Reconstruction work of Mahasir Inspection Building and employee quarters under Hardoi section Sharda Canal Hardoi. - CIVIL WORKDemolishing lime concrete manually / by machanicalmeans and disposal of material within 50 metres lead as per direction of engineer in charge 2 Demolishing brick work manually/by machanicalmeans including stacking of servicable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge 3 Cleaning thick jungle and thorney bushes withaut uprooting 4 Earth work in exavation of foundation including all lead and lift T&P etc and manual compection 5 Laying C.C. 1:4:8 in floor with Brick ballast and Coarse Sand per cum 6 Cement concrete in 1:3:6 in floor with coarse sandand stone aggregrate 25-40 mm gauge including costof all Labour & Materials T&P etc. required for proper completion of the work. 7 M-150 class Brick work in 1:4 Cement Mortorwith Cement , coarse sandBut excluding Bricks including costof all Labour & Materials T&P etc. required for proper completion of the work. 8 M-150 class Brick work in 1:4 Cement Mortorwith Cement , coarse sandand Brick including costof all Labour & Materials T&P etc. required for proper completion of the work. 9 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 10 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.2 sal wood 11 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both laces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be 12 Providing and fixing panelled or panelled and glazed shutters for doors , window and clerestory window, fixing with butt hinges of required size with necessary screws,wood work in frames of doors, windows, excluding panelling with will be paid for separatery, all complete as per direction of Engineer-in -charge. (note:- butt hinges and necessary screws shall be paid separately) .second class teak wood 9.5.1.1 13 Providing and fixing wire gauge shutters using galvanized M.S. wire hauge of average width of aperture 1:4mm in both direction with wire of dia 0.63 mm , for door , window and clerestory window with hinges and necessary screws .second class teak wood 9.27.1.1.1 14 Providing and fixing M.S. grills of required patternin windows etc. with M.S. flats, square, round bars etc.including priming coat with approved steel primer all complete9.48.2Fixed to opening/ wooden frames with rawl plugs screws etc. 15 Centering and shuttering for RCC. Work including rent of shuttering, material, labour and T&P required for proper completion of work for slab, and wall etc. 16 RCC in 1:1.5:3 in slaband road with coarse sandand stone aggregrate 12-25 mm gauge including costof all Labour & Materials T&P etc. required for proper completion of the work. 17 Bending, Binding, Cutting and placing in position reinforcement including cost of binding wire including cost of steel.16 MM TMT BAR 18 Bending, Binding, Cutting and placing in position reinforcement including cost of binding wire including cost of steel.12 MM TMT BAR 19 Bending, Binding, Cutting and placing in position reinforcement including cost of binding wire including cost of steel.10 MM TMT BAR 20 Bending, Binding, Cutting and placing in position reinforcement including cost of binding wire including cost of steel.8 MM TMT BAR 21 Providing and laying Brick coba 12 mm thick laid with M150 class brick bat 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with caerelic cement concrete water proofing compound filled gaps of coba & tob of coba morter mixed with water water proofing compound in 1:4 cement and coarse sand mortar finished smooth & mashed tythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/O all material, labour, T&P etc. complete for proper completion of work . 22 25 mm dpc and of cement concrete consisting of one part cement 1.5 part approved coarse sand and 3part approved 1.5 graded stone grit and including water proofing material including all material etc as per PWDSOR ch 7 sr no 361 23 Distempering with oil bound washable distemper of approved brand manufacturer to give an even shade, New work (two or more coats) over and including water thinnable priming coat with cement prime 24 Cement Plastering1:4 Cement plasterincluding allLabour & Materials , T&P etc. required for proper completion of work . 25 Providing and Laying ceramic glazed floor tiles of size 600x600 mm (thickness to be verified by the manufacturer) of 1st quality conforming to IS: 15622 off approved make in colours such as white ,lvory, grey,fume red brown,laid on 20mm thick cement mortar 1:4 jointing with grey cement slurry @ 3.30Kg/sqm including pointing the joining the joints with white cement and matching pigment etc. complete. 26 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sar jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size11.41A.1.3 Size of Tile 600 x 1200 mm 27 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 28 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge11.56.1Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 29 Extra for pre finished nosing to treads of steps of marble stone. 30 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 31 Finishing walls with Acrylic smooth exterior paint of required shade, New work ( Two or more coat applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 32 Earth work by Power transport for a lead of upto 1km including excavation loading, unloding royalty manual compaction and dressing including all lift rates shall be applicable for lead beyond 630 m upto 1 km . 33 French sprit polishing two or more coats on new work including a coat of wood filler 34 S/o Hand rail and Balustrade modular system passive SS-304 grade decorative ralling system comprising of hand rail 50 mm and 1.5 mm thick and 3 No horizontal steel pipe of 19 mm dia and 1.5 mm thick of equal spacing with balustrade of SS pipe of 38 mm and 1.5 mm thick @ 1200 mm C/C of passivated SS 304 grade and fix duly on the floor with specially design rivet expansion boll and finish the surface food and covering with steel shoe, with all visible stainless steel metal of 304 grade in satin finish height of railing is 900 mm as per detailed specification. 35 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side Inclusive) ea per IS: 277 and consisting of angle cleats of size 25 mm. wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.1 channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.1. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of celling fixed to wall/partition with the help of rawt plugs at 450 mm centre, with 25 mm long dry wall screws 230 mm interval, including faxing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm cic, including jointing and finishing to a flush finish of tapered and square edges of the board with mcommended jointing compound jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed. all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 1245.4Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15% perforated area with perforation size and pattern as approved by the Engineer In-charge and as per manufacturers specification, with al 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60 36 SANITARY MATERIALProviding and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware /Hindware /Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests 37 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, Parryware/ Hindware/ Seabrid /Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 38 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required. a)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 39 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia 40 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia 41 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 42 Providing and fixingStainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 43 Providing and fixing PTMT Bottle Trap for Wash basin and sinkBottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 44 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 45 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 46 CP Brass fittingsProviding and fixing unplasticised PVC connection pipe with brass unions45 cm length15 mm nominal bore 47 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 a) 15 mm nominal bore 48 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards andweighing not less than 690 gms.a) 15 mm nominal bore 49 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 50 C.P Central Hole basin mixer with U shaped round casted spout with 450mm long braided hoses15 mm dia 51 C.P Wall Mixer with 115 mm long Bend Pipe for connection to Overhead Shower (with bush & piston Divertor Fitting Aerator L&k.Jaquar15 mm dia 52 C.P Wall Mixer with 115 mm long Bend Pipe for connection to Overhead Shower (with bush & piston Divertor Fitting Aerator L&k.Jaquar15 mm dia 53 C.P Brass shower heavy quality (Jaquar ESSCO Cera, Hindware)100 mm dia 54 PVC PIPES & FITTINGS AND RAIN WATER PIPESProviding and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm 55 Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size)around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground)100mm dia 56 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.110 mm 57 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.110 mm Coupler 58 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.111 mm single tee with door 59 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.110mm bend 87.5 degree 60 INTERNAL & EXTERNAL WATER SUPPLY WORKSProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 61 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.25mm dia nominal outer dia pipes 62 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.32mm dia nominal outer dia pipes 63 ELECTRICAL WORKSWiring points for light/fan point / exhaust fan point / call bell point with 1.5 sqmm.FRLSH PVC insulated copper condutor single core cable in surface / recessed conduit, with piano type switch, phenolic laminated sheet, suitable size MSbox and earthing the point with 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable etc. as required. 1.1.1 -Light Point 64 Wiring points for light/fan point / exhaust fan point / call bell point with 1.5 sqmm.FRLSH PVC insulated copper condutor single core cable in surface / recessed conduit, with piano type switch, phenolic laminated sheet, suitable size MSbox and earthing the point with 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable etc. as required. 1.1.2 -Fan Point 65 Wiring points for light/fan point / exhaust fan point / call bell point with 1.5 sqmm.FRLSH PVC insulated copper condutor single core cable in surface / recessed conduit, with piano type switch, phenolic laminated sheet, suitable size MSbox and earthing the point with 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable etc. as required. 1.1.3 -Exhaust Fan Point 66 Wiring points for light/fan point / exhaust fan point / call bell point with 1.5 sqmm.FRLSH PVC insulated copper condutor single core cable in surface / recessed conduit, with piano type switch, phenolic laminated sheet, suitable size MSbox and earthing the point with 1.5 sq. mm FRLS PVCinsulated copper conductor single core cable etc. as required. 1.1.1 -Call BellPoint 67 134- Wiring point for plug with 1.5sq mm PVC insulater single core aluminium conductor cable in heavy guage rigit steel conduit concealed in the wall complete with 8 SWG GI earth continuity wire, piano type swith and soket etc. 68 Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. Pipe 19mm dia duly painted, complete in all respects. 69 Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects. 70 Supply and fixing hexagonal/Round G.P. fan box of approved make made up of 1.0mm thick ISI Marked G.P. sheet spot weeldeed Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5mm G.P. Sheet made upper & lower cover duly screewed fitted with 300mm round zink coted M.S Bar X 12mm & brand name should be embossed.Fixing with wiring conduit laid in the R.C.C roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. 71 Supplyfixingofelectronic fan regulator(Modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 72 Supply, Installation, Testing and Commissioning of 1200 mm sweep. BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B. 3 nos. blades, 30 cm long down rad, 2 nos canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.BEE 5 star rated-1200 mm sweep 73 Supply & fixing of recess mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect.(CAT: AAA) 74 Supply & fixing of LED Tube Light with batten suitable for up to 1 x 22 watt LED tube light complete including tube etc on surface complete in all respects.(CAT: AAA) 75 2.4 Supply and fixing of surface/flush mounting distribution boards with additional metal door withot MCB complete in all respects.(CAT: A)4 Way TPN 76 Supply and fixing of 6Amp to 32 Amp(10 KA) MCB in existing MCB, DB complete with connections as required. (CAT: A) 77 . Supplying and fixing of 32Amp. 415V metal clad T.P.N. rewirable type switch fuse unit on angle iron bracket complete in all respect as per P.W.D. Electrical schedule item No. 315cat-B 78 SUPPLY & INSATALLATION OF 110-130 WATT TWO WAY ELECTRIC LED STREET LIGHTOF 7.00 METER G.I. OCTAGONAL POLE. 79 Other Items For mahasir Inspaction House and Staff RegidanceProviding and fixing of submersible water pump i/c three phase 415V power supply, starter,boring with required t&p, labour etc As per market rate
