used as floor & roofingwith additional structural support, steel or RCC depending upon the design.All the operation shall be completed in all respect as per drawings,Manufacturers specifications and under the overall direction of Engineer-inCharge(Cost of all the material is included except C channel which will bepaid seperately).Non load bearing panels 50mm thick of required size 1.009 12.51.1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm(+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet andpolyester top coat 15-18 microns using self drilling/ self tapping screwscomplete:Ridges plain (500-600 mm) 1.01 14.40.2Providing and fixing chromium plated brass butt hinges with necessary chromiumplated brass screws etc. complete.100x70x4 mm (ordinary type) 1.011 50.9.15.2Supplying and fixing 300 mm Aluminium aldrop 1.012 9.63.1Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barreltype) with necessary screws etc. complete : (Copper oxidized as per IS : 1378)250x10mm 1.013 21.3.2Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 5.50mm thickness (weight not less than 12.50 kg/sqm)

INR 888 /-

INR 4.44 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB