|
| 1 | Sch \"A\" |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 3 | M&L rendering 15mm thick on walls as well as on sunken floor in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed.Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule. |
| 4 | M&L forcement concrete 1:5:10,type E-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and massconcrete complete all as specified and directed. |
| 5 | Dismantling brick tiles or terracing tiles, single layers on roof complete all as specified and directed. |
| 6 | Demolition of mud phuska in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 7 | M&L cleaning surfaces and applying a coat of bitumen primer @ 0.30 lit per Sqm complete all as specified and directed. |
| 8 | M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced applicationcomplete all as specified and directed. |
| 9 | M&L 40 mm thick brick tiles laid on 15 mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as specified and directed. |
| 10 | All as per item No 08 above but except tile complete all as specified and directed (Old bricks shall be reused). |
| 11 | M&L 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with water proofing compound on roof slab and finishing the surface even and smooth without using extra cementcomplete all as specified & directed. Note : Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule. |
| 12 | M&L forPlain cement concrete 1:2:4, type B1 using 20mm graded crushed stone aggregate average thickness 50mm as in roof padding including mixing water proofing compound complete all as specified and directed.Note.Water proofing liquid shall be measured and paid seperately. |
| 13 | Supply only Iiquid water proofing compound ISI marked as approved complete all as specified and directed. |
| 14 | M&L for providing, cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 15 | Material & Labour for PolyUrethane Coating based waterproofing and heat reflecting system having following key performance properties:(a) UV resistant and resistant to yellowing and weathering(b) Highly elastic and crack bridging(c) Non-toxic and VOC compliant water based coating(d) One component ready to use(e) Excellent adhesion on porous and non porous substrates(f) Seamless waterproofing membrane (g) Water vapour permeableNote : The installation company of roofing system should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the roofing manufacturer can only be used with official approval from manufacturer.Procedure : Providing and applying primer over the prepared surface with Homeshield PU ROOFKOT or Equivalent as approved. First coat:Material : Water = 1:1 by weightTotal thickness: ̴̴ 0.4 – 0.5 mmConsumption: 0.25 kg/sqm.Reinforcement: Glass fiber meshSecond coat: Homeshield PU ROOFKOT or Equivalent as approved.Consumption : 0.5 kg/sqm.Third coat: Homeshield PU ROOFKOT or Equivalent as approved.Consumption: 0.5 kg/sqm. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L forNon - skidceramiccoloured tiles7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 18 | All as per item No 16 above but for work on vertical surfaces such as skirting risers to steps etc. over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 19 | M&L forglazedceramiccoloured tiles in vertical surface300x450x7mm thick, set & jointed in neat cement slurry and pointed in whiteor coloured cement to match the colour of tiles overand including 10 mmthick rendering in cement mortar 1:4 complete all as specified and directed. |
| 20 | Taking down steel water tubing of 15 mm bore including connection and S&F Mild steel GI tubing 15 mm bore medium weight fixed to walls and floor complete all as specified and directed. |
| 21 | Taking down steel water tubing of 20 mm bore including connection and S&F Mild steel GI tubing 20 mm bore medium weight fixed to walls and floor complete all as specified and directed. |
| 22 | Taking down steel water tubing of 40 mm bore including connection and S&F Mild steel GI tubing 40 mm bore medium weight fixed to walls and floor complete all as specified and directed. |
| 23 | S&F in repairs vitreous China wash basin, white or in matching colour of tiles , flat back, size 550x450 mmexcluding taps,but including 32 mm dia waste coupling chromium plated brass and PVC waste pipe 750 mm long( Minimum), chain and plug and porcelain stopper,brackets for fixingany size, including cutting for and pinning in ends of brackets or erecting standfixed in repairs complete all as specified and directed. |
| 24 | S&F in repairs Pillar taps, cast copper alloy 15 mm bore, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed. |
| 25 | S&F in repairs Vitreous China squatting pan orissa pattern size 580 x 440 mm white with integral foot rests including connection to trap and to flushing pipe complete all as specified and directed. |
| 26 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) white including connection to trap and to flushing pipe complete all as specified and directed. |
| 27 | S&F in repairs 10 ltrs capacityPVCsyphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets, fush pipe of polythylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 28 | S&F in repairs PVC connection 15 mm diawith PTMT nuts of length 450 mm complete all as specified and directed. |
| 29 | S&F in repairs Bib cock 15mm bore with flange, chrome plated fancy type fixedin repair complete all as specified and directed. |
| 30 | S&F in repairs Angular/ stop cock 15mm bore with wall flange chrome plated fancy type, fixedin repairs complete all as specified and directed. |
| 31 | S&F in repairs Concealed stop cock, 15mm bore chromium plated fancy typelong shank and cup complete all as specified and directed. |
| 32 | S&F chromium platedfancy type shower rose with arm 125 mm size including fixing to steel pipe or union complete all as specified and directed. |
| 33 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 34 | S&F in repairs Grating doom 125mm dia of PTMT (Minimum weight 40gms) complete all as specified and directed. |
| 35 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 36 | S&F in repairs waste coupling PTMT 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed. |
| 37 | All as per item No 35 above but 40mm dia complete all as specified and directed. |
| 38 | S&F in repairs 32 mm bore PVC waste pipe suitable for WHB or Sinks etccomplete all as specified and directed. |
| 39 | S&F in repairs 40 mm bore PVC waste pipe suitable for WHB or Sinks etc complete all as specified and directed. |
| 40 | S&F in repairs tubular towel rail brass chromium plated 20mm dia complete all as specified and directed. |
| 41 | S&F in repairs soap dish of chromium plated brass screw fixed to wall complete all as specified and directed. |
| 42 | Taking down chowkat with shutter (without takingoff shutter from frame) n exc 1.5 sqm each complete all as specified and directed. |
| 43 | S&F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in operating as per specifications given in SSR 2020 (Part-II) complete all as specified and directed. |
| 44 | S&F Factory made solid pannel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rail.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail , lock railand bottom rail on either side and as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rail with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing to frame at site as per specification complete all as specified and directed. |
| 45 | S&Fmild steel, cold rolled, medium weightbutt hinges 100 mm, fixed with screws to wooden frames or fixed with welding to iron frames complete all as specified and directed. |
| 46 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed of size150 mm long complete all as specified and directed. |
| 47 | S&F Aluminium handle Extruded aluminium alloy handles fabricated type anodised of size150 mm long complete all as specified and directed. |
| 48 | Dismantling water tanks of capacity 250 to 500 ltr and removing to store and S&F rotational moulded polythylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable complete all as specified and directed. |
| 49 | Dismantling of cast iron drain pipe 75/100 mm diajointed in cement mortar or lead and taking out of trenches, if required complete all as specified and directed. |
| 50 | S&F PVC (SWR) 75 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 51 | S&F PVC (SWR) 110 mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 52 | M&L 75mm dia PVC (SWR)floor trap, plain withgrating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 53 | S&F PVC 75 mm (SWR) bends any radius complete all as specified and directed. |
| 54 | S&F PVC 110mm \"P\" Trap complete all as specified and directed. |
| 55 | Taking down cement plaster on brick wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed. |
| 56 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair complete on external surfaces including applyng two coats of cement base paintccomplete all as specified and directed. |
| 57 | M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement including M&L for preparation of new plastered surfacesof walls of any descriptionandapplyingtwo coats of distempering of wallwith distemper oil emulison (any tint)complete all as specified and directed. |
| 58 | Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 59 | M&L for RCC (Nominal Mix) type B-I, 1:2:4 (using 20 mm graded crushed stone aggregate) as in roofs, beams, staircases, landing, chajjas, RCC chulha/chimany and similar suspended work complete all as specified and directed. |
| 60 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 61 | Demolition ofbrickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 62 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc. 6 m mean radius built in CM 1:4 complete all as specified and directed. |
| 63 | M&L75 mm thick PCC 1:2:4, typeB-2 ( using 40mm graded crushed stone aggregate) finished surface even and smooth as in floor in alternate panel complete all as specfied and directed. |
