Construction Of Naibat Office Wachi Shopianc- 1 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres All kinds of soil. 2 Providing and laying stone soling hand packed including spreading ,watering and maintaining levelIncluding cost of material involved complete. 3 Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: Including cost of material involved complete. 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. 6 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Including cost of material involved complete. 7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 8 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth levelupto floor V-Level Including cost and carriage of material involved complete. 9 Centering and Shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of columns etc. for mass concrete. 10 Centering and Shuttering including strutting, propping etc and removal of form for lintel beams, plinth beams, girders, bressumers and cantilevers. 11 Centering and shuttering including strutting, propping etc. and removal of form for: suspended floors, roofs landings balconies and acess platforms 12 Supplying and filling of RBM inside rooms including spreading, watering Including cost of material involved complete. 13 Cement Concrete Flooring in 1:2:4 (1 Cement : 2 Coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate. 14 Providing wood work in frames of doors, windows , clerestory windows and other frames ,wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia and length . Imported kail wood. 15 Providing and fixing panelled or panelled glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm thick. Imported kail wood. 16 Providing and fixingGlass Panes 4mm thick (weighing not less than 10kg/sqm) of complete job including Beadings, Nails etc. 17 Providing and fixing 12 mm thick prelaminated particle board woth decorated lamination on both sides all complete as per directions of Engineer incharge. 18 Providing and fixing of almunium hardware fittings of approved quality. 19 Tower bolt 100mm x 10mm 20 Tower bolt 150mm x 10mm 21 Handles 150mm 22 Handles 100mm 23 L Drop with locking system 24 Providing and fixing of M.S Hold fasts 50 cm long (40 x 5mm) embedded in cement concrete Including cost of material involved complete. 25 Cement Plaster ( in fine sand) 12mm cement plaster of mix 1:6 (1 cement: 6 fine sand) internal 26 Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick 27 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work including Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) 28 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement with white etc. In colours shades except White, Ivory, Fume Red Brown. 29 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 30 Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approvedsteel primer all complete. Welded. 31 Providing coloured corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm thick with zinc coating not less than 275 gram/m2 of required shade and colour as per engineer incharge including soffits and eaves boarding all complete. 32 Providing ridges or hips of width 60 cm over all width plain G.S sheets fixed with polymer coated J or L hooks.bolts and nuts 8mm dia G.I. limpet and bitumen washers complete 0.50 mm thick with zinc coating not less than 275 gram/m2 33 Providing valleys of 90cm wide overall in plain G.S. sheets fixedwith polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.00 mm thick with zinc coating not less than 275 gram/m2 34 DRAINAGE DISPOSAL SYSTEM 35 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: 36 Providing and laying stone soling hand packed including spreading ,watering and maintaining level Including cost of material involved complete. 37 Providing and laying in position specified grade including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)Including cost of material involved complete. 38 Providing and laying in position specified grade including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. 39 Dry random masonry with quarry stone in foundation and plinth using bond stone Including cost of material involved complete. 40 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)Including cost of material involved complete. 41 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 42 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth levelupto floor V-Level Including cost of material involved complete. 43 12 mm cement plaster on the rough side of single or half brick wall with a floating coat of neat cement of mix 1:6 (1 cement : 6 fine sand)Including cost of material involved complete. 44 Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms 45 Providing and fixing Type B PVC (Prince Make) pipe incl. cost of rubber washer and adhesive complete as per directions of engineer incharge 46 100 mm dia 47 75 mm dia 48 Providing and fixing P.V.C. (Prince make ) following fittings including cost of rubber washer , adhesive complete as per directions of Engineer incharge. 49 Door Tee 100mm size 50 Door Tee 75mm size 51 PVC Collar 100mm 52 PVC Reducer 100x 75mm 53 Plain bend 100mm size 54 Plain bend 75mm size 55 PVC Clamps (100/75mm) 56 PVC Cowl 75mm size (100/75mm) 57 Door bend 100mm 58 Door bend75mm 59 Floor Trap 100mm size 60 Floor Trap 75mm size 61 Construction of 9 thick brick masonary manholes in cement mortar (1:4) mix , foundation cementconcrete ( 1:4:8) ,12 mm thick inside cement plaster with finishing ,making channels in cement concrete (1:2:4). including cost of manhole cover PVC ISI mark with frame size (1-6x 1-6x1-6) inside size. 62 Providing and fixing of C I Man hole cover with frame of angkle iron of size 450 mm x 450 mm of approved quality and make complete. 63 SANITARY AND PLUMBING ITEMS 64 Providing and placing in terrace PVC storage tank with cover and suitable locking arrangement including making necessary holes for inlet, outlet and overflow pipes incl. all fittings complete 65 Providing and fixing three layers PPR pipes confirming to IS: 15801, UV stabilized and anti-microbial fussion welded having thermal stability for hot and cold water supply including all ppr plain and brass threaded polypropylene random fitting.This includes testing of joints complete as the direction of Engineer Incharge (15mm dia Nominal bore) 66 Providing and fixing three layers PPR pipes confirming to IS: 15801, UV stabilized and anti-microbial fussion welded having thermal stability for hot and cold water supply including all ppr plain and brass threaded polypropylene random fitting.This includes testing of joints complete as the direction of Engineer Incharge (20mm dia Nominal bore). 67 Providing and fixing G.I. pipes complete with G.I fittings excluding trenching and refilling etc ( external work) medium.15 mm dia Nominal Bore 68 Providing and fixing G.I. pipes complete with G.I fittings excluding trenching and refilling etc ( external work) medium. 20 mm dia Nominal Bore 69 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. 70 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron Por Strap, 10 liter low level white PVC. flushing cistern, including flush pipe (of approved make ) with manually controlled device (hand lelever) conforming to IS:7231, with a llfitting sand fixtures complete, including cutting and making good the wall sand floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 71 Providing and fixing health faucet of standard quality and make including all fixtures. 72 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete. 73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 74 Providing and fixing following CP fittings of standard quality and approved make including all fixtures needed to make them functional etc complete job as per directions of Engineer Incharge. 75 Bib Cock 76 Angle Valve 77 Wall Mixer 78 Basin Mixer 79 Soap Case 80 Toilet Paper Holder 81 Gratting 82 Ball Valve 83 Connection Pipes 84 Carriage of materials by mechanical transport including loading,unloading and stacking. 85 Sand average lead of 20km 86 Stone aggregate 20mm average lead of 15 km 87 Quary stone for an average lead of 40km
