|
| 1 | Excavation for foundation in earth, soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area and all lifts stacking and spreading as directed, dewatering, shoring, structing andpreparing the bed for the foundation and necessary back filling, ramming, watering (Including shoring and strutting) etc. complete. (Lift Upto 3.00 Metre) Spec. No. : Bd.A 1 Page No.259 (S.S.R 2020-21 Item No 21.01 ) |
| 2 | Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with sand/grit ramming, watering complete. Additional Item Spec.No. : As directed by Engineer in charge.(S.S.R. 2020-21 Item.No. 21.40 ) |
| 3 | Providing and laying in situ cement concrete M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compacting and curing complete. with fully automatic micro prosessor based PLC with SCADA enabled reversible Drum Type Mixer, with natural sand.Spec.No. : Bd.E.1 Page No.287 (S.S.R. 2020-21 Item.No. 24.01) |
| 4 | Providing and laying in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for Reinforced Cement Concrete work in foundation like raft, grillage, strip foundation and footings of Reinforced Cement Concrete columns and steel stanchion etc. including bailing out water, formwork, cover blocks, compaction and curing roughening the surface if special finish is to be provided(Excluding steel reinforcement and Structural steel) complete, with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.3 Page No.298 and B. 7, Page No.38(S.S.R.2020-21 Item.No.25.11 ) |
| 5 | Providing and casting in situ cement concrete M-20 of trap / granite/ quartzite / gneiss metal for R.C.C Columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, compacting and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement ) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.5 Page No.300(S.S.R.2020-21 Item.No.25.31 ) |
| 6 | Providing and Casting in situ cement concrete of M 20trap / granite/ quartzite / gneiss metal for R.C.C. beams & lintel as per detailed designs and drawings or as directed including centering , formwork, cover blocks, compaction and roughening the surface if special finish is to be provided and curing complete. ( Excluding Reinforcement) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.6 a Page No.300 (S.S.R.2020-21 Item.No.25.50 ) |
| 7 | Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete.Spec.No. : Bd.G.I. Page No.313.(S.S.R.2020-21 Item.No.27.01 |
| 8 | Filling in plinth and floors with approved excavated materials in 15 cm to 20cm. layers including watering and compaction complete. Spec.No. : Bd.A.10 Page No.262(S.S.R.2020-21 Item.No.21.37 |
| 9 | Providing second class Burnt Brick masonry with conventional / Indian standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. Spec.No. : Bd.G.5 Page No.315 (S.S.R.2020-21 Item.No.27.05 ) |
| 10 | Providing and fixing steel frame doorof angle 50x50x5 mmwith 16mmdia.mild steelbarshorizontallyat10cmc/c for ventilator portionincludingiron holdfastforthe fixing shutters including welding, painting, finishing etc. complete.( S.S.R 2020-21 Item No 39.36 ) |
| 11 | Providing and fixing steel frameof angle40x40x5 mmsizefor windowswith 16mmdia.mild steelbars horizontally at 10cmc/c for ventilator portionand 15cmc/c for remaining portionwith M.S.flatof size 40x6mm vertical at center including iron hold fast boxes for fixing 40x6mm vertical at center including ironhold fast boxes forfixing shutters including welding finishing painting etc. complete.(S.S.R 2020-21 Item No 39.34 ) |
| 12 | Providing and fixing in position mild steel door and window shutter including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 24 gauge including electrosatatic powder coating etc complete (S.S.R 2020-21Item No.__________) |
| 13 | Providing and casting in situ cement concrete M-20 of trap / granite/ quartzite / gneiss metal for R.C.C.Chajja as per detailed drawings and designsincludingcentering, formwork, cover blocks, compacting & roughening thesurfaceif special finish is to be provided and curing complete. (Excluding steel reinforcement) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.9 Page No.303. (S.S.R.2020-21 Item.No.26.05 ) |
| 14 | Providing and casting in situ cement concrete M-20of rap / granite/ quartzite / gneiss metal for R.C.C.Slabs and landings canopy, waist slab as per detailed drawings and designsincludingcentering, formwork, cover blocks, compactiong and roughening the surface if special finish is to be provided and curing complete.(Excludingreinforcement ). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.8 Page No.302 (S.S.R.2020-21 Item.No.25.70) |
| 15 | Providing and fixing In position TMT - FE - 500 bar reinforcement of varies diameters for R.C.C. pile caps, footing, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required complete.Spec.No. : Bd.F.17 Page No.306. (S.S.R.2020-21 Item.No.26.33) |
| 16 | Providing internal cement plaster 6mm. thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete.Spec.No. : Bd.L.4 Page No.368(S.S.R.2020-21 Item.No.32.01) |
| 17 | Providing internal cement plaster 12mm. thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete.Spec.No. : Bd.L.4 Page No.368(S.S.R.2020-21 Item.No.32.03) |
| 18 | Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Spec.No. : Bd.L.7 Page No.367.(S.S.R.2020-21 Item.No.32.11) |
| 19 | Providingfine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc complete. (S.S.R. 2020-21 Item No 32.21) |
| 20 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain / diamond pattern on a bed of 1:6 C.M including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc (S.S.R. 2020-21 Item No 33.03) |
| 21 | Providing and applying White - wash in two coats on old / new plasted surfaces or masonary surface asbestos cement sheets including including scaffoldingand preparing the surface by brushing and brooming down etc. Spec. No. : Bd.O.8 Page No.406 (S.S.R.2020-21Item.No.36.03) |
| 22 | Providing and applying Washable Oil bond destemper of approvedcolour and shede to old/new surface in two coatsincluding scaffolding preparing the surface (excluding primer coat) complete. Spec.No. : Bd.P.6 Page No.414. (S.S.R.2020-21 Item.No.36.11) |
| 23 | Providing and applying two coats of water proof cement paint of approved matufacture and approved colour to the plasted surfaces including scaffolding if necessary, cleaning and preparing the surface watering for two days complete.Spec. No. : Bd.O.8 Page No.406 (S.S.R.2020-21 Item.No.35.13) |
| 24 | Providing and applying twocoat of lead / zinc base oil paint / bituminious paint of approved colour to on old / new structural steel work and iron work in building including scaffolding if necessary, cleaning and preparing the surface etc complete (excluding primer coat ). Spec. No. : Abd.P.1 Page No. 411.(S.S.R.2020-21 Item.No. 35.04) |
| 25 | add royalty charges |
| 26 | Testing Charges |
| 27 | AddLabour Insr. |
| 28 | Add G.S.T charges |
