Tender For Construction Work Of E-Library On The First Floor Of The Office Of Nagar Panchayat Iltifatganj - R.C.C work with cement approved course sand and 2 cm {3/4) gauge approved stone ballast in the proportion of 1:1.5:3 in beams above plinth leveland including neccessary centering and shuttering etc. and also including supply of all materials,labours and T & P etc. required for proper completion of the work. Binding wire cost being included in the item As SOR Chp-5 SCH PWD 289 2 R.C.C work with cement approved course sand and 2 cm {3/4) gauge approved stone ballast in the proportion of 1:1.5:3 Slabs excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G. G.I. binding wire and including neccessary centering and shuttering etc. and also including supply of all materials,labours and T & P etc. required for proper completion of the work. Binding wire cost being included in the item 3 Mild steel or iron work in plain work such as RCC or RB work (when not included in an over all rates) wroughttorequired shape as necessary including bending for proper completion of the work and including supply of allsteelanditswastage and over laping and hooks As per SOR Chp-10 SCH PWD item No 504 4 First class Brick work in 1:4 in cement and Coarse sand Mortor in Superstructure including supply of all matterials, Labour and T&P etc required for proper completion of the work As per SOR Chp-6 SCH PWD 305(b)+309 5 12 mm cement plaster in single coat on fair side of single or half brick wall for Internal/exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded anglesnotexceeding80mmingirthandfinished evenandsmoothnoextraformixinganyadditive. 1cement : 6 Coarse sand. As per SOR Chp 13 SCH PWD Item No 586(a) 6 Providing and laying Ceramic glazed Wall tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sgm includingpointing the joints with white cement and matching pigment etc., complete. As per DSR 2023 Chp-11 Item 11.38 7 Providing and laying Vitrified tiles in floor in 600x600 mm size specified by the manufacturer) with water absorption less than 0.08% and conforming to 1S:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.As per DSR 2023 item No 11.41A2.1 8 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). For Skirting including As Per DSR Chp-11 Item No.11.47.2 9 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.As per DSR-2023 Chp-11 Item No 11.56.1 Polished Granite stone slab of colour Black, Cherry/Ruby 10 30 mm thick factory made solid PVC profile panelled door single piece extruded profile decorative finish (wood grain printed on both side) 11 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in white, grey or wooden finish 12 Providing&fixingof6x3 Malesiya Sakhoo wood Wooden Chaukhat 13 Supply&fixingof 32 mmCommercial Quality double leafflush door shutter conformingIS:2202 Part 1 (1983) including fixing ofwooden cleats & Stoppers and including fixing and adjustment of hinges, boult locks, handlesfittings with nessessary screw to be supplied by the department. 14 Supply & Fixing of Saal wood Pannled Door & Window Shutters for Jali Doors/ Windows 15 Mild steel or iron work ofsmall sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not includedinanoverallrates)wroughttorequiredfrom includingsupply ofsteelanditswastageincludingcostof bolts, nuts if required for and welding, grinding and making holesasrequiredcompletionofworkfabricationofholes doors, chaukhats nosing.As Per PWD SOR CHP-10 SCH. PWD Item No 503(40.00 kg / Sqm) 16 Finishing walls with Three coats Primum Acralic smooth Exterior Paintwith Silicon aditiveofron New Work Two or More Coat applied @ 1.43 ltr/10 Sqmover & including Priming Coat of exterior Primer @ 2.20 ltr/ Sqm of Appproved Brand Like Asian/ Berger. As per PWD SOR CHP-15 SCH. PWD Item No 13.47.1 17 Wall Painting with plastic emulsion paint of approved Brand & Manufacturers to give an even shade Two or More Coats on New Work 1st Quality ( Royal/Silk?Asian/ Berger) As per SOR Chp-15 Item No. 13.60.1 18 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over theplasteredwallsurfacetopreparethesurfaceevenand smooth complete. As per SOR Chp-15 Item No 13.80 19 Painting or vansishing on iron worksin small areas or new wood work with one coat of ready mixed priming paint & Two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of work paint to be used should confirm to the I.S.I No. 103 1950 As per SOR Chp-15 SCH PWD Item No 641+642 20 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per DSR-2023 Chp-17 Item No 17.1.1 21 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings,standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per |S : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : 17.51 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern As per DSR-2023 Chp-17 Item No 17.5.1 22 Providing and fixing wash basin with C.l. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer As per DSR-2023 Chp-17 Item No 17.7A(a) 23 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Size 510x1040 mm bowl depht 225 mmas per 18:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board As per DSR-2023 Chp-17 Item No 17.10.1.2 24 Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. As per DSR 2023 Chp-18 Item No 18.8.1 25 Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. As per DSR 2023 Chp-18 Item No 18.8.2 26 ProvidingPVC pipe 110 mm dia 6 kg pressure as per IS:12818 27 Providing110 mm dia PVC Elbow / Bend as per IS:12818 28 Providing110 mm dia PVC Tee dia as per IS:12818 29 Providing110 mm dia PVCY dia as per IS:12818 30 Providing100 mm dia PVC Nahani Trapp dia as per IS:12818 31 Providing and fixing gun metal gate valve with wheel of approved quality.25 mm dia 32 Providing of PVC waterstorage tank.IS:12701marked,withcoverSyntex or Equivalent triple layer but without fittings and the base support for tank. 33 Providing and fixing unplasticised 110 mm -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing incementmortar1:4(1cement:4coarsesand)andmakinggoodthewalletc.complete 34 Labour Charges of Plumbing work for Toilet, Kitchen and Rain Water Line &instlation ofPVCwaterstorage tank. Syntex or Equivalent triple layer but with fittings and the base support for tank. 35 Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats withcpbrassscrewswithconcealedfittingarrangementofapprovedqualityand colour.600mm.longtowlraillengthof645 mm.width78mm.andeffectiveheight of 88 mm, weighing not less than 190 gms. 36 Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material 37 Providing and fixing looking mirror with police ofsize 600x450 mm with bevelles edge 38 Providing of Exaust Fan 39 Providing of Tube Light 40 Providing of Modular Switch Box 4 Module 41 Providing of Modular Plate 4 Module 42 Providing of Modular Switch Box 6 Module 43 Providing of Modular Plate 6 Module 44 Providing of Modular Switch Box 12Module 45 Providing of Modular Plate 12 Module 46 Providing of Modular Electrical Switche 6/16 Amp 47 Providing of Modular Electrical Socket 6 Amp 48 Providing of Modular Electrical Socket 16 Amp 49 Providing of Copper Wire 1.5 mm 50 Providing of PVC Condute Pipe 51 Labour Charges forElectrical Work 52 Supply of Celling Fan 53 Providingof10/16/32 Amp MCB 54 Providingof15 Ltr Electrical Giuser 55 Providing & Fixing of Aluminium Curtain Rod 20 mm Dia & Bracket & Latto with all Matterial & Labour 56 Providing & Fixing15 mm CP Brass Long Body Bib Cock of approved quality confirming to IS Standerd weight not less than 690 gm. As per DSR 2023 Chp-18 Item No 18.51.1 57 Providing & Fixing15 mm CP Brass Angle Valve for basin mixure & giesure Points of approved quality confirming to IS Standerd 8931 weight not less than 690 gm. As per DSR 2023 Chp-18 Item No 18.53.1 58 Providing of CP Wash Basin Mixure 59 Providing of CP Kitchen Sink Mixure 60 Providing of CP Waist Coupling 61 Providing of CP Waist Pipe 32 mm dia 62 Providing of CP PVC Connector 600 mm long 63 Providing of CP Round Jali 5 inch 64 SS Tower Boult 10 mm Dia 8 inch long 65 SS Tower Boult 10 mm Dia 6 inch long 66 SS Tower Boult 10 mm Dia 4 inch long 67 SS Sliding Boult 16 mm Dia 12 inch long 68 SS Door J Hook 69 SS Door Handle 6 inch 70 SS Door Handle 4 inch 71 SS Door Hinges 5 inch 72 SS Window Hinges 4 inch 73 Supply & Instalation of computer set 74 Supply & Instalation of Laser Printer 75 ADD GST 18%
