|
| 1 | Item No 1.Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete I no.46.19 |
| 2 | Item No 2. Removingdoorsandwindowswithframesandstackingthematerialsasdirectedwithall leads, lifts etc. complete.I.NO.46.15 |
| 3 | Item No 3.Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. I NO.32.33 |
| 4 | Item No 4.RemovingW.C.pansincludingdisconnectingthesanitaryandwatersupplyconnections, removing and breaking flooring and bed con-crete around pan removingthe same carefully and stackingtheserviceablematerialsasadn wheredirected includingthrowingthe unserviceablemateriaslsoutsideetc.carefullyandthrowingouttherefusaloutsideetc.complete.I.NO.46.41 |
| 5 | Item No 5. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means I No.21.02 |
| 6 | Item No 6.Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.I.NO.21.40 |
| 7 | Item No 7. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) I No.24.01 |
| 8 | Item No 8.Providing and laying in situ /Ready Mixcement concreteM-20of trapfor R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centeringformwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) I.NO.25.11 |
| 9 | Item No 9. Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite / for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)I.NO.25.31 |
| 10 | Item No 10.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)I.NO.25.50 |
| 11 | Item No 11.Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)I.NO.25.70 |
| 12 | Item No 12.Providingand applyingwater proofing treatment using acrylic polymer modified cement basedwaterproofingcoatingwithfibreglassmeshmixingattherateof powdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwith twocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.I.No.31.09 |
| 13 | Item No 13.Providing andlaying Castinsitu/ReadyMixcement concrete M-15of trap/granite/quartzite/gneiss metal for copingtoplinth or parapet, moulded or chamferedasper drawingorasdirectedincludingsteelcentering,plywood/steel formworkcompacting, rougheningthemifspecialfinishistobeprovided,finishing uneven and honeycombedsurfaceandcuringetc.complete.TheCementMortar1:3 plasterisconsideredforrenderingunevenandhoneycombedsurfaceonly.Newlylaid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)I.NO.24.16 |
| 14 | Item No 14. Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.I No.26.33 |
| 15 | Item No 15.Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar 1:6 in superstructure including striking joints, raking out joints, wateringandscaffolding etc. CompleteI.NO.27.05 |
| 16 | Item No 16.Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete SSR I.NO.39.01 |
| 17 | Item No 17.Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete.I.NO.21.37 |
| 18 | Item No 18. Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:4withoutneerufinish,toconcrete,bricksurface,inallpositionsincludingscaffoldingandcuring etc.complete.I.NO.32.07 |
| 19 | Item No 19. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. |
| 20 | Item No 20. ProvidingandfixingCountrycutteakwooddoubleorsingleleafsecondclassfully panelleddoorshutterwith35mmthickstyleandrailwith25mmthickpanelswith openable fan light as per detaileddrawings. Excluding the door frame 60mm x 100mm stainless steel fixtures andfasteningandfinishingthewoodworkwithoilpainting3coats.(Excludingthedoor frame) I.No.39.04 |
| 21 | Item No 21.ProvidingandfixingCountrycutteakwoodwindowswithdoubleleaf25mmthick plankedshutters without ventilators as per detailed drawings including stainless steelfixturesand fastenings and finishing the wood work with oil painting 3 coats etc. complete I.NO.39.17 |
| 22 | Item No 22.Providing and fixing 22 B.W.G. plain FRP sheets on top of weather shed, including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70x 45 mm to be paid separately) I.NO.39.89 |
| 23 | Item No 23.Providingand layingCast in situ/Ready Mix cement concretein M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. pardi of required thickness including steelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing androugheningthemif special finish is to be provided and curing complete.(Excluding reinforcement andstructural steel).with fully automatic micro processor based PLC with SCADA enabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).I.NO.26.17 |
| 24 | Item No 24.Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.I.NO.40.01 |
| 25 | Item No 25.Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick andrequiredwidthwideinplain/diamondpatternonabedof1:6C.M.includingcementfloat,filling joints, with neat cement slurry, curing, polishing and cleaning etc. complete.I.NO.33.04 |
| 26 | Item No 26.Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to605mm x590mm to 605mm of8to10mm thicknessandconfirming to IS. 15622-2006( groupBla) of approvedmake, shade andpatternforflooring inrequired positionlaidonabedof 1:4 cement mortar including neat cement float, filling joints,curingandclearing etc. complete.PWD SSR I.NO.33.40 |
| 27 | Item No 27.Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete I.NO.33.41 |
| 28 | Item No 28.Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. SSR I.No. 42.33 |
| 29 | Item No 29.Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.SSR I.No. 41.40 |
| 30 | Item No 30.Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters SSR I.No. 42.53 |
| 31 | Item No. 31.Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR I.No. 42.56 |
| 32 | Item No. 32.Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR I.No. 42.57 |
| 33 | Item No 33.Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete.NOTE: ForItem Number 15 to 18 prior approval of Superintending Engineer will be necessary I.NO.35.26 |
| 34 | Item No 34.Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.I.NO.36.13 |
| 35 | Item No 35.Providing and applying two coats (exterior quality)of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat)I.NO.35.11 |
| 36 | Providingandfixingboarddisplayinginformation,suchas\"Nameof work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge(1.25mm)thickmildsteelsheetpaintedwithonecoatof Zinc chromate stoving primer and two coats of enamel paint on front sideandgreystoveenamelonbacksideandborder/messages/ symbols etc. with approved colour shade paint complete, on M.S.angleofsize35x35x3mmframewithproperlycrossbraced M.S.anglesofsize35mmx35mmx3mmdulypaintedincludingTwo M.S.angleironpostsofsize65mmx65mmx6mm,3.65mlong painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (Item No. No. 6.36) |
| 37 | Add For Royalty Charges |
| 38 | Add For Testing |
| 39 | Add For Insurance |
| 40 | Add For GST |
