Tender For Provision Of Klp At Samba; 1 Schedule A Part-I.Constructions of Administrative Building (G+1) complete all as specified and as shown in drgs. 2 Construction of Car, Bicycle and Scooter shed for Adm Office complete all as specified and as shown in drgs. 3 Construction of Single living Accn for officers (S/S) complete all as specified and as shown on drgs. 4 Construction of Car Garages for Offrs Mess (04 Nos) + Single Offrs (02) and Servant Qtrs passing and open garage with apron for Cars complete all as specified and as shown on drgs. 5 Construction of Offrs Mess (11 to 18) (S/S) complete all as specified and as shown on drgs. 6 Construction of JCO Mess Club (41 to 60) and single living accn (15 Nos) (G+2) & parking complete all as specified and as shown on drgs. 7 Construction of Single Living Accn for 79 ORs and 26 HAVs (G+3) along with cook house and dinning hall complete all as specified and shown on drgs. 8 Construction of single living accn for 60 ORs and 12 HAVs (G+3) along with cook house and dinning hall complete all as specified and as shown on drgs. 9 Construction of single living accn for 53 ORs and 16 HAVs (G+3) along with cook house and dinning hall complete all as specified and shown on drgs. 10 Construction of scooter shed for single living accn ORs/ HAVs (For 60 scooters) complete all as specified and as shown on drgs. 11 Construction of scooter shed for single living accn ORs/ HAVs (For 100 scooters) complete all as specified and as shown on drgs. 12 Construction of Guard house, SAA store, Armour Shop and Armouries (S/S) complete all as specified and as shown on drgs. 13 Construction of Storage Accn (S/S) complete all as specified and as shown on drgs. 14 Construction of Instruction room & Instruction store/shed (G+1) complete all as specified and as shown on drgs. 15 Construction of OR’s Institute (S/S) complete all as specified and as shown on drgs. 16 Construction of Station Store (S/S) complete all as specified and as shown on drgs. 17 Construction of Drying and Ironing room & mechanical laundary (S/S) complete all as specified and as shown on drgs. 18 Construction of Religious Institute hall complete all as specified and as shown on drgs. 19 Construction of URC + Family Welfare Centre (G+1) complete all as specified and as shown on drgs. 20 Construction of Guard Room complete all as specified and as shown on drgs. 21 Construction of Elevated Sentry Post with toilet complete all as specified and as shown on drgs. 22 Construction of Incinerator complete all as specified and as shown on drgs. 23 Construction of Fire point complete all as specified and as shown on drgs. 24 Construction of Alarm post 04 (Nos) and Flag mast complete all as specified and as shown on drgs. 25 Construction of Garbage and Refuse Bin complete all as specified and shown on drgs. 26 Lumpsum price worked out by the contractor for Earth work, Site Clearance and Site development works as listed in Schedule A Part-II. 27 Lumpsum price worked out by the contractor for Internal Water Supply works as listed in Schedule A Part-III. 28 Lumpsum price worked out by the contractor for Internal Electrification works as listed in Schedule A Part-IV. 29 Lumpsum price worked out by the contractor for Protective works as listed in Schedule A Part-V. 30 Lumpsum price worked out by the contractor for Road, Path and culvert worksas listed in Schedule A Part-VI. 31 Lumpsum price worked out by the contractor for Sewage Disposal works as listed in Schedule A Part-VII. 32 Lumpsum price worked out by the contractor for PCC Hardstanding works as listed in Schedule A Part-VIII. 33 Lumpsum price worked out by the contractor for Area Drainage works as listed in Schedule A Part-IX. 34 Lumpsum price worked out by the contractor for External Water Supply works as listed in Schedule A Part-X. 35 Lumpsum price worked out by the contractor for External Electrification works as listed in Schedule A Part-XI. 36 Lumpsum price worked out by the contractor for Hot water Supply works as listed in Schedule A Part-XII. 37 Lumpsum price worked out by the contractor for Security Fencing and Steel gate works as listed in Schedule A Part-XIII. 38 Lumpsum price worked out by the contractor for Demolition and Dismantling works as listed in Schedule A Part-XIV. 39 EARTH WORK, SITE CLEARANCE & SITE DEVELOPMENT WORKSEarthwork in excavation in trenches or drains in any type of soil by mechanical means (hydraulic excavator)/(not exceeding 1.5m in width and 10 Sqm on plan), exceeding 1.5m upto 3.00m in depth, including dressing of sides and ramming of bottoms, left upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50metre complete all as specified and directed. 40 Earthwork in excavation in trenches or drains in any type of soil by mechanical means (hydraulic excavator)/(not exceeding 1.5m in width and 10 Sqm on plan), exceeding 3.00m upto 4.50m in depth, including dressing of sides and ramming of bottoms, left upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50metre complete all as specified and directed. 41 Earthwork in rough excavation in any type of soil by mechanical means (hydraulic excavator) not exceeding 1.5m deep and getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m complete all as specified and directed by Engineer-in-Charge. 42 Internal Water SupplyGalvanized iron steel water tubing, 15mm bore, medium grade, with all fittings (ISI Marked), fixed complete to walls, ceiling and laid in floors concealed type including cutting chases for concealed water tubing and making good in CM (1:3) complete all as specified and as directed by Engineer-in-Charge. 43 Galvanized iron steel water tubing, 20mm bore, medium grade, with all fittings (ISI Marked), fixed complete to wall, ceiling and laid in floors concealed type including cutting chases for concealed water tubing and making good in CM (1:3) complete all as specified and as directed by Engineer-in-Charge. 44 Internal Electrification Works LED Tube Light 20 Watt luminaire basic all purpose surface and wall mounted LED batten with polycarbonate housing and integrated electronic driver complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to LED fitting connector and necessary mounting clamp on two sets complete all as specified & directed by Engineer-in-Charge. 45 Round shape 06 watt 220 volts AC recessed/ ceiling mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in-Charge. 46 Round shape 15 watt 220 volts AC recessed/ ceiling mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in-Charge. 47 Round shape 12 watt 220 volts AC recessed/ ceiling mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer-in-Charge. 48 LED Luminiare 600mm x 600mm, 36 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamps suitable with roof ceiling connecting up with driver 3 core flexible copper conductor cases of suitable size complete all as specified & directed by Engineer-in-Charge. 49 LED street light fitting 20 watt, 230 volts, AC outdoor type with high pressure die cast aluminium housing and heat resistance complete with driver, lamp bracket with impact corrosion resistant including thermal management multiple optics complete with IP 65/66 protection complete including suitable size GI bracket with medium grade pipe required nut, bolt, washers to fixed on existing wall complete all as specified & directed by Engineer-in-Charge. 50 Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole phase and neutral MCB 20 Amps complete for AC point complete all as specified & directed by Engineer-in-Charge. 51 Ceiling fans complete with blades, down rods, including electronic regulator and accessories, 230 V, 1200mm steep, Min air delivery, 210 CFM with service value 6.00 BEE point five star rated with brushless direct current mortor (BLDC) complete all as specified & directed by Engineer-in-Charge. 52 Exhaust fan, steel body AC Single phase, 230 volt of size 300mm sweep with blades and frame and louvers complete all as specified & directed by Engineer-in-Charge.Note: The contractor should make necessary hole for fixing exhaust fan and fix the exhaust fan with suitable size of fastener and bolts in wall deemed to be included in the quoted rate. 53 MCCB 3 pole, 440 volt, 25-100 Amps rating capacity of breaking capacity 16 kA, fixed type complete all as specified and directed by Engineer-in-Charge. 54 MCCB 3 pole, 440 volt, 160 Amps rating capacity of breaking capacity 16 kA, fixed type complete all as specified and directed by Engr-in-Charge. 55 Sheet metal enclosures distribution boards, double door VTPN, 415 volts 6 way suitable for fixing MCCB as incomer and MCBs as outgoing (One incoming three phase & twelve outgoings single phase) for MCCB & MCBs comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed.Notes:(i) The DB shall be VTPN series.(ii) The DB shall be flush fixed and making disturbed surface matching with existing specifications shall be part of work no extra cost.(iii) Connection of the MCCBs and MCBs with cable shall be made through appropriate size pin/ bottle type copper thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.(v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.(vi) MCCB and MCB rate considered in separate item of schedule. 56 Sheet metal enclosures distribution boards, double door VTPN, 415 volts 4 way suitable for fixing MCCB as incomer and MCBs as outgoing (One incoming three phase & twelve outgoings single phase) for MCCB & MCBs comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed.Notes:(i) The DB shall be VTPN series.(ii) The DB shall be flush fixed and making disturbed surface matching with existing specifications shall be part of work no extra cost.(iii) Connection of the MCCBs and MCBs with cable shall be made through appropriate size pin/ bottle type copper thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.(v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.(vi) MCCB and MCB rate considered in separate item of schedule. 57 Earthing with galvanized steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground pit not less than 2.25mtr deep below ground level with top edge of plate not less than 1.5 mtr below normal ground level connected to 4.00mm dia GI wire & PVC insulated solid copper conductor of size 4mm by means of nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover, 20mm dia (MG) GI watering pipe with funeel wire mesh and protection pipe of GI of 15mm dia up to 7.5mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of strata complete all as shown in electrical plate No 3 of MES SSR Part-I as specified. GI wire & 4mm dia solid conductor PVC insulated for continuity earth wire from test point to main distribution board and all as specified and as directed. Note :- Rate for achieving required depth by compressor machine if required is deemed to be included on the quoted unit rate. 58 Road, Path & CulvertsReflective type cat eye having colour red/yellow to a side, casted aluminium allow of size 1100x100x20mm with built in steam of suitable length for fixing with protected in side as approved by complete all as specified and directed Engineer-in-Charge, Cat Part no OS-786. 59 Stainless steel round delineator having reflector type red/ yellow colour in plastic body protected in side poly carbonated sheet, protected with powder coated wire mesh cage system mounted as approved by complete all as specified and directed Engineer-in-Charge, cat part no. OS-802. 60 Information board with ACP sheet retro reflective writing one side size 600x900 mm. Made around of reflective intensive tape dully fixed on angle iron frame 40x4x4 mm frame with aluminium sheet both side 2mm thick as requiredwith PCC 1:4:8 for post and PCC directed by complete all as specified and directed Engineer-in-Charge. 61 Sewage DisposalDWCPE (SN8) 180 (OD)/ 163(D)mm diameterpipes integral socket and necessary fittings, laid in trenches including jointed and overlapping of pipes complete all as specified and as directed by Engineer-in-Charge. 62 DWCPE (SN8) 200 (OD)/ 175(D)mm diameterpipes integral socket and necessary fittings, laid in trenches including jointed and overlapping of pipes complete all as specified and as directed by Engineer-in-Charge. 63 LLDPE septic tank made of polyethylene, single moulded, and conventional type. The unique size and three chamber design of any make from syntax/ united/ supreme. It should have atleast two manholes provided for convenience and salt resistance and made by non degradable plastic capacity for 10 users, thickness min 10mm, size of manholes 550mm dia. Dia of inlet and outlet pipe should be 110mm and dia of vent pipe is 50mmcomplete all as specified and as directed by Engineer-in-Charge. 64 RCC septic tank for 50 users with effective depth of 1.5 metre and overall depth of 3metre, complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 65 RCC septic tank for 100 users with effective depth of 1.5 metre and overall depth of 3metre, complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 66 RCC septic tank for 150 users with effective depth of 1.5 metre and overall depth of 3metre, complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 67 RCC septic tank for 200 users with effective depth of 1.5 metre and overall depth of 3metre, complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 68 Construction of soakage well, (brick construction) size 1.8mtr dia 3.0m deep, below inlet pipe level (depth from inlet pipe to ground level to 45cm) complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 69 Construction of soakage well, (brick construction) size 3.0mtr dia 4.5m deep, below inlet pipe level (depth from inlet pipe to ground level to 45cm) complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 70 Construction of soakage well, (brick construction) size 3.0mtr dia 6.0m deep, below inlet pipe level (depth from inlet pipe to ground level to 45cm) complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 71 Construction of soakage well, (brick construction) size 3.6mtr dia 6.0m deep, below inlet pipe level (depth from inlet pipe to ground level to 45cm) complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 72 Construction of soakage well, (brick construction) size 2.4mtr dia 4.5m deep, below inlet pipe level (depth from inlet pipe to ground level to 45cm) complete all as specified and shown on drgs and as directed by Engineer-in-Charge. 73 CHIMNEYSupply and fixelectric stainless steel commercial chimney of capacity 1250CFM/hr of size 6 feet hood and size 2 feet length (30 inch in length each with BLDC motor of suitable size ) with LED light , purfreted filter complete along with fixing with help of angle bold complete all as specified by manufarcturer and making hole for flexible exhaust pipe through cutting of wall and making outlet at outside the kitchen area complete all as specified. 74 Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5mtr below normal ground level connected to GI galvanized iron strip of size 32×6mm and 40mm dia bore light grade GI protection pipe for earth strip and GI watering pipe 20 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR part I of 2009 complete all as specified and directed. (Transformer -04 Nos + VCB-02 Nos + 7 NOs Panel -14 Nos + Compacted Sub-station-02 Nos) 75 Supply, laying, jointing and testing LT cable 1100 volts grade of cross sectional area400 sqmm 3.5 core as per IS-7098 (Part-I) 1988, XLPE insulated aluminium conductor heavy duty served with an inner sheathing PVC tape, galvanized steel strip or wire armoured with an overall PVC sheathing laid in trenches, fixed along the poles or passed through GI pipe using clamps wherever required , laid under floors, road etc fixed concealed in walls encased in GI pipe connecting with suitable size of lugs and cable glands etc, each cable termination is to be made with suitable size of cable glands and aluminium thimbles (for junction boxes, security lights, LT panels etc) for incoming and outgoing cables complete all as specified and as directed.Note:- (i) MS clamps with nuts, bolts washer etc required for fixing on wall rate deemed to be included on the quoted rate. (ii)Cable path indicators shall be provided at distance of every 100 metre s and at cable joints and turning of all cables except for 2 core cables size and voltage written on it. The CI path indicator shall be fixed on MS angle iron. The cable path indicators shall be erected at the time of refilling the trenches and the cable path indicator shall be painted as under. -(i) For LT cables - “BLUE”. (iii) Earth work like excavation, Returning re filling, removal, sand cushioning, cable covers, GI pipe measured and paid separately under relevant item of schedule. 76 All as per Item No 75 above but size of cable 300 Sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge. 77 All as per Item No 75 above but size of cable 240 Sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge. 78 All as per Item No 75 above but size of cable 150 Sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge. 79 All as per Item No 75 above but size of cable 70 Sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge. 80 All as per Item No 75 above but size of cable 50 Sqmm 3.5 core complete all as specified and as directed by Engineer-in-Charge. 81 All as per Item No 75 above but size of cable 25 Sqmm 4.0 core complete all as specified and as directed by Engineer-in-Charge. 82 All as per Item No 75 above but size of cable 16 Sqmm 4.0 core complete all as specified and as directed by Engineer-in-Charge. 83 All as per Item No 75 above but size of cable 16 Sqmm 2.0 core complete all as specified and as directed by Engineer-in-Charge. 84 All as per Item No 75 above but size of cable 10 Sqmm 2.0 core complete all as specified and as directed by Engineer-in-Charge. 85 All as per Item No 75 above but size of cable 10 Sqmm 4.0 core complete all as specified and as directed by Engineer-in-Charge. 86 Structural steel work as the cross arms, bracing supports, clamps, back plate fabricated from structural steel sections including nut bolts, washers, welding, bending hot or cold drilling holes for both in any shape or size as indicated or directed by Engineer-In-Charge and inclusive of one primer coat one under coat and one finishing coat of synthetic enamelled paint including preparation of surfaces. 87 Supply, install, testing and commissioning of 11 KV, 350 MVA, 630 A rating, 18.4 KA (Short time current rating), 1 Way, indoor VCB with EnclosureMotorized type as per Specification with 1 incoming and 1 outgoing VCB complete all as specified and directed by Engineer-in-Charge.Location: Sub station No 02 GE Samba office inside campus1. Each Incomer feeder with Switch consists of: (a) Motorized 630 A, 350 MVA VCB enclosure with built in earth switch with full making capacity-01 Nos(b) Mechanical position indicator. Switch ON/ OFF/ Earthed-01 No(c) Live cable indication-01 No(d) Cable compartment cover interlocked with earth switch-01 No.(e) Cable termination bushing-01 Nos for 3 Core 95 Sqmm HT cable.(f) 11 KV XLPE Cable termination Kit with boot-01 Set(g) NO/NC contact for -01 Set(i)Isolator ON/OFF (ii) Earth Switch ON/OFF (iii) Fault indicator Operated.(h) Command Output for -01 Set(i) Isolator close(ii) Isolator Open(iii) FPI Reset(j) Anti Pumping Relay -01 Nos 88 (k) Digital MFM (EM646 or equvt) -01 Nos. (l) Indications: (i) ON/OFF/Trip Indication Light -01 Sets. (ii) Spring Charge Healthy indication-01 Nos. (iii) Trip Circuit Healthy Indication-01 Nos. (iv) Test / Service Postion Indicator-01 Set. (n) Breaker Control Switch-01 No.(o) L/R Switch-01 Nos(q) 3 pin Plug and socket-01 Nos. (r) Toggle switch-01 Nos. (s) Hooter-01 Nos.(t) Annuniciator 8 Watt-01 Nos. (u) 24 V DC Power Pack, 17 Ah-01 Nos. (v) Door switch-01 Nos. (w) Space Heater with thermostat-01 Nos. (x) Control MCB set comprisiong ofSPN MCBs as per relays and meters-01 Set . (y) Cable termination bushings suitable for 2 Nos 3 C x 95 Sq mm XLPE cable -01 Sets each one for one Incoming VCB(z) 11 KV Screened cable termination kit with boots-01 sets each one for one Incoming VCB 89 (a) Gas pressure indicator with auxillary contacts.(b) 1 No. Handle per RMU(c) Battery & Battery Charger3. Civil workThe platform for placing VCB as per manufacturers technical drawing and made suitable PCC ducting for laying cable and fill with reuired level fine sand on treches all as specified and directed by Engr-in-Charge. common items: (i) Battery & Battery charger.(ii)Warning board marking as HT 11 KV Danger with skull and writing with English, Hindi, local language.(iii)Before quoting rate the contractor must visit siteand to connect the new VCB to existing VCB the required size of bus bar and connected items deemed to be included on the quoted rate. The existing Incoming VCB of make CG in sub station no 2. 90 Supply, installation, testing & commissioning of package type/ unitised 11kV / 433 V Outdoor sub-station, 630 kVA made from G.I. enclosure complete as required conforming to IEC 62271-202 only and relevant IS specificationsfor the rating, Internal Arc of 21 or 18.4 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 cores and : 4 Graded stone aggrregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/ outgoing cables/ earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation. RMU, LT panel switchgear and CSS enclosure shall be of same make to ensure life cycle optimization.Note : CSS shall be from OEMs only. Licensed System Integrators are not allowed to supply . 91 HT SWITCHGEAR11kV 630Amps 18.4 KA/3 secNon-Extensible Ring Main Unit Compact switchgear consisting of2 Nos. fixed manual operated Load Break Switch and1 Nos. fixed manual operatedBreaker Module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. Operating sequence of breaker must be O-0.3Sec-CO-3 Mins-CO and suitable for 10000 mechanical operations. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 1 No.(a) Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil.(b ) Capacitive voltage indication fixed type system with LED(c ) SF6 Gas pressure indicator.(d) Padlocking facility.(e ) Protection CT shall be minimum 60/1A ,2.5VA ,5P10. - 3 nos.(f) Operating Sequence of breakershall be O-0.3sec-CO-3MIN-CO(g) LBS module will have FPI.(h) All modules of the RMU shall be suitable for cable termination of 3C x 95 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 1 Set 92 TRANSFORMER630 KVA 11KV/433V DYN-11 Oil type, hermetically sealed energy efficiency level-3transformerwith corrugated wall, without conservator, type of design & Top Bushings for HT & LT with Off load tap switch of rating +5% to -5% @2.5%. Temp Rise - Oil/Winding 40/45 Deg cel. Losses (As per IS-1180 amended up to date)Max Losses @ 50% Load 1745W and Max Losses @ 100% Load 4850 W and Impedance of 4.5% (Subject to IS Tolerance (as per IS1180-2014) The transformer shall be confirming to IS: 2026 and IS: 1180(part-I). amended up to date. (Make of transformer:- As per CSS Manufacturer approved Make- One No. Winding Temperature Indicator with Alarm and trip ContactLT PANELLVS PANEL 1000 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminium as 1 A/sq.mm. ; LT panel made up of 2 mm thick CRCA sheet 93 INCOMER FROM TRANSFORMEROne number 1000Amps 4 pole 415V MDO ACB (incoming) with moulded case construction having breaking capacity 50KA with Ics = Icu = Icw (1 sec) = 50KA with microprocessor release for over current, earth fault & short circuit protections. The ACB should be of command approved make.One number Intelligent multifunction digital meter to read V, A, KVA, KWH,THD, PF Hz, kVARh, Vah, VARh, MD, and RS 485 portetc. with 3 Nos. resin cast CTs of 400/1A class 0.5 accuracy and 5 VA burden - 1 No.One set of Phase indication LED lamps with 2 Amps. Back up MCB, breaker ON/OFF indicating light with MCB, test terminal block set, circuits as per standard practice and auxiliary contact contactors for positive electrical interlocking of breakers etc. as required.Outgoings:(a) MCCB 4 pole, 400A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 02Nos (b) MCCB 4 pole, 250 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 01 No 94 (c) MCCB 4 pole, 200 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 02 Nos (d) MCCB 4 pole, 160 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 01 No (e) MCCB 4 pole, 100A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 02 Nos(f) MCB SPN 40 aMPS, - 02 Nos (for out going).One set of Phase indication LED lamps with 2 Amps. Back up MCB, breaker ON/OFF indicating light with MCB, test terminal block set, circuits as per standard practice and auxiliary contact contactors for positive electrical interlocking of breakers etc. as required.All Civil works such as PCC/RCC foundation, Plateform, Filling trench and pedestal etc as per CSS manufacturers recomandation are included in scope of work. 95 OUTDOOR ENCLOSUREOutdoor type encloser of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL 7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitablly handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment. The supply of all above equipments, erection, testing and commissioning and suitable size of manufacture recommended plinth for erectoin of CSS rate included on the quoted rate. The contractor should submit the technical drawing of Compact sub station including Transformer, HT /LT breakersand foundation drawing recommended by the manufacturer for approval of this office. The rate included for the PDI test and the first fill of Transformer oil. The contractor should submit all Test report of Transforemr, LT /HT panels before made payment by department. 96 Solar two in one (semi integrated)LED street lights 36Watt with aluminium housing, weather proof IP 66>125 lm/watt efficacy, 75Wp solar module of solar PV panel poly crystalline, inbuilt 36 Ah solarbattery 12.8 V, LiFEPo4battery with BMS, dimming and charging controller of MPPT Integral charge controller of electronic efficiency>90% (Inbuilt into the street light), PIR sensor, 5500-6500 K, short circuit protection, reverse polarity protection and prevent reverse discharge battery, overcharge/deep charge protection all as specified and directed by Engineer-in-Charge. Notes: (i)The minimum 80 mm dia GI pole of 08 Mtrs long along with clamp, nut, bolt, washer to fix solar light rate deemed to be included on quoted rate.(ii) The earth work of excavation, PCC, Returning filling, Removal for install pole measured and paid separately.(iii) The ON/OFF control switch placed above 2.5 mtrs height of ground level. 97 Supply, laying, jointing and testing of HT cable 11000 volts grade and working voltage 24 KV of cross sectional area 95 Sqmm 3 Core as per IS-7098 (Part- I) 1988, ISI marked and make, RM of cable, CML No are imposed with insulating cover as well as printed on insulation, of XLPE insulated aluminium conductor heavy duty served with an inner sheathing PVC tape, galvanized steel strip or wire armoured with an overall PVC sheathing laid in trenches, fixed along the poles or passed through GI pipe using clamps wherever required laid under floors, road etc fixed concealed in walls encased in GI pipe connecting with suitable size of lugs and cable glands etc, each cable termination is to be made with suitable size of cable glands and aluminium thimbles for incoming and outgoing cables complete all as specified and directed by Engineer-in-Charge. 98 Note:(i) Earth work like excavation, Returning re filling, removal, sand cushioning, cable covers, GI pipe measured and paid separately under relevant item of schedule.(ii)Cable path indicators shall be provided at distance of every 100 metres and at cable joints and turning of all cables except for 2 core cables size and voltage written on it. The CI path indicator shall be fixed on MS angle iron. The cable path indicators shall be erected at the time of refilling the trenches and the cable path indicator shall be painted as under.(i) For HT 11 KV cables - “BROWN” 99 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs , bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No 4 JCOs Mess)((i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cms Note:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate ), deemed to be included in the item rate.No extra payment will be made. 100 (Note: This panel shall be a front operated with cable entry from the bottom .The fault with standing capacity shall be 25 KA .Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 100 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 01 No (for Incoming).(b) MCCB 4 pole, 40 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 01 No (for out going).(c ) MCCB 4 pole, 25 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 02 Nos (for out going).(d)MCB SPN 6 to 32 amps 240 Volt- 01 Nos (outgoing)(e) Digital Ammeter 0 to 500 Amp with selector switch & suitable range of CTs - 01 No .(f) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(g) LED Phase indicating lamp (Set of three)- 03 Nos (RYB) 101 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs , bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No SM Barrick)(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cmsNote:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work, PCC copping 1:2:4 (40 mm thick stone aggerate ), deemed to be included in the item rate. No extra payment will be made. 102 (Note: This panel shall be a front operated with cable entry from the bottom. The fault with standing capacity shall be 25 KA .Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 400 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 36 KA-01 No (for Incoming).(b) MCCB 3 pole, 63A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 06 Nos (for out going).(c ) MCCB 3 pole, 25A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 01 No (for out going).(d) MCB SPN 10-32 Amps, 10 KA , 240 v-01 No (for Outgoing)(e) Digital Ammeter 0 to 500 Amp with selector switch & suitable range of CTs - 01 No.(f) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(g) LED Phase indicating lamp (Set of three)- 03 Nos (RYB) 103 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs, bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No Laundary )(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cms Note:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work ,PCC copping 1:2:4 (40 mm thick stone aggerate ) ,deemed to be included in the item rate .No extra payment will be made. 104 (Note: This panel shall be a front operated with cable entry from the bottom. The fault with standing capacity shall be 25 KA. Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 200 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 01 No (for Incoming) .(b) MCCB 3 pole, 160 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 1 No (for out going).(c ) MCCB 3 pole,25, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 03 Nos (for out going).(d)MCB SPN 6 to 32 amps 240 Volt- 06 Nos (outgoing)(e) Digital Ammeter 0 to 500 Amp with selector switch & suitable range of CTs - 01 No.(f) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(g) LED Phase indicating lamp (Set of three)- 03 Nos (RYB) 105 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs , bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No 5 near Offr Mess)(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cms Note:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work ,PCC copping 1:2:4 (40 mm thick stone aggerate ) ,deemed to be included in the item rate .No extra payment will be made. 106 (Note: This panel shall be a front operated with cable entry from the bottom .The fault with standing capacity shall be 25 KA .Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 250 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 36 KA - 01 Nos (for Incoming) .(b) MCCB 3 pole 125 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 01 No (for out going).(c) MCCB 3 pole 100 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 01 No (for out going).(d) MCCB 3 pole 63 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA -1 No (for out going).(e) MCCB 3 pole 32 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA -1 No (for out going).(f) MCCB 3 pole 25 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 04 Nos (for out going).(g)MCB SPN 6 to 32 amps 240 Volt - 12 Nos (out going)(h) Digital Ammeter 0 to 200 Amp with selector switch & suitable range of CTs - 01 No.(i) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(j) LED Phase indicating lamp (Set of three)- 03 Nos (RYB) 107 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs, bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No 6 near URC, FWC)(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cms Note:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work ,PCC copping 1:2:4 (40 mm thick stone aggerate ) ,deemed to be included in the item rate .No extra payment will be made. 108 (Note: This panel shall be a front operated with cable entry from the bottom. The fault with standing capacity shall be 25 KA. Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 160 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 25 KA - 01 Nos (for Incoming) .(b) MCCB 3 pole 40 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA -2 Nos (for out going).(c) MCCB 3 pole 25 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 03 No (for out going).(d)MCB SPN 6 to 32 amps 240 Volt - 11 Nos (out going)(e) Digital Ammeter 0 to 200 Amp with selector switch & suitable range of CTs - 01 No.(f) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(g) LED Phase indicating lamp (Set of three) - 03 Nos (RYB) 109 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs, bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No 7 MT Area)(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cmsNote:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work ,PCC copping 1:2:4 (40 mm thick stone aggerate ) ,deemed to be included in the item rate .No extra payment will be made. 110 (Note: This panel shall be a front operated with cable entry from the bottom. The fault with standing capacity shall be 25 KA. Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 100 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 25 KA - 01 Nos (for Incoming).(b) MCCB 3 pole 25 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 03 Nos (for out going).(c)MCB SPN 6 to 32 amps 240 Volt - 05 Nos (out going)(d) Digital Ammeter 0 to 200 Amp with selector switch & suitable range of CTs - 01 No.(e) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(f) LED Phase indicating lamp (Set of three) - 03 Nos (RYB) 111 Supply ,Installation ,testing & commisioning of totally enclosedfeeder piller outdoor type(IP-65) fabricated out of 3.15 mm thick CRCA sheet dust and vermin proof powdercoated double door type(independent cabin including locking arrangementforeach MCCBs and provide space spreader for all MCCBs, bus bar chamber (enclosed) including locking arrangement complete suitable for operating on 415 Volt50 Hz AC, supply internally wired with copper conductor , TPN bus bar of aluminium strip (4 Nos) insulated by heat shrinkable sleaves & clips on shrouds for joints busbar shall be designed to withstand a fault lavel at 415 Volts having legs 45 cms made out of 65x65x6 mm angle iron grouted on brick masonary plateform upto 30 cms .Brick masonary plateform should be 60 cms abovethe Ground Level.Comprising the following : (LT Panel No 8 LIFT)(i) The panel shall be front operated with cable entry from the bottem with cable glands. (ii) Fabrication of feeder piller box to be approved by CPRI width of the panel not less than 60cms Note:- Cost for construction of plateform for panel of brick masonary work in CM 1:6 with foundationPCC 1:4:8 type D-2including plaster work ,PCC copping 1:2:4 (40 mm thick stone aggerate ) ,deemed to be included in the item rate .No extra payment will be made. 112 (Note: This panel shall be a front operated with cable entry from the bottom .The fault with standing capacity shall be 25 KA .Earth bus shall be part of the main feeder pillar.)(a) MCCB 4 pole, 400 A, 415 volt 50HZwith thermal setting 70% to 100% and rupturing capacity not less than 25 KA - 01 Nos (for Incoming) .(b) MCCB 4 pole 100 A, 415 volt 50HZ with thermal setting 70% to 100% and rupturing capacity not less than 16 KA - 07 Nos (for out going).(c)MCB SPN 6 to 32 amps 240 Volt - 05 Nos (out going)(h) Digital Ammeter 0 to 200 Amp with selector switch & suitable range of CTs - 01 No.(d) Digital Voltmeter 0 to 500 V with selector switch - 01 No.(e) LED Phase indicating lamp (Set of three)- 03 Nos (RYB) 113 Security FencingConcertina coil 600mm dia, stretched to 6 RM, having 50 Nos spiral turns per 6 metrelength, spring co wire (2.59 mm thick ) of high tensile strength of 1620 N /sqm with tape (0.52 mm thick) Hot & galvanized upto 20 microns, weight of each coil 8.50 kg and fixing the same on Y-shaped angle iron with6 horizontal RBT (reinforced Barded Tape) wire, stud tied with GI clips to retain horizontal, clips shall be @ 5 Nos per 2 spiral turns approximate 125 clips per coil including necessary bolts complete all as specified and as directed by Engineer-in-Charge. 114 Construction steel gate of 5.5m wide and 3 m high with wicket gate 1.2 m wide and 3m high including RCC columns, painting steel surfaces in two coats over one coat of primer and two coat of colour wash over a coat of white wash to RCC column including excavation and earth work in any type of soil, RCC for columns, Reinforcement for columns and framed work, MS sheet for steel gate, complete all as specified and as directed by Engineer-in-Charge. 115 External Water supplyCutting the existing DI/CI water supply pipe line 150mm dia and inserting Tee 150x150x150 mm complete all as specified and as directed by Engineer-in-Charge. 116 Supply and lay pipe ductile Iron (Conforming to IS-8329-2000) with spigot and socket ends of bore 150 mm(6) diaspecial Class “K-9” including jointing material/joints laid in trenches complete all as specified and as directed by Engineer-in-Charge. 117 Construction of brick masonry valve chamber of internal dimensions 900 x 900 x 900 mm, bottom floor of the pit shall be constructed in PCC (1:3:6) 15 cm thick with 20 mm stone aggregate, inner and exposed surfaces and bottom floor of the pit should be plastered in CM (1:4) 15 mm thick. The top cover of the pit shall be made out of MS sheet min 3 mm thick with angle iron frame made out of MS angle 40 mm x 40 mm x 6 mm with 02 nossteel hinges and locking arrangements duly painted with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. 118 Supply and fix Air release valve 50 mm dia with two air outlets and fixing up in DI water supplymains complete all as specified and as directed by Engineer-in-Charge. 119 LIFTDesign supply, installation, testing & commissioning of 8 passenger lift, having 0.75 meter/second car speed, operate with Permanent Magnet Synchronous motor suitable for 3- Ph, 415V, 50Hz electric power supply, conforming to IS-14665, suitable to serve G + 03 upper floors with AC variable voltage & variable frequency drive (VVVF drive), complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infrared sensor in full height of door & built in announcing system without hand set (04 Nos., one each in car, machine room & near ground floor landing door) complete all as specified and directed.The lift shall conform to the following technical specification.[i)Type of Lift: 8 Passenger[ii) Load Capacity: 544kg[iii)Speed 0.75 meter/second[iv]Type of Drive: AC Variable Voltage & Variable Frequency[v] Type of Machine: Gearless with PMSM (Permanent Magnet Synchronous Motor)[vi]Car Size: Not less than 1.43 m² 120 [vii]Car and Landing Door at all floors: Automatic center opening with VVVF door drive, opening size not less than 800X2000mm, sliding type, fabricated by stainless steel sheet not less than 16 gauge having hairline finish (N-304)[viii] Car Enclosure: Manufactured with stainless steel frame not less than 16 gauge with hairline finish (N304) having stainless false ceiling with hairline finish, internal lighting arrangement with LED light fittings operated on commercial supply and one LED light fitting operated on battery with invertor as emergency light complete internal ventilation system provided with concealed arial/ cross flow fan with auto cut-off system and stainless steel grill/ wire mesh for protection.[ix] Provision of standard thicknes stainless steel hand-rail 40mm diameter all around inside the car cabin.[x] Terminal Buffers: Metal special spring/PU/Oil buffers as per manufacturer specifications. The buffing stroke should not be less than 200mm.[xi] Door Opening (Inside): Protected by centre opening stainless steel doors with hairline finish doors with clear opening of 800X2000mm[xii] Car & Counter Weight Guide: Guide rails of MS T section as per OEM design; counter weight shall be as recommended by OEM[xiii] Flooring: 5mm thick Aluminium chequred plate / as per OEM design 121 [xiv] Signals:[a] Combined luminous hall buttonswith LED/ LCD /VFD hall position indicators at all floors[b] LED/LCD/VFD for car position indicator of stainless steel[c] One No. of car opening panel with luminous buttons in car (stainless steel)[d] Car direction indicator in car & landing[e] Battery operated alarm bell & emergency light (rechargable) along with suitable maintenance free battery (This system should be separate from ARD batteries.)[f]Overload warning feature in car cabin (display and announcing type both)[g] One firemans switch to be installed at ground floor near landing door[h] All signal fixture & car operating panel on hairline stainless steel face plate with hairline finish.[i] Infra red door sensor safety edge of door for entire height.[j] Built in announcing system without handset 2 Nos., one for lift car & ground floor landing door and one anouncing system with handset in machine room.[k] The interior of the car should be provided with a device that audibly announce the floor position of lift car has reached and announce that car entrance/ exit door is open or closed. 122 [xv] Safety Device:[a] Automatic rescue device (ARD)/automatic landing device operating with maintenance-free batteries having suitable capacity. The batteries must have auto charging facilities. The charger input be connected with converter of regerertive drive.[b] The ARD actuation time should be less than one second after failure of power supply and when ARD is operative the car should stop at the nearest floor and then open.[xvi] Operation: Simplex, full collective automatic operation with and without attendant.[xvii] Machine room: Located above the hoist way.Details as per building drawing[xviii] Civil work: Necessary Civil work viz. making good disturbed surfaces, modification to landing space to suit to car size, necessary foundation to machine etc.[xix] One number of wall mounted type telephone instrument of make installed inside of car cabin along with fixing arrangement and telephone cable of suitable size from car cabin to machine room run along with travelling cable. The telephone instrument shall be connected in the telephone DB installed in the machine room.[xx] The lift motor covered with suitable size of OEM recommended steel cover. 123 [xxi] To provide over speed Governor and its connected safety tongs as per OEM recommendation for control over speed if exceed 20% on assigned speed.[xxii] To provide fire sensor mode sensors and its assembly to lift during safety of fire.[xxiii] To provide overload sensors if load exceeds permissible limits the lift will not move and the over loads show in COP & LOP.[xxiv] The lift brakes should be designed as dual safety brakes.[xxv] The contractor should laision with state Lift inspector for making lift license and the lift inspector testing and visiting charges are deemed to be included on the quoted rate. The license issued by the state lift inspector should be submit the department and photocopy of license pasted on inside cabin without inspection of State Lift inspector the payemnt should not be made to contractor for all lift connected items.Provision of suitable size of copper conductor XLPE insulated cable from Lift Panel installed at Ground floor to machine room will deemed to be included the rate quoted by the contractor 124 Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried in ground vertical to a depth not less than 2.25 mtrs deep below ground level with top edge of plate not less than 1.5mtr below normal ground level connected to galvanized GI earth galvanised iron strip of size 32×6mm and 40mm dia bore light grade GI protection pipe for earth strip and GI watering pipe 20 mm dia medium grade from the top edge of earth plate fixed with deep cut on one end of pipe and fix from earth plate up to one feet above ground level of other end and plugged watering pipe at top with MS cap and grouted in PCC 1:2:4 of size 30 X 30 X 30 CM etc and 15 CM alternate layer of charcoal and salt around all sides of earth plate all as shown in electric plate no 3 of SSR partI of 2009 complete all as specified and directed. 125 GI strip 20 x 3.0 mm with procelain insulators and fixing screws etc from earth pit to lift roomcomplete all as specified and as directed by Engineer-in-Charge. 126 Test point terminal block madeof gun metal or phosphorusbronze size 75x75x25mmdrilled and screwed including3 nos. 8mm dia 25mm longhex. head screwto connect earth stip and earthi stip mount suitable size of insulatorscomplete all as specified and as directed by Engineer-in-Charge. 127 Summer AppliancesSupply, installation testing and commissioning of heavy Duty Package Air Cooling Units, Top/ Down (Universal) Discharge with following features 4 inch thick imported high efficiency cellulose pads on 4 sides, optimized 3 Phase motor and fan to deliver the powerful air flow, water pump in wet section, cool flow dispenser for better coooling, auto connection of water tank to quick fill, water connection with ball valve, drain and overflow connection, weather resistat engineering plastic body with dust filter comprising of following capacity complete.Note : (i) The contractor should provide ducting passing drawing and cooling unit technical drawing to the department for approval.(ii) The package air cooler installed at G + 3 building and required T & P for positioning the 24 Nos of plant in top of the roof in six nos of G+3 building in various location in Samba Military Station deemed to be included on the quoted rate. 128 21000 CFM 129 13000 CFM 130 11000 CFM 131 9000 CFM 132 Supply, connection, testing and commissioning of flexible connection of material canvascomplete all as specified and as directed by Engineer-in-Charge. 133 Supply, installation, testing and commissioning of Factory Fabricated GI Sheet Spiral Oval/ Round Ducting with required Hardware Sheet 22 Gaugecomplete all as specified and as directed by Engineer-in-Charge. 134 Supply, installation, Testing and commissioningof Factory Fabricated GI Sheet Spiral Oval/Round Ducting with required HardwareSheet 24 Gauge complete all as specified and as directed by Engineer-in-Charge. 135 Supply and application of Acoustic treatment of ducts with 15 mm thick open cell, elastomeric nitrile rubber, of 140 Kg/m3 density dust free, fiber free, and CFC free insulation pasted inside the Duct with the help of adhesive complete all as specified and directed by Engineer-in-Charge. 136 Supply, installation, Testing and commissioning of Thermal Ductinsulation with 6MM Thick Aluminum Foil Faced XLPE Pasted on Duct with Rubber Adhesive complete all as specified and directed by Engineer-in-Charge. 137 Supply, installation, Testing and commissioning of SupplyAir Aluminum powder coated Linear Grill/Diffuserswith M.S. volume controlduct dampercomplete all as specified and as directed by Engineer-in-Charge. 138 Supply, installation, Testing and commissioning of Site Fabricated MS Angle Iron Stand for Ductable Air Cooling Unit with Black Enamel Paint, Including Lifiting & Placing of Air Washers complete all as specified and as directed by Engineer-in-Charge. 139 Supply Installation, Testing and Commissioning of 2.5sqmm x 4 Core Copper Cablingcomplete all as specified and as directed by Engineer-in-Charge. 140 Supply, installation, testing and commissioning of water connection with 2000 Ltrs Water tank PVC moduled & required accessories for evaporating ductable air cooling unitcomplete all as specified and as directed by Engineer-in-Charge. 141 Supply, laying 3 layer PP-R Polypropylene random co polymer concealed pipes of size 32 mm SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability forcold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors connected on water tank to air cooling unit and motorscomplete all as specified and as directed by Engineer-in-Charge. 142 PP-R Gate valves (brass inserted) of size 32 mm dia to connect the PP-R pipecomplete all as specified and as directed by Engineer-in-Charge. 143 Triple pole and earthencolsure with a threepin and earth plug withsocket complete withone triple pole MCB 40 -63 Ampscomplete all as specified and as directed by Engineer-in-Charge. 144 Supply, Installation, commissioning and testing of Refrigerator inverter type direct cool electricdriven (single phase) 240 volts, 50 Hz with inbuild voltage stabilizer of capacity 200 Ltrs BEE 5 star ratedcomplete all as specified and as directed by Engineer-in-Charge. 145 Supply, installation, commissioning and testing of Water cooler electric driven (single phase) having approx storage capacity of 80 Ltrs and nominal cooling capacity of 40 ltrs per hour complete all as specified and as directed by Engineer-in-Charge. 146 Supply, installation, commissioning and testing of Water cooler electric driven (single phase) having approx storage capacity of 120 Ltrs and nominal cooling capacity of 60 ltrs per hour complete all as specified and as directed by Engineer-in-Charge. 147 Supply, installation & commissioningand testing of desert cooler electric driven (single phase) having nominal air flow of capacity 3000 cum /hr with high efficiencyhoneycomb pad water capacity 75 Ltrs PVCbodycomplete all as specified and as directed by Engineer-in-Charge. 148 Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2.0 KVA complete all as specified and as directed by Engineer-in-Charge. 149 Supply, Installation & commissioningof Glass top Deep freezer 320 Ltrs capacity having double door single phase complete all as specified and as directed by Engineer-in-Charge. 150 Note: The schedule of credit has been attached in tender in Pdf format as Sch A Part-XV and amount of credit schedule i.e. Rs 2006105.50 shall be deducted from the total amount of BOQ to arrive at the contract sum.
