Tender For Construction Of 06 additional class room At Ps Fresnard Anantnag- 1 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:: All kinds of soil : 2 Supply and layingof Stone soling ,room filling hand packed broken stonesin layers including carriage by MT& HL of 300mcomplete job. 3 Providing and laying in position cement concrete. All works upto plinth level 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) crushed includingcarriages by MT avg lead 40 km & HL of 300m to the site of work complete job. 4 roviding and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level , 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) includingcarriages by MT avg lead 40 km & HL of 300m to the site of work complete job. 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) includingcarriages by MT avg lead 40 km & HL of 300m to the site of work complete job. 6 Brick work class designation 75 in foundation and plinth in cement mortar 1:4 ( 1 cement: 4 coarse sand)Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level includingcarriages by MT avg lead 50 km & HL of 300m to the site of work complete job. 7 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)includingcarriages by MT avg lead 40 km & HL of 300m to the site of workcomplete job. 8 Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars 9 Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 10 Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. 11 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms. 12 Providing wood work in frames of door windows clestory windows and other frame wrought framed and fixed in position with hold flat lugs or with dash fastever of required diameter and length (holdfast lugs or dash fastens shall be paid seperately,importedwood i/c all carriage complete. 13 Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separate. First class imported wood 14 Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.. First class imported wood 15 Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windowsusing 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws.First class imported wood 16 Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of Rate for thickness of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm shutters in mm persqmfor doors, windows and clerestory windows with ISI marked M.S. pressed butt 35mm 30mm hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :First class imported wood 17 Providing & fixing 3.5 mm thick glass panes(weighing not less than 10 kg/sqm) with all fixtures, all complete 18 Providing 40x4 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). 19 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete :300x16 mm 20 P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job 150 mm 21 P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job 100 mm 22 P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job 150×10 mm 23 P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job 100×10 mm 24 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture i/c priming coat of wood primerOn wood work 25 12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc includingcarriages complete job 26 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) includingcarriages by MT avg lead 40 kmcomplete job 27 Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete 28 Finishing walls with acrylic smooth exterior paint of required shade onNew work (Two or more coats applied @ 1.67 liter/10sqm over andincluding priming coat of exterior primer applied @ 2.20kg/10sqm) 29 Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade on New work (two or more coats) overand including priming coat with water thinnable cement primer 30 Structural steel work in welded built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 31 Providing & fixingPrecoated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and selftapping fasteners of reputed make withpurlin sheet using self drilling and self tapping fastners & Fixingflashings, valleys and ridges of colour coated galvalume plain sheetusing self drilling and selftapping fasteners of reputed makel complete and as directed.The contractor shall give a minimum of 10 years guarantee for sheets against deterioration, disintegrations loss of luster, variation in colour, etc. and leakages across laps, fasteners etc. All types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-in-Charge. Fasterners shall also be load tested. The Contractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation(including cost of all material, leads, lifts and carriages etc upto site of work complete). 32 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laidon 20 mm thick bed of cement mortar 1: 4( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown 33 Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillarslaid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarsesand) and jointed with grey cement slurry mixed with pigment to matchthe shade of the slabs, including rubbing, polishing and curing complete 34 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, 35 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete 36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 37 Providing and fixingCeramic glazed floor tiles (anti-skid) 30cmx30cm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as white, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc., complet 38 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 39 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. 40 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.40 mm 41 Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes plain bends, door bends, sockets, rubber ring, jointing, junctions, clean out plug , cowls, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating,trap of self cleansing design .etc. complete including jointing.75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay/Prince Pipes) 42 Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes plain bends, door bends, sockets, rubber ring, jointing, junctions, clean out plug , cowls, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating,trap of self cleansing design .etc. complete including jointing.110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B(Astral/Supreme/Ajay /prince Pipes) 43 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 25 mm OD(SDR-7.4) 44 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. PN-16 pipe , 32 mm OD(SDR-7.4) 45 Providing and fixing ball valve (brass) of approved quality of required dia 46 Providing fixing in position polyethylene septic tank type b ( comfort or equivalent) having capacity for 20 uses 47`` x51``x119`` inches in size including excavation of put as per the size, laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 course sand : 8 graded Nos stone agg 20mm nominal size ) filling the septic tank with fresh water , connecting the inlet and outlet the septic and filling the dry course of sand and bajre around the septic tank complete job including the carriage of all materials involved. 47 Providing and fixing PPR Unions PPR union 25 mm 48 Providing and fixing PPR Unions PPR union 32 mm 49 Providing and fixing PPR Ts PPR25 mm 50 Providing and fixing PPR Ts PPR32 mm 51 Providing and fixing C.P brasslong bib cock of approved quality. (Jaquar or Equivalent as Per Make List), 15mm nominal bore 52 Providing and fixing C.P brass Shortbib cock of approved quality. (Jaquar or Equivalent as Per Make List), 15mm nominal bore 53 Providing and fixing Pvc Water Storage tank of approved brand including Ball Cock with all necessary fittings and fixtures complete job 54 Providing and Fixing of CP Angle Valve of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge.Complete job 55 Constructing masonry Chamber 30x30x30 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand)with necessary pvc cover with frame or cover slab in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay (non modular) bricks of class designation 7.5 56 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wall wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm 57 Providing and fixing of geysers of approved make and brand ( Racold, Havells,Jaquar or of approved quality as per directions of Engineer Incharge) incl all fixtures compete job. 58 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 18 mm thick 59 Providing and fixing of Centre hole basin mixer for wash basin of Jaquar,Kerovit or of approved quality as per directions of Engineer Incharge.Complete job 60 The estimated rates are exclusive of 18% GST. However the GST @18% shall be paid on gross amount excluding labour cess proportionately.
