Tender For Construction Of Shyampur Majhi Than Work, kashipur-West Bengal

Tender For Construction Of Shyampur Majhi Than work -1/Earth-Work in excavetion for foundetion or plinth work in ordinary soil. Depth upto 1500mm. (VP-1 of 315, Item NO-2a) 2/ Filling in foundation or plinth by silver sand in layers not exceeding 150mm as directed and consolideting the same by through saturation with water ramming complete including the cost of supply of sand. (Payment to be made on the measurement of finished quantity. Vide page no=11,5L No-5, PWD(Brick workand concrete Work...) 3/ Brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. VP-14,Item No-1/PWD-schedule of rates BW 2017) 4/ Providing and laying cement concrete with or without renforcement in any part of foundetion/substructure/superstructure/or bridges and culvert with graded stone chips/bazzre specified nominal sizes, including screening and cleaning of coarse aggreegate and sand cost of curing with water, including cost of carraige of all materials but excluding cost of form work and reinforcement works complete. By 1:2:4 concrete. (Below side wall and in floor of culvert) [Below one side 10thk. wall and total floor area of Drain and Culvert] 5/ Brick-Work with 1st class bricks in Cement morter(1:6). (VP-2/PWD2017 3rd corrijonda)i)in foundation and plinth. 6/ Brick-Work in Superstructure with (1:6) Cement Sand Morter VP-15/item No-B(b)PWD Building Schedule 2017- 7/ 125mm thick brick-work with 1st class brick with cement-sand morter(1:4) in ground floor. (VP-16) of 315 PWD-2017 a/ Plaster to wall, floor, ceiling etc.)(i)With 1:6 cement morter(a)20mm thk.inside(VP-189,Item No-1(i)b) PWDS 2017 9/ Plaster Outside with 1:6 cement sand morter 15mm thk.VP-189,item No-1(i)c/PWDS 2017 10/ Plaster Lelling with 154 sand Lenment Mörter 10mm thk. VP-189, Item No-1(il) 11/ RCC Work with 1:1.5:3 Concrete. 12/ Reinforcement for reinforcement concrete work in all the all sorts of structure including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust(if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. 13/ Shuttering Work. (VP-42 of 315/Item No-36(a)PWDS-2017)25 to 30 mm wooden shuttering. 14/ Neat cement punning about 1.5mm thick in wall dado, window sills, floor, drains etc. (VP-192 of 315/item No-15/PWDS-2017) 15/ Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials atc. BWall With Sand Cement Mortar (1:3)15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile above 0.09sqmtr(1) Light Coloured [VP 64 of 315 Item No-35/b/{i}] 16/ Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, 17/ synthetic adhesive and grout material to be supplied by the contrr)e(VP-66 of 315 item No36/B Applying decorative cement based paint of approved quality. (item no:-151/ili/VP197 of PWDS Building Works.) 18/ 40 mm , thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with..slurry coat complete weight[VP-47 of 315, item No-04) 19/ For CIB and Photography:- 20/ For mislenious work cleaning etc

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	10-10-2025	SEE ATTACHED DOCS	Other	30-10-2025

INR 750 /-

INR 2.49 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB