Tender For Construction Of Room And Veranda In Government Higher Secondary School, Dudhwali Dhani; 1. Excavation of soil to a depth of 1.5 m in the foundation, trench, or drain, compacting the bottom, watering, tamping the sides, removing the excavated soil, refilling the voids after filling the foundation, and disposing of the remaining soil up to a distance of 50 m. 2. In cement concrete foundations or floors, fill 40 mm nominal stone aggregate (crusher broken)/brick aggregate with cement-sand mortar in the ratio of 1:1 cement: 5:1 sand: 10:1 soil, and compacting, including tamping. 3. Foundation and plinth masonry with first-class brickwork in a cement-gravel mortar of 1:6 or 1:8, including sealing the side gaps and tamping. 4. Additional amount for masonry work in the superstructure up to a height of 4.5 m from the plinth level. 5 Additional amount for making square or rectangular brick pillars, up to a maximum length of 1.2 metres in the superstructure. 6. Installation of centering/shuttering (plank and sills) for RCC roofs, slabs, balconies, lintels, etc. up to 4.5 meters in height and removal, etc., as per specifications. 7. Supply and pouring of reinforced cement concrete of 1:2:4/1:1.5:3 mix, including scaffolding, including burying, compaction, and leveling of the surface with 1:3 cement mortar for roof slabs, balconies, beams, lintels, etc., but the cost of steel and shuttering is separate. 8. Cutting, bending, positioning, and fastening of iron for RCC work, including supply. 9. Laying of first-grade dry slab brick flooring on a 12 mm thick mud mortar, filling the joints with mud and then filling with flat tip cement 1:3. 10. Cement Plastering of walls using cement and gravel in a 1:6 ratio, including caulking the joints and regular watering for 14 days. 11 Supply and installation of a 22-gauge plain GI sheet door in a 25x25x3mm conical iron frame in a 40x40x3mm angle iron frame, including fittings such as sliding bolts, latches, and locking strips. 12 A 22-gauge plain GI sheet window, including the entire frame and frame of 25x25x3mm conical iron, a 10mm grill with latches, two latches, and four strips. 13 Supply and installation of a 14-mesh, 24-gauge iron mesh in an iron window, and 20x3mm beading. Attach with beading and tighten with screws. 14 Apply enamel paint in three layers to give an even shade. Creating an even surface on new or old work. 15 Earthwork: Digging a pit along the road, lifting 1.5 meters of soil and transporting it up to 50 meters, breaking up lumps, laying it in 25 cm layers, tamping, leveling, and creating a camber. 16 Transporting soil for various distances, including loading, unloading, and stacking. (Transport length should be calculated from the nearest route, not by road.) 17 Laying 110 mm diameter PVC pipe along with other necessary materials. 18 Finishing with putty for a smooth surface. 19 Finishing with color emulsion paint in more than two or more coats. 20 Light point fittings with fan box and fan rod.
