Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-10-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-11-2025 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame)not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description exceeding1.00 sqm but not exceeding 2 sqm each and removing from site complete all as specified and directed. |
| 4 | M &L for Brickwork with subclass \"B\"bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etcand removel of rubbish outside of MOD land complete all as specified & directed. |
| 5 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 6 | Supply and fixing Mild steel TMT bars (FE-500) 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 7 | Supply and fixing Mild steel TMT bars (FE-500) 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed. |
| 8 | Material and labour for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc, including demolition of existing reinforced cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 9 | Supply and fixing Steel rolling shutters (laths 1.25 mm thick), with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 10 | Material and labour for joint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 11 | Material and labour forjoint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm as in dado / skirting etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 12 | Material and labour for coloured anti skid ceremic tiles 7 to 8 mm thickarea of each tiles exc. 0.06 sqm and n. exc. 0.11 sqmas in floor etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 13 | Material and labour for joint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 14 | Material and labour forjoint free non skid ceramic colouredtiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm as in dado / skirting etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 15 | Material and labour for digital glazed ceramic joint free(rectified) coloured tiles on vetical surfaces size 600x300x7mm thick etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 15mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 16 | Material and labour for vitrifed ceramic coloured tile, 8-9 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in floors etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 17 | Material and labour for vitrifed ceramic coloured tile, 8-9 mm thick (square/rectangular) polishedarea of each tile n exc.0.36 sqm as in dado / skirting, etc, set and jointedin neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed. |
| 18 | Material and labour for mirror polished machine cut Kota stone slab 18mm to 20 mm thick , as in flooring,laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 19 | Material and labour formirror polished machine cut kota stone slab 12 mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing, fixed over and including 15 mm thick backing coatin CM (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 20 | Material and labour for Granite slab of any shade( table rubbed and polished) 16 mm to18 mm thick machine cut, bedded and jointed withcementand pointed with white cement with admixture of pigment to match the shade of granite stone, laid/fixed over and including 20 mm thick screed bedCM (1:4),including cutting and polishing type as incill and jamb/skirting, steps cooking plateformsincludigrounding/ chamferring/bull nosing etc to edges of granite slabs one edge and polishing etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 21 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treatedwith aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50mm thick uniformly levelled surface ofstone dust cushioning, including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement etc complete, including dismantling of existing floor tiling/stone slab/paver block with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed. |
| 22 | Material and labour for cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 23 | Material and labour for 25mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles etc, including demolition of existing PCC in any thickness and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 24 | Material and labour for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 25 | Taking down existing cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removel of rubbish outside of MOD land complete all as specified and directed. |
| 26 | Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick / concrete surface finished even and smooth without using extra cement etc complete all as specified and directed. |
| 27 | Material and labour for rendering in two layers, first layers of 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and second layer of 5 mm thick in cement morter 1:4 with and including water proofing compound @ 3% by wt of cement etc complete all as specified and directed. |
| 28 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling etc complete all as specified and directed. |
| 29 | Material and labour for Providing cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggt ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed. |
| 30 | Material and labour for applying three coats of white wash on new or old Ceiling surface including preparation of surface complete all as specified and directed. |
| 31 | Material and labour for applying one coats of white wash on new or old on wall surface including preparation of surface complete all as specified and directed. |
| 32 | Material and labour for applying two coats of white wash on new or old on wall surface including preparation of surface complete all as specified and directed. |
| 33 | Supply and fixing GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.50 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including Supply and fixing colouredNon Asbestos designer ceiling cement boards 4 mm thick etc, including dismantling ofexisting false ceiling any type or ceiling boards in any thickness with frame incl cover fillets complete all as specified and directed. |
| 34 | Supply and fixing 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 35 | Supply and fixing asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts but except sheets complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and taking down carefulycomplete all as specified and directed. |
| 36 | Supply and fixing 6mm thick asbestos cement serrated ridge or hip ridgefor corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof etc complete all as specified and directed. |
| 37 | Supply and fixing 105 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregate and including Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed. |
| 38 | Supply and fixing 125 mm X 60 mm sizepressed steel frames for door with one or morerebatesincluding necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxideprimer including cutting holes and making goodin P:C:C1.2.4 type B-1 using 20 mm graded stone aggregate and including Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed. |
| 39 | Supply and fixing fixed type ventilators aluminium powder coated of frame size 50.80mmX 25.40mm, 1.3 mm thick half portion will be fixedwith 3.5 mm thick frosted glass and half portion will be fixed with louvers with 3.5mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm), aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion onlyincluding necessarycutting holes on wall and fixing arrangements and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.30 mm. |
| 40 | Supply and fixing glazed (5.0 mm thick plain /coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm &lock rail size is 100 x 44.45x 2mm & style of door shutter is 85mmx 44.45 x 2mmwith handles 2 Nos in each door , hinges has fitted on frame as requiredfixed with rubber gasket & aluminum beading any No of panels with aluminum handle ,locking arrangemen,floor door stopperincl. necessary joining cleats , glazing clips and floor springsetc confirming to IS complete all as specified and directed. |
| 41 | Supply and fixing aluminium windowssliding type three track powder coated consisting of frame bottom with gutter of sizemin 91.50 X 31 mm,sideand top of size min 91.504X29.70, shutters vertical 39X18 mm,shutter top &bottom of size min 18X31.92 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 3.5 mm thick tintedglass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etcincluding necessarycutting holes on wall and floor and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.20 mm. |
| 42 | Supply and fixing 35mm thick 2nd class HWfactory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasonedandchemically pressure treated, for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed. |
| 43 | Supply and fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed. |
| 44 | Supply and fixing 2nd class HW factory made glazed and skeleton shutters 35 mm thickopen rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed. |
| 45 | Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be moulded with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification etc complete all as specified and directed. |
| 46 | Supply and fixing factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face &5mm prelam PVC sheet on back face, supplying & fixing in frame at site etc complete all as specified and directed. |
| 47 | Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 48 | Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc, including taking out existing wire cloth with beading complete all as specified and directed. |
| 49 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over and including a coat of red oxide primer etc complete all as specified and directed. |
| 50 | Supply and fixingAluminium, anodised, barrel tower bolts 100mm long of extruded section complete all as specified and directed. |
| 51 | Supply and fixingAluminium handles 100mm size, cast type, anodised complete all as specified and directed. |
| 52 | Supply and fixing 100mmButt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 53 | Supply and fixing Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed. |
| 54 | Supply and fixing Aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 55 | Supply and fixing Aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 56 | Supply and fixing Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 57 | Supply and fixing door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed. |
| 58 | Supply and fixing 150 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 59 | Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortarfor inserting holdfasts in exc. One brick but not exc. two brick walland making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TypeB-1 as required complete all as specified and directed. |
| 60 | Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete, including hacking out old broken glass (any thickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beadscomplete all as specified and directed. |
| 61 | Supply and fixing 3 mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete, including hacking out old broken glass (any thickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beadscomplete all as specified and directed. |
| 62 | Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or laid in trenches including ms clamps etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 63 | Supply and fixing PVC (SWR) bends 110 mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 64 | Supply and fixing PVC (SWR) 110 mm diajunction, single(single \"T\")equal or unequal etc complete, including taking out existing T/Y etc complete all as specified and directed. |
| 65 | Supply and fixing PVC(SWR) vent cowl of 110mm dia etc complete, including taking out existing cowl etc complete all as specified and directed. |
| 66 | Supply and fixingPVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors/wall etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed. |
| 67 | Supply and fixingPVC (SWR) bends 75mm dia etc complete, including taking out existing bends etc complete all as specified and directed. |
| 68 | Supply and fixing 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete, including taking out existing floor trap etc complete all as specified and directed. |
| 69 | Supply and fixing 25mm dia stainless steelcurtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs etc complete, including taking down existing curtain rod with brackets etc complete all as specified and directed. |
| 70 | Supply and fixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 15 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 71 | Supply and fixingGI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 20 mm diaGI tubing with fitting etc complete all as specified and directed. |
| 72 | Cutting and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector)15 /20 mm pipe etc complete all as specified and directed. |
| 73 | Supply and fixing PVC float valve assembly including assessories with float valve 20mm dia etc complete, including taking out existing float valve assembly complete all as specified and directed. |
| 74 | Supply and fixing soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete, including taking out existing soap dish complete all as specified and directed. |
| 75 | Supply and fixing Wash hand basin mixture 15mm bore cast copper alloy,with capstan heads, chromium plated, screwd down high pressure, withlettered \"hot\" or \"cold\" with long screwed shanks and fly-nuts, screwed for iron pipes and fixed etc complete, including taking out existing mixer etc complete all as specified and directed. |
| 76 | Supply and fixing CP hot & cold waterwall mixure unit with arrangement for overhead shower andwith hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe etc complete, including taking out existing mixer etc complete all as specified and directed. |
| 77 | Supply and fixing2 way bib cock with single knob15mm dia chromium plated, cast copper alloy etc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 78 | Supply and fixing health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc complete, including taking out existing Faucet etc complete all as specified and directed. |
| 79 | Supply and fixing C P bib taps, cast copper alloyfancy concealedtype with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed etc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 80 | Supply and fixed angular stopvalve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe etc complete, including taking out existing angle cock/stop valve etc complete all as specified and directed. |
| 81 | Supply and fixing 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union etc complete, including taking out existing shower rose etc complete all as specified and directed. |
| 82 | Supply and fixing gun metal globe /gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore etc complete, including taking out existing gate valve etc complete all as specified and directed. |
| 83 | Supply and fixing bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 90gm) etc complete, including taking out existing bib tap etc complete all as specified and directed. |
| 84 | Supply and fixing pillar taps, fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed etc complete, including taking out existing pillar tap etc complete all as specified and directed. |
| 85 | Supply and fixing mild steel Chromium plated grating 100 mm dia complete, including taking out existing grating etc complete all as specified and directed. |
| 86 | Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete, including taking out existing towel rail etc complete all as specified and directed. |
| 87 | Supply and fixing in renewal vitreous china WHB white flat back size 550x400mm including Supply and fixing angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long as required high pressure complete all as specified and directed. |
| 88 | Supply and fixing in renewal vitreous china squatting pan \"Orrisa pattern\" size 580x440mmwhitewith integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etccomplete all as specified and directed. |
| 89 | Supply and fixing in renewal Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover & fixing bolts, excluding flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe complete all as specified and directed. |
| 90 | Supply and fixing Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap etc complete, including taking out existing bottle trap etc complete all as specified and directed. |
| 91 | Supply and fixingVitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including flush pipe and waste pipe etc complete, including taking out existing urinal etc complete all as specified and directed. |
| 92 | Supply and fixing PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket, flush pipe & bend complete of capacity 10 litres etc complete, including taking out existing flushing cistern etc complete all as specified and directed. |
| 93 | Supply and fixing Tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screwsetc complete, including taking out existing Tolilet paper holder any type etc complete all as specified and directed. |
| 94 | Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long etc complete, including taking out existing Sheet glass shelf assembly etc complete all as specified and directed. |
| 95 | Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed. |
| 96 | Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed. |
| 97 | Supply and fixing Bevelled edge looking mirror of size 600x450 selected quality glass mounted6mm thick AC building board or commercial plywood andfixed to wooden plug with chromium plated screws and cup washer etc complete, including taking out existing looking mirror etc complete all as specified and directed. |
| 98 | Material and labour forPCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etcon roof top as a leveling course / paddingto maintainthe slope,finished the surfaces even and smooth without using extra cement etc complete all as specified and directed. |
| 99 | Taking out of oldroof treatment of any description including mud phushka, lime, concrete, tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete and provn of water proofing roof treatment with material and labour to RCC roof with approved modified membrane of weighing not less than 3kg/sqm and thickness of membrane not less than 3.00mm comprising with following items and all as specified.(i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut as specified and directed.(ii) Material and labour for rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% of weight of cement applied over roof slab complete all as specified and directed.(iii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm.(v) Laying of water proofing treatment of weight not less than 3 Kg / sqm and thickness of membrane not less than 3.00mm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applyingone coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqmover the membrane.(vii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including Material and labour for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site as directed by Engineer In Charge.(viii) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site. |
| 100 | Disconnecting PVC / AC / RCCexisting water tankof exc. 250 and not exc. 500 lit capacity , setting a side for repair , cleaning and removing all scale and dirts from tanks and from mouths of circulating pipesand hoisting if required reconnecting and refixing in position etcincluding writing of date of cleaning with synthetic enamel paint complete all as specified and directed. |
| 101 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 102 | Material and labour for surface point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 103 | Material and labour for surface point wiring for one Call Bell point controlled by one push button switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 104 | Material and labour for surface point wiring for 5Amp independent socket point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 105 | Material and labour for surface point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 106 | Material and labour for surface power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 107 | Material and labour for concealed point wiring for one light or fanpoint controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 108 | Material and labour for concealed point wiring for onecall bell point controlled by one push button switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 109 | Material and labour for concealed point wiring for one5 Amp independent socket point controlled by one switchwith 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc. of External diameter 20mmall as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 110 | Material and labour for concealed point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge .Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 111 | Material and labour for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit,includingmodular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows,etc.of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green complete all as specified and as directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 112 | Supply and fixing Modular switch, one way, 6 Amp 230 volts, 1 module complete all as specified and directed . |
| 113 | Supply and fixing socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed . |
| 114 | Supply and fixing switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed . |
| 115 | Supply and fixing socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed . |
| 116 | Supply and fixing modular fan step regulator 60-80W2 module complete all as specified and directed. |
| 117 | Supply and fixing modular bell push 6A ,1 module complete all as specified and directed. |
| 118 | Supply and fixing switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed. |
| 119 | Supply and fixing socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed. |
| 120 | Supply and fixing switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed. |
| 121 | Supply and fixingsocket outlet2 in 1,6 pin, 5/15 A, flush piano type240 V complete all as specified and directed. |
| 122 | Supply and fixing ceiling rose, surface backlite,three terminal complete all as specified and directed. |
| 123 | Supply and fixing lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 124 | Supply and fixing bell ding dong 230 V, single phase complete all as specified and directed. |
| 125 | Supply and fixing electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed. |
| 126 | Supply and fixing bell push flush type one way 5Amp 240 Volt complete all as specified and directed. |
| 127 | Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of01 Single core of size4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green etc complete, including taking down old unserviceable sub main wiring with casing-caping/conduit complete all as specified and as directed.Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.(ii)Two runs of single core of size 4.00 sqmm for main current and one run of single core of size4.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length. |
| 128 | Supply and fixing testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed. |
| 129 | Supply and fixing testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed. |
| 130 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 100-160Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 131 | Supply and fixing sheet metal enclosureDB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 100-160Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed.Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. |
| 132 | Supply and fixing LED Bulk head 13/10 watt designed for modern homes available in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. |
| 133 | Supply and fixing TL fitting 20watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. |
| 134 | Supply and fixingbox type LED optic fitting10/9 Watt2 feet box type complete all as specified and directed. |
| 135 | Supply and fixing LED bulb 10 watt B22 Base suitable for angle / batten holder fitting complete all as specified and directed. |
| 136 | Supply and fixing socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, switch socket combination complete all as specified and directed. |
| 137 | Taking out old unserviceable laminated sheet and Supply and fixing new laminated super hylem sheet of size 8\" x 5\" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 138 | Taking out old unserviceable laminated sheet and Supply and fixing new laminated super hylem sheet of size 5\" x 5\" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 139 | Taking out old unserviceable laminated sheet and Supply and fixing new laminated super hylem sheet of size 8\" x 10\" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 140 | Taking out old unserviceable laminated sheet and Supply and fixing new laminated super hylem sheet of size 8\" x 12\" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 141 | Taking out old unserviceable laminated sheet and Supply and fixing new laminated super hylem sheet of size 9\" x 11\" white colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed. |
| 142 | Supply and fixing PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site, including taking out old conduit complete all as specified and directed. |
| 143 | Supply and fixing PVC casing caping of size 1\" x 1/2\" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site, including taking out old casing caping complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
