|
| 1 | M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers even and smooth without using extra cement using water proofing compound @ 3% by weight of cement for finished even and smooth (without using extra cement)including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed. |
| 2 | Demolition of reed lathing single or double including battens and plaster or chicken wire lathing complete all as specified and as directed. |
| 3 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches complete all as specified and as directed. |
| 4 | M&L for rendering 15 mm thick in CM (1:4) on one side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 5 | M&L for rendering 12 mm thick in CM (1:6) on other side of lathing finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple complete all as specified and as directed. |
| 7 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in Cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and as directed. |
| 8 | M&L for Rendering 15 mm thk in CM (1:6) on fair face of brick-work or concrete surface to be finished fair and even without using extra cement complete all as specified and as directed. |
| 9 | M&L for brick work with sub class `B\" bricks (using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 10 | M&L for brick work with sub class `B\" bricks(using old size burnt bricks) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed. |
| 11 | S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. |
| 12 | M&L for second class hardwood as in scantlings clean sawn timberfixed including dismantling old timber scantlings 40 sqcm and over in section, in unframed work any position complete all as specified and as directed. |
| 13 | Taking down chowkhat or frames not exc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 14 | Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. |
| 15 | M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed. |
| 16 | S&F factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 17 | S&F Powder Coated aluminium( minimum thickness of powder coationg 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing complete all as specified and as directed. |
| 18 | S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed. |
| 19 | S & F Powder Coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 20 | S & F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 21 | S&F sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 22 | S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm, fixed with tinned tacks or galvanized wire staples complete all as specified and as directed. |
| 23 | S & F 100 size stainless steel butt hinges complete all as specified and as directed. |
| 24 | Supply & Fixing150 mm Aluminium handles, cast type, anodisedcomplete all as specified and as directed. |
| 25 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 26 | S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 27 | M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 28 | M&L for applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of walls including preparation of surface complete all as specified and directed. |
| 29 | M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coats of synthetic enamel paint over a coat of redoxide primer on new surfaces in any tint complete all as specified and directed. |
| 30 | M&Lfor preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over and including a coat of pink wood primer complete all as specified and as directed. |
| 31 | Demolition of cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | M&L for 75 mm thick PCC (1:3:6) type C-2 , using 40 mm graded stone agg in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide that area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed |
| 33 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular),area of each tiles exceeding0.06 sqm but not exceeding 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in whitecement mixed with pigment to match shade of tiles,laid over and including 15 mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 34 | All as per item 33.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick backing coat in CM (1:4). |
| 35 | M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 10mm thick CM (1:4) backing coat including dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 36 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular),area of each tiles exceeding0.18 sqm but not exceeding 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in whitecement mixed with pigment to match shade of tiles,laid over and including 15 mm thick screed bed in CM (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 37 | M&L for PCC 75mm thick,(1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and asdirected. |
| 38 | S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and asdirected. |
| 39 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification complete all as specified and asdirected. |
| 40 | M&L for cement concrete type C-2 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. |
| 41 | M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms mouldscomplete all as specified and as directed. |
| 42 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided, complete all as specified & directed. |
| 43 | M&L TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and including MS wire(annealed) not less than 0.9 mm dia complete all as specified and as directed. |
| 44 | M&L for precast cement concrete type B-1, (1:2:4)(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and as directed. |
| 45 | S&F in repairstubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. |
| 46 | S&F in repairs tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed. |
| 47 | S&F in repairs vitreous china wash hand basin including brackets, white size 550 x 400 mm including cuttingfor and pinning in ends of brackets, including Waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. |
| 48 | M&L in repairfor vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. |
| 49 | S&F vitreous china water closet Padestal pattern (white) including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. |
| 50 | M&L in repair for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader complete all as specified and directed. |
| 51 | S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type(Make Cera, F1020106 or equivalent make as approved by GE) complete all as specified and as directed. |
| 52 | S&F in repairs 15mm dia bib tap cast copper alloy, fancy type, chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 53 | S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 54 | S&F in repairs 15mm diastopvalves/ Angle Cock,fancy type and chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed. |
| 55 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. |
| 56 | S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as specified and as directed. |
| 57 | Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 58 | S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed. |
| 59 | S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed. |
| 60 | S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mmfixed with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 61 | S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed. |
| 62 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor complete all as specified and as directed. |
| 63 | S&F of 110mm dia PVC (SWR) bends complete all as specified and as directed. |
| 64 | S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed. |
| 65 | S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and as directed. |
| 66 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 67 | S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and as directed. |
| 68 | S&F in repairs rotational moulded polyethylene 500 Ltrs Capacity water storage tanks(cylindrical vertical with closed top) double layer hoisted and fixed in position including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia etc complete all as specified and as directed. |
| 69 | Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets etc complete all as specified and as directed. |
| 70 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. |
| 71 | S&F for depth 0.70mm-1.65 DWCPE (SN8) 180 (OD)/ 150 (ID) mm diameter pipes laid on 150mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes bed with and includingnecy excavation, returning filling and removal in any type of soil, RCC/Precast RCC with SFRC ventilating cover and frame, including all items and activities to execute and amek sewer line functionaletc complete all as specified and as directed. |
| 72 | Taking down cement plaster on brick walls including raking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 73 | M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down old plaster from its position etc complete all as specified and as directed. |
| 74 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in soft/ loose soil etc complete all as specified and as directed. |
| 75 | M&L for Plain Cement concrete type B-2, (1:2:4) (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed. |
| 76 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 etc complete all as specified and as directed. |
| 77 | S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W etc complete all as specified and as directed. |
| 78 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia complete all as specified and as directed. |
| 79 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nutexc 30cm long and dia 25mm complete all as specified and as directed. |
| 80 | S&FPrepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old plain corrugated asbestos cement sheet, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed. |
| 81 | S&FPrepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old plain corrugated asbestos cement sheet, any gauge, thickness, including, Nanital or similar pattern roof covering complete all as specified and as directed. |
| 82 | S&FPrepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 83 | S&FPrepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 84 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft/ loose soil complete all as specified ans as directed. |
| 85 | Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all complete all as specified ans as directed. |
| 86 | Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all complete all as specified ans as directed. |
| 87 | Supply only plastic dividing strips, 1.5mm thick and width 28mm complete all as specified ans as directed. |
| 88 | M&L for Rendering 10mm thick in CM (1:6) on brick work/concrete surfaces other than fair faces finished even and smoth without using extra cement complete all as specified and as directed. |
| 89 | M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 90 | M&L for preparation for newly plastered surfaces and applying two coats of white wash complete all as specified and as directed. |
| 91 | Surface excavation n exc 30 cm deep and average 15cm deep in soft/loose soil complete all as specified and as directed. |
| 92 | M&L for machine pressed precast concreteinterlocking paver block any shape & size conforming to IS15658-2006 of 80mm thickness M-40 grade using grey cement & no pigmentlaid over and including 25mm thick sand cushioning including watering and consolidation for laying interlocking blocks etc complete all as specified and as directed. |
| 93 | M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A of size equal angle 40x40 mm of 5mm thk 3.4 kg /mtr including dismantling wrought iron or mild steel work of any descriptioncomplete all as specified and as directed. |
| 94 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any locationcomplete all as specified and as directed. |
| 95 | M&L for Plain fillets of hard woodexceeding 6 sqcm but notexceeding 13 sqcm square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed. |
| 96 | M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. |
| 97 | M&L for preparation of old plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint complete all as specified and as directed. |
| 98 | M&L for applying two coats of oil bound distemper over a coat of primeron oldplastered surfaces of walls including preparation of surface complete all as specified and as directed. |
| 99 | M&L for applying2.00 mmthick Birla white putty/JK white wall care putty on walls complete all as specified and as directed. |
| 100 | Taking down door shutter exceeding 1 sqmtr but not exceeding 2 sqmtr eachand removing to store complete all as specified and as directed. |
| 101 | S & F Door closer of aluminium die cast bodyhydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 102 | S&F 100 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 103 | S&F 75 mm thick Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed. |
| 104 | S&F Aluminium bow handles, cast type, anodised 125 mm long complete all as specified and as directed. |
| 105 | S&F Aluminium bow handles, cast type, anodised 75 mm long complete all as specified and as directed. |
| 106 | S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 107 | S&F 150 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 108 | S & F 110mm bore PVC (SWR) junction single ,(Single T) equal or unequal complete all as specified and as directed. |
| 109 | S&F vitreous china half stall urinalwhite, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 110 | S&F in repairs 15mm bore angle stop cock , cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe complete all as specified and as directed. |
| 111 | S&F in repairs Stainless steel soap dish white of size 160 x 160 x 90 mm as approved fixed with brass screws or embedded in wall complete all as specified and as directed. |
| 112 | S&F CP grating 100 mm dia with waste hole complete all as specified and as directed. |
| 113 | S&F in repairs Health faucet of brass body with wall hook and 1mtr flexible stainless steel braided rubber hose pipe complete all as specified and as directed. |
| 114 | M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. of suitable size as required at site complete all as specified and as directed. |
| 115 | Onelight pointcontrolled by one, one way switch . |
| 116 | One Exh/Ceiling fan point controlled by one, one wayswitch. |
| 117 | One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 118 | One 3 pin socket outlet 5 Amps on the Independent board. |
| 119 | OneCall bell controlled by one, one way switch . |
| 120 | All as per item No-114.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. |
| 121 | S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. |
| 122 | S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. |
| 123 | S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. |
| 124 | S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. |
| 125 | S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. |
| 126 | S&F ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed. |
| 127 | S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed. |
| 128 | S&F for bell push switch 5 amps piano type flush typecomplete all as specified and as directed. |
| 129 | S&F Modular Switch 1 way 6A,1 modulecomplete all as specified and as directed. |
| 130 | S&F modular switch 1 way 16A, 1 module complete all as specified and as directed. |
| 131 | S&F Modular Socket ,6A/2/3 pin combined 2 module complete all as specified and as directed. |
| 132 | S&F Modular Socket ,6A/16A-2/3 pin combined 2 modulecomplete all as specified and as directed. |
| 133 | S&F Modular Fan step regulator, 120W - 2 module complete all as specified and as directed. |
| 134 | M&L for sub main wiring in repairs complete with two runs of4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand including PVC double locked Casing & caping complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length |
| 135 | S& F in repairs Lamp holder, PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified and as directed. |
| 136 | S& F in repairs LED Light fitting 1 x 20 watt (4 Ft), Wall/ Surface mounted, intergrated type with all accessories internally prewired and incl connecting up with, including two Nos PVC blocks and connecting upwith flexible copper cable of size 0.75 Sq mm 3 core and flexible pipe from ceiling rose to the light fitting complete all as specified and as directed. |
| 137 | All as per item No 19 above but10 wattLED, 2\" batten, Wall mountedwith polycarbonate housing/ batten. |
| 138 | S & F LED lamp 0.5 Watt (Red /Green) complete all as specified and as directed. |
| 139 | S& F in repairs including testing of LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 1.2 mtr GI bracket of 25mm bore light grade bent to shape complete all as specified and as directed. |
| 140 | S& F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. |
| 141 | Taking down carefully exisiting water heater storage 25 Ltrs Capacity, PVC connection GI Tubes, Bip taps, and stop valve safecustody and refixing, testing after compltion of the work complete all as specified and as directed. Note : All fansterns Nut and Bolts deemed to be included in quoted rates. |
| 142 | S& F in repairs ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Note : Old ceiling fan shall be deposited to MES Store |
| 143 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm compete all as specified and as directed. |
| 144 | S&F sheet metal enclosure with socket plug top and MCBs , single poleand neutral encloser with two pin and earth plug and socket complete one single pole MCB SP 20 Amps complete all as specified and as directed. |
| 145 | S&F in repairsMCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacityincluding taking down old unsv MCB DBs and cutting chases to wall for fixing DB and making good the disturbed surfaces to match with existing specification complete all as specified and as directed.Note : MCBs will be measured and paid separately. |
| 146 | S&F MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. |
| 147 | S&F MCB Distribution board double door type SPN 4 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. |
| 148 | S&F in repairs MCB TPN 40 to 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 149 | S&F in repairs MCB SPN 32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 150 | S&F in repairs MCB SP 5-40 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB \"C\" seriescomplete all as specified and as directed. |
| 151 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 16 sq mm, 4 core complete Including taking down old unsv cable complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 152 | M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. |
| 153 | M&L for spread fine river sand in trenches complete all as specified ans as directed. NOTE: Punned down thickness shall be measured and paid. |
| 154 | M&L for laying brick sub class \"B\" old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed |
| 155 | Supply & laying tubes \" light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore including taking out unsv GI tubing complete all as specified and as directed. |
| 156 | Supply & laying tubes \" Light grade\" galvanised, with all fittings, fixed complete to walls, poles, ceilings or laid in floors/ trenches/ road crossing for protection of cables of size 25 mm dia bore complete all as specified and as directed. |
| 157 | M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i)The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber, CI frame with CI coverfunnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 441 of MES SSRPart-II. (ii)Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. |
