|
| 1 | Provn of Rain Shed at main gate at 46 WEU Excavation in trenches n.exc 1.5m width and n.exc 1.5m depth and getting out in Soft/ loose soil complete all as specified and directed. |
| 2 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations complete all as specified and directed. |
| 3 | M&L RCC type A1 1:1.5:3 (20 mm graded stone aggregate) as in footings & plinth beams etc complete all as specified and directed. |
| 4 | M&L RCC type A1 1:1.5:3 (20 mm graded stone aggregate) as in columns etc complete all as specified and directed. |
| 5 | M&L formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits of foundation and plinth beams, and similar work, vertical or to batter rough finished concrete flat surface complete all as specified and directed. |
| 6 | M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions finished surface even and smooth complete all as specified and directed. |
| 7 | M&L TMT bar of 10mm dia and over cut to length to shape required cranking and bending spirally for hooping column and like incl binding with mild steel wire not less than 0.9mm dia complete all as specified and directed. |
| 8 | All as per item No. 07 above, but 5mm dia & over upto incl 10mmdia in stirrups spaces & binder complete all as specified and directed. |
| 9 | Returning and filling in with soil obtained from excavation in laying n exc 25cm thick including watering ramming etc complete all as specified and directed. |
| 10 | Removal of excavated spoil of soil to a distance n exc 50mtr and deposited as directed. |
| 11 | M&L Steel work in tubular trusses or rectangular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 12 | M&L Plates (plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed |
| 13 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 14 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 15 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (BMT) of any colour having tensile strengthof 550 Mps as in roof ridge, covering/cladding to wall fixed with self tapping screws or \"J\" hookcomplete all as specified and directed. |
| 16 | M&L 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 17 | S&F 110 mm bore PVC (SWR) bends/shoes any radius complete all as specified and directed. |
| 18 | M&L Mild steel sheet 1.25 mm thick eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and directed. |
| 19 | Supply and fixing in replacement energy efficient FLOOD LIGHT Luminaire LED fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete, including brackets and all accessories needed to fixed to the wall or pole all as per site requirement and as specified and directed. |
| 20 | Supply and fixingof submain wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLS type, cables 2.5 Sqmm drawn through in and including rigid PVC heavy duty concealed conduits including 2.5 Sqmm 1100Volts grade, FRLS type, PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified and directed. Note:- (i)Two runs of cables and one run of continuous earthing cable drawn in conduit/ casing and caping will be measured as one length of sub main with colour code Red Black and Green. (ii)PVC conduit / casing caping and its accessories is deem to be included in this item rates.(iii) Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 21 | Supply and fixing in replacement SPN distribution board sheet metal enclosure double door shutter type factory made fixed flush with wall or outside on wall surface suitable for mounting isolators & MCB\"s 240volts, 200 Amp rated bus bar with front open able cover suitable for SP & N 8 ways all as specified & directed. |
| 22 | Supply and Fixing in replacement MCB SPN/DP 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning all as specified & directed by Engineer-in-charge. |
| 23 | Supply and Fixing in replacement MCB SP 6 to 32 Amp rating 240V, 10KA \"C\" curve complete with connection testing and commissioning all as specified & directed by Engineer-in-charge. |
| 24 | Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC. |
| 25 | Supply and fixing wall mounting fans complete with blades,regulator and accessories, 230 V, 600 MM sweep wall fan (Air Circulator) Turbo Force all as specified & directed. |
| 26 | Provn of Interlocking tiles at 798 SU Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 27 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 28 | M&L for Hard core (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 29 | Demolition of (Un reinforced) Cement Concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level) and remove debris complete all as specified and directed. |
| 30 | M&L for75 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed. |
| 31 | M&L for designed, pre painted coloured chequered cement concrete tiles 300x300x25mm thick with grey cement and pigments set, jointed & pointed in neat cement slurry, laid over 20mm thick screed bed in CM 1:6 finished with pigments match the shade of tiles complete all as specified and directed. |
| 32 | M & L for sand cushioning to receive interlocking tiles incl spreading, levelling in layerscomplete all as specified and directed. |
| 33 | M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade With GreyCement andpigment complete all as specified and directed. |
| 34 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 35 | M&L for PCC 1:3:6 type C1 (using 20mm graded stoneaggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, joints gap filling with bituminous complete all as specified and directed. |
| 36 | Provn of 5/15 AMPs wiring and exhaust fan M& L for Point wiring with 1.5 Sqmm(22/0.30mm) PVC insulated andunsheathed multistranded copper conductor cable, 1100 volts grade, ISI marked, FR type drawn through and including PVC casing caping/ PVC Conduit(ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm (nominalarea) copper conductor cable (multistranded) PVC insulated and unsheathed as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boardswith sunmica top for mounting switches, sockets, fan Regulators, accessories etc as per site requirement and all as specified & directed by Engr-in-Charge for the following:- (a)One light point or one fan point controlled by one switch with cables 1.5 sq. mm sizeNote:-Unit rate include for cutting chases for conduits and sinking for boxes andmaking good to wall, floors etc. |
| 37 | All as per item No. 36 above but for One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire complete all as specified and directed. |
| 38 | All as per item No. 36 here in before but for One 5 Amp 5 pin socket outlet point on independent board complete all as specified and directed. |
| 39 | All as per item No. 36 here in before but with 4.0 Sqmm (36/0.30mm) PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point including PVC cable 4 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes complete all as specified and directed. |
| 40 | Supply and fixing switch piano flush button 5 Amp single pole one way 230 volts white finish complete all as specified and directed. |
| 41 | Supply and fixing of socket outlet flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 42 | Supply and fixing switch socket combination flush type 5 pin 5 Amp multipurpose 230 volts single pole one way suitable for 3 pin/2pin 5 Amp plug top white/ivory finish complete all as specified and directed. |
| 43 | Supply and fixing in replacement of switch socket combination multipurpose flush type 2 in 1 type (3 and 5 pin) 5/15 Amps, 230V, AC complete all as specified and directed. |
| 44 | Supply and fixing sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified and directed. |
| 45 | Supply and fixing ceiling rose surface PVC 50mm dia 3 terminals including PVC mounting block white/ivory finish complete all as specified and directed. |
| 46 | Supply & fixing exhaust fan, steel body/PVC body AC single Phase. 230V of size 250 mm sweep with, blades, and frame and louvers complete as per site requirement and complete all as specified and directed. |
| 47 | Provn of iron grill for agneveer vayu women M & L for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings incl hold fast framework of water tanks and similar work conforming toFe.290.Gde-E-165 complete all as specified and directed. |
| 48 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 49 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed. |
| 50 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair without using extra cement complete all as specified and directed. |
| 51 | M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping, benching, gola, kerb stone, slightly rounded and similar items complete all as specified and directed. |
| 52 | M & L Applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of wall complete all as specified and directed. |
| 53 | M&L Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
| 54 | Cutting holes in brick wall not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar complete all as specified and directed. |
| 55 | Provn of Shed for washing bay at 24 P&S (U) Surface Excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil complete all as specified and directed. |
| 56 | M&L for excavating in post holes (or similar holes) each n.exc 0.5Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25CM, in soft and loose soil complete all as specified and directed. |
| 57 | M&L cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in foundations, filling and mass concrete in post, pillars complete all as specified and directed. |
| 58 | M&L Steel work in tubular trusses or rectangular/ square hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 59 | M&L Plates (plain or chequered square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 60 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, flat iron, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 61 | M&L preparation of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 62 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated/trapezoidal steel sheet 0.50 mm thickof any colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 63 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 64 | M&L for 100 mm thick PCC, (1:4:8) type D2 (using40mm graded aggregate)as in sub base of floors complete all as specified and directed. |
| 65 | M & L for sand cushioning to receive interlocking tiles incl spreading, levelling in layerscomplete all as specified and directed. |
| 66 | M&L for coloured rubber moulded vibro compacted precast concrete interlocking paver block any shape & size conforming IS-15658-2006 of 80 mm thick M-40 grade with grey cement and pigment laid dry and grouted with dry clean sand as in floors complete all as specified and directed. |
| 67 | M&L Providing and laying at or near ground level factory made kerb stone ofcement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 68 | Removing excavated material exc. 250 m but n. exc 500 m and depositing where directed complete all as specified & directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 69 | NOTES :-1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. |
