Tender For Renovation Work Of Nabinagar Inspection Building. - Ordinary jungle clearance withall labour, T& P etc. required for proper completion of work as per direction of Engineer-in-Charge. 2 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same in all kinds of soil 3 Dressing of excavated earth including all labour ,T&P etc complete 4 Dismantling of existing plaster including disposal of refuse as per direction of Engineer-in-Charge within a distance of 60 m. 5 Racking out joints of brick work in cement or lime mortar and preparing the surface for Re-Plasteringincluding disposal of refuse to the Dumping Ground all complete as directed by the Engineer in charge. 6 Demolising lime concretemanually/ by mechanical Means and disposal ofmaterial with in 50 mts lead as per direction by the Engg-in-charge 7 Demolishing Cement concrete manually/ by mechanical Means includingdisposal ofmaterial with in 50 mts lead as per direction by the Engg-in-charge.(Nominal Concrete 1:3:6) 8 Demolishing Brick work in cement mortar manually/ by mechanical Means including stacking of serviceable materialdisposal of Unserviceable material with in 50 mts lead as per direction by the Engg-in-charge. 9 Dismantling Doors, Windows, and Clerestory windows (steel or wood)shutter including chowkhats, architrave, hold fast etc. complete and stacking with in 50 M lead 10 Earth Excavation in foundation in ordinary soil including lift 1.5m and lead upto 30m including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in -charge upto a distance of 50 m. from the foundation trenches. of sockpit, Drain & septick tank. 11 Bending, Binding, Cutting and placing in position reinforcement including cost of labour and Material T&P etc required for proper completion of work . 12 Brick work with common burnt clay(non modular) brick of class-150 in foundation & Plinth in 1:4(1cement :4 coarse sand) 13 12 mm thick cement plaster in Narauna I.H 1:6 cement coarse sand including all material labour and T&P etc 14 Treatment of soil under existing floor using chemical emulsion @ one liter per hole,300 mm apart including drilling 12 mm dia holes and plugging with cement mortar 1:2(1cement:2 coarse sand)to match the existing floor with chlorpyriphos / lindane E.C.20% with 1% concentration. 15 Providing and Laying cement concrete 1:2:4(1cement:2 coarse sand:4 graded stone ballast 20mm nominal size) including supply of all materials.labour and T&P etc. Required for -proper completion of work.in Rooms,bath Rooms, store room floor. 16 Providing laying vetrified floor tiles in different sizes ( thickness to be specified by the manufacturer)with water absorptoin less than 0.08% and coforming to IS 15622, of approved make,in all colours and shades ,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement slurry@3.3kg/sqm including grauting the joints with white cement and matching pigmente etc complete.(600x600mm size) 17 Providing laying rectified Glazed ceramic floor tiles of size 300x300 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement slurry@3.3kg/sqm including pointing the joints with white cement and matching pigmente etc complete. 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. 19 Providing, cuttingand Laying Murga Jali with all material labour and T&P etc complete . in between C.C.1:2:4 on slab (1/2 x 24 gauge) 20 Providing and Laying cement concrete 1:1.5:3 (1cement :1.5coarse sand:3 graded stone ballast 20mm nominal size) over roof including supply of all materias, labour and T&P etc. Required for -proper completion of work and curing complete 21 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modifiedcementitious bond coat @ 2.2 kg cement per sqm ofsurface area mixed with specified proportion of approved polymer. 22 Providing and appliying white cement base putty 1mm thick over plastered surface to prepare the surface even and smooth in including all cost of material, labbour and T&P etc. complete. 23 Distempering with oil distemper of approved quality two coats on new wall surface including proper completion of the work. 24 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coals applied 1.43 Itr/10 sqm over and including priming coat of exterior primer applied sqm) 2.20 kg/ 10 sqm (apex Ultima, weather coat All guard) asian, berger 25 Wax polish on new wood work with approved ready made wax polish or approved french polish after rubbing down with sand paper including supply of all materials,labour and T&P etc. Required for proper complition of the work. 26 Fabrication ofmildsteel /ironworkingrill and gate railing, doorandwindowframeincluding cuttingweldingrivetingandhinges where necessary all labour, material T&P etc. required with one coat of red oxide. 27 Painting on iron & wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint including supply of all materials, labour, T& P etc. all complete. 28 Providing and fixing glass panes with putty and and nails wherever necessaryinluding in, doors, windows,clerestory window,ventilators, complete with 4.00 mm thick glass panes. 29 Providing Second Class Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 30 Providing and fixing panelled and glazed shutters of 35 mm thk. Second class Teak Wood for doors ,window and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seprately ,all complete as per direction of Engineer-in-charge (Note :-Butt hinges and necessary screws shall be paid seprately) 31 P/F Brass Tower Bolt Barrel type with screw complete100x10 mm As per PWD SOR Chap-11 Item no.-12 32 P/F Brass Tower Bolt Barrel type with screw complete200x10 mm As per PWD SOR Chap-11 Item no.-12 33 P/F M.S. Sliding bolt with nut & bolt250x16 mm long 34 P/F MS Door Handle 125 mm Long with screw complete 35 P/F M.S.pressed Butt Hinges with screw complete125x65x2.12mm As per PWD SOR Chap-11 It no.- 8 36 P/F M.S.pressed Butt Hinges with screw complete100x58x1.90mm As per PWD SOR Chap-11 It no.- 8 37 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closerwith double speed adjustment with necessaryaccessories and screws etc. complete. 38 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hingesand necessary screws :30 mm thick shutters with ISI marked stainless steel butt hinges ofrequired size of Second class teak wood 39 Electrical Work Wiring forlight point/Fan point/Exhaust fan point/Call bell pointwith 1.5 sq.mm FRLS P.V.C. insulated copperconductor single corecable in surface / recessed medium class PVC conduit with piano type switch all complete.(Group B) 40 Wiring pointforplugwith 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable orearthwiredrawninsidethe PVCconduit with piano type switch all complete. 41 Wiring point for power plug/ H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc. complete in all respect including matching colour wash. 42 Earthing with Copper earth plate 600mm x 600mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe of 2.7 m long etc. with charcoal/coke and salt as required. 43 S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. 44 S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve Cat B 45 S&F of 6 Amp. to 32 Amp. TP MCB (10 KA) C CurveCAT A complete in all respects as required. 46 Supply,Installing,Testing & Commissioning of 63 Amp. 415 VT.P.N. tap off box made of 1.6 mm thk. sheet Steel enclosure duly painted with powder coating on existing rising main complete with TPN Disconnector FSU and HRC fuses, connections, earthing etc. as required. 47 Supply and fixingof LED Tube Light with batten suitable for upto 1 X 22 watt LED tube light complete includingtube etc on surface complete in all respect.CAT- AA 48 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirmingto IP65 and above Protection complete in all respect.CAT- AA 49 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box includingsupply of all material, labour T&P etc. required for proper completion ofwork. 50 Supply and wiring of submain with two number 4 sq.mm. PVC insulated 1100 V grade singlecore aluminium conductor cable in 20 mm dia a heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. PVC insulated aluminium conductor cable as earth continuitywire, etc. complete in allrespect. 51 Water Supply & SanitaryP/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Concealed work, includding cutting chases20 mm dia 52 Water Supply & SanitaryP/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Concealed work, includding cutting chases25 mm dia 53 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge external work .20 mm dia As per PWD SOR CH 20 item 18.9.2 54 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge external work .25 mm dia As per PWD SOR CH 20 item 18.9.3 55 P/F in gun metal gate valve with C.I. wheel of approved quality (screwed end)20mm dia As per PWD SOR CH 20 item 18.17.1(A) 56 P/F in gun metal gate valve with C.I. wheel of approved quality (screwed end)25mm dia As per PWD SOR CH 20 item 18.17.1 57 P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour T&P etc. 58 P/F C.P. Brass Stop Cock (Concealed) 15 mm Nominal Bore size of approved make. 59 P/F 15 mm Nominal hole size C.P. brass long nose bib cocks of approved quality. 60 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 61 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 62 P/F 8 mm dia C.P./S.S. jet with flexible tube up to 1m long with SS triangular plate to Europian type W.C.of quality and make as approved by Engineer -in -charge. 63 Providing and fixing white vitreous china clay flate back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm size respectively with automatic flushing cistern with standard sizeflush pipe and c.p.brass spreaders with brass union and G.I clamps complete ,including pailing of fittings and brackets,cutting and making good the wall and floors where ever required(one urinal basin) 64 Providing and fixing wash basin with C.I. bracket 15 m m C.P. brass piller taps 32 mm C.P.waste of standard pattern including painting of fitting and brakets ,cuttingand making good the wall whereerver required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 65 Providing and fixing soil ,waste and vent pipes .100 mm dia Sand cast iron S&S pipe as per IS: 1729 66 Providing and fixing square mouth S.W. gully trap classSP-1complete with C.I. grating brick masonery chamber with water tight C.I.cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg /standared design .100x100 mm size p type With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 67 P/F mirror of 600x450 mm size beveled edge mirror of supirior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleatswith C.P,brass screw and washers complete. 68 Supplying and Fixing C.I. Cover without frame for manhole 500 mm dia C.I. Cover (medium duty) the weight of the cover to be not less than 58 kg 69 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes but without fittings and base support. 70 Providing and fixing ball valve (brass) of approved quality,high or low presure ,with plastic floats complete. 15 mm nominal bore. 71 P/F Chromium plated shower rose with 15 mm or 20 mm inlet and 100 mm dia 72 P/F lead chaulked joint to cast iron soil waste & ventilation pipe and fittings ofpipe of75 mm dia nominal size including testing of joints 73 Supplying ana fixing sign bord on angle iron frame 40x40x6mm 25x5mm flat iron bracing sand 18 SWG (1.25mm) MS sheet with one coat of oxide primer including earth work and stone grit ( all work done as per direction of engineer in charge )including cost of material labour T&P etc. 74 Dismantling of existing plaster including disposal of refuse as per direction of Engineer-in-Charge within a distance of 60 m. 75 Racking out joints of brick work in cement or lime mortar and preparing the surface for Re-Plasteringincluding disposal of refuse to the Dumping Ground all complete as directed by the Engineer in charge. 76 Demolising lime concretemanually/ by mechanical Means and disposal ofmaterial with in 50 mts lead as per direction by the Engg-in-charge 77 Demolishing Cement concrete manually/ by mechanical Means includingdisposal ofmaterial with in 50 mts lead as per direction by the Engg-in-charge.(Nominal Concrete 1:3:6) 78 Dismantling Doors, Windows, and Clerestory windows (steel or wood)shutter including chowkhats, architrave, hold fast etc. complete and stacking with in 50 M lead 79 12 mm thick cement plaster in Narauna I.H 1:6 cement coarse sand including all material labour and T&P etc 80 Treatment of soil under existing floor using chemical emulsion @ one liter per hole,300 mm apart including drilling 12 mm dia holes and plugging with cement mortar 1:2(1cement:2 coarse sand)to match the existing floor with chlorpyriphos / lindane E.C.20% with 1% concentration. 81 Providing and Laying cement concrete 1:2:4(1cement:2 coarse sand:4 graded stone ballast 20mm nominal size) including supply of all materials.labour and T&P etc. Required for -proper completion of work.in Rooms,bath Rooms, store room floor. 82 Providing laying vetrified floor tiles in different sizes ( thickness to be specified by the manufacturer)with water absorptoin less than 0.08% and coforming to IS 15622, of approved make,in all colours and shades ,laid on 20 mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement slurry@3.3kg/sqm including grauting the joints with white cement and matching pigmente etc complete. (600x600mm size) 83 Providing, cuttingand Laying Murga Jali with all material labour and T&P etc complete . in between C.C.1:2:4 on slab (1/2 x 24 gauge) 84 Providing and Laying cement concrete 1:1.5:3(1cement:1.5coarse sand:3 graded stone ballast 20mm nominal size) over roof including supply of all materias, labour and T&P etc. Required for -proper completion of work and curing complete 85 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.SBR Polymer (@10% of cement weight) modifiedcementitious bond coat @ 2.2 kg cement per sqm ofsurface area mixed with specified proportion of approved polymer. 86 Providing and appliying white cement base putty 1mm thick over plastered surface to prepare the surface even and smooth in including all cost of material, labbour and T&P etc. complete. 87 Distempering with oil distemper of approved quality two coats on new wall surface including proper completion of the work. 88 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coals applied 1.43 Itr/10 sqm over and including priming coat of exterior primer applied sqm) 2.20 kg/ 10 sqm (apex Ultima, weather coat All guard) asian, berger 89 Fabrication ofmildsteel /ironworkingrill and gate railing, doorandwindowframeincluding cuttingweldingrivetingandhinges where necessary all labour, material T&P etc. required with one coat of red oxide. 90 Painting on iron & wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint including supply of all materials, labour, T& P etc. all complete. 91 Providing and fixing glass panes with putty and and nails wherever necessaryinluding in, doors, windows,clerestory window,ventilators, complete with 4.00 mm thick glass panes. 92 Wood WorkProviding Second Class Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 93 Providing and fixing panelled and glazed shutters of 35 mm thk. Second class Teak Wood for doors ,window and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seprately ,all complete as per direction of Engineer-in-charge (Note :-Butt hinges and necessary screws shall be paid seprately) 94 P/F Brass Tower Bolt Barrel type with screw complete100x10 mm As per PWD SOR Chap-11 Item no.-12 95 P/F Brass Tower Bolt Barrel type with screw complete200x10 mm As per PWD SOR Chap-11 Item no.-12 96 P/F M.S. Sliding bolt with nut & bolt250x16 mm long 97 P/F MS Door Handle 125 mm Long with screw complete 98 P/F M.S.pressed Butt Hinges with screw complete125x65x2.12mm As per PWD SOR Chap-11 It no.- 8 99 P/F M.S.pressed Butt Hinges with screw complete100x58x1.90mm As per PWD SOR Chap-11 It no.- 8 100 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closerwith double speed adjustment with necessaryaccessories and screws etc. complete. 101 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hingesand necessary screws :30 mm thick shutters with ISI marked stainless steel butt hinges ofrequired size of Second class teak wood 102 Electrical WorkWiring forlight point/Fan point/Exhaust fan point/Call bell pointwith 1.5 sq.mm FRLS P.V.C. insulated copperconductor single corecable in surface / recessed medium class PVC conduit with piano type switch all complete.(Group B) 103 Wiring pointforplugwith 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable orearthwiredrawninsidethe PVCconduit with piano type switch all complete. 104 Wiring point for power plug/ H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in the wall, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc. complete in all respect including matching colour wash. 105 Earthing with Copper earth plate 600mm x 600mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe of 2.7 m long etc. with charcoal/coke and salt as required. 106 S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect. 107 S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve Cat B 108 S&F of 6 Amp. to 32 Amp. TP MCB (10 KA) C CurveCAT A complete in all respects as required. 109 Supply,Installing,Testing & Commissioning of 63 Amp. 415 VT.P.N. tap off box made of 1.6 mm thk. sheet Steel enclosure duly painted with powder coating on existing rising main complete with TPN Disconnector FSU and HRC fuses, connections, earthing etc. as required. 110 Supply and fixingof LED Tube Light with batten suitable for upto 1 X 22 watt LED tube light complete includingtube etc on surface complete in all respect.CAT- AA 111 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirmingto IP65 and above Protection complete in all respect.CAT- AA 112 Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box includingsupply of all material, labour T&P etc. required for proper completion ofwork. 113 Supply and wiring of submain with two number 4 sq.mm. PVC insulated 1100 V grade singlecore aluminium conductor cable in 20 mm dia a heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. PVC insulated aluminium conductor cable as earth continuitywire, etc. complete in allrespect. 114 Water Supply & SanitaryP/F stainless steel A ISI 304(18/8) Kitchen sink as per including 13963 with C.I. Brackets and stainless steel plug 40 mm including painting of fitting and brackets cutting and making good the walls wherever required.(510x1040 mm bowl depth 250mm) 115 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Concealed work, includding cutting chases20 mm dia 116 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Concealed work, includding cutting chases25 mm dia 117 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge external work .20 mm dia As per PWD SOR CH 20 item 18.9.2 118 P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge external work .25 mm dia As per PWD SOR CH 20 item 18.9.3 119 P/F in gun metal gate valve with C.I. wheel of approved quality (screwed end)20mm dia As per PWD SOR CH 20 item 18.17.1(A) 120 P/F in gun metal gate valve with C.I. wheel of approved quality (screwed end)25mm dia As per PWD SOR CH 20 item 18.17.1 121 P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour T&P etc. 122 P/F C.P. Brass Stop Cock (Concealed) 15 mm Nominal Bore size of approved make. 123 P/F 15 mm Nominal hole size C.P. brass long nose bib cocks of approved quality. 124 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 125 P/F 8 mm dia C.P./S.S. jet with flexible tube up to 1m long with SS triangular plate to Europian type W.C.of quality and make as approved by Engineer -in -charge. 126 Providing and fixing white vitreous china clay flate back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm size respectively with automatic flushing cistern with standard sizeflush pipe and c.p.brass spreaders with brass union and G.I clamps complete ,including pailing of fittings and brackets,cutting and making good the wall and floors where ever required(one urinal basin) 127 Providing and fixing wash basin with C.I. bracket 15 m m C.P. brass piller taps 32 mm C.P.waste of standard pattern including painting of fitting and brakets ,cuttingand making good the wall whereerver required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 128 Providing and fixing soil ,waste and vent pipes .100 mm dia Sand cast iron S&S pipe as per IS: 1729 129 Providing and fixing square mouth S.W. gully trap classSP-1complete with C.I. grating brick masonery chamber with water tight C.I.cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg /standared design .100x100 mm size p type With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 130 P/F mirror of 600x450 mm size beveled edge mirror of supirior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleatswith C.P,brass screw and washers complete. 131 Supplying and Fixing C.I. Cover without frame for manhole 500 mm dia C.I. Cover (medium duty) the weight of the cover to be not less than 58 kg 132 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes but without fittings and base support. 133 Providing and fixing ball valve (brass) of approved quality,high or low presure ,with plastic floats complete. 15 mm nominal bore. 134 P/F lead chaulked joint to cast iron soil waste & ventilation pipe and fittings ofpipe of75 mm dia nominal size including testing of joints 135 Providing & Installation & Boring with 15 cm casing pipe including lowering of assembly and extracting casing pipe with all labour,T&P and equipment complete 136 Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conformingtoMNREspecifications as amended,consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitablestrength with following components complete. 137 Earth Excavation in foundation in ordinary soil including lift 1.5m and lead upto 30m including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in -charge upto a distance of 50 m. from the foundation trenches. 138 Providing and Laying cement concrete 1:2:4 (1cement :2 coarse sand:4 graded stone ballast 20 mm nominal size) including supply of all materials. labour and T&P etc. Required for -proper completion of work.in Rooms,bath Rooms, store room floor. 139 Boring/drilling bore well of 300 mm dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 140 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of 100 mm nominal size dia having minimum wall thickness 5.00 mm, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 141 Brick work with common burnt clay(non modular) brick of class-150 in foundation & Plinth in 1:4(1cement :4 coarse sand) 142 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 143 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 144 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge. 145 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 146 Bending, Binding, Cutting and placing in position reinforcement including cost of labour and Material T&P etc required for proper completion of work . 147 Providing and Laying cement concrete 1:1.5:3(1cement:1.5coarse sand:3 graded stone ballast 20mm nominal size) including supply of all materias, labour and T&P etc. Required for -proper completion of work and curing complete 148 Providing & Laying 110 mm dia PVC drainage pipe for Collection of Rain Water complete in all respect including cost of allmaterial, labour and T&P etc 149 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacityair compressor , running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc. all as per requirement and direction of Engineer-in-charge. 150 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
