|
| 1 | Warehouse |
| 2 | Excavationforfoundationinearth,soilofalltypes,sand, gravelandsoftmurum,includingremovingtheexcavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Lift upto 1.5 m.) By Mechanical Means ( S.S.R. OF 2022-23I.No. 21.02 P.No. 153) |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessarybackfilling,ramming,wateringincludingshoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means ( S.S.R. I.No. 21.06 P.No. 153 ) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finishistobeprovided,finishingifrequiredandcuring complete,withfullyautomaticmicroprocessorbasedPLC withSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete.With fineaggregate(NaturalSand/CrushedsandVSIGradefinely (S. e-S.S.R. I.No. 24.01 P.No. 175 ) |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailingoutwater,Steelcentering,formwork,coverblocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcementandstructuralsteel)etc.complete,withfully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. ( S- S.S.R. I.No. 25.13, P.No. 178) |
| 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( S- S.S.R. I.No. 25.33, P.No. 180) |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( S- S.S.R. I.No. 25.52, P.No. 181) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade) ( S.S.R. I.No. 25.72, P.No. 182) |
| 9 | Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajjaas per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (S.S.R.I.No. 26.07, P.No. 184 ) |
| 10 | Providing and fixing in position TMT-FE-500 bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings, foundations, slabs,beams, columns ,canopies, staircase, newels,chajjas, lintels, pardis, copings, fins,arches etc. as per detaileddesigns,drawingsandschedules.includingcutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete ( S.S.R. I.No.26.33, P.No. 188) |
| 11 | Providing soling using 80mm. size trap metal in 15cm. layer including filling voids with crused sand/grit, ramming, watering etc. complete. Spec. no. As directed by Engineer in charge . ( S.S.R. I.No.21.40 P.No. 157) |
| 12 | Filling in plinth and floors with contractors material/ brought from out side and approved by Engineer incharge in layers of 15cmto20cmincludingwateringandcompactionetc. Complete (Spec.No.Bd.A.11 page No.263) (S.S.R.I.No. 21.37, P.No. 157 ) |
| 13 | Providing masonrywith conventional/ IndianStandard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, raking out joints onexposedfacesandwateringcomplete.(Spec.No.Bd.G.1 page No.313) (S.S.R.I.No. 27.01, P.No.197) |
| 14 | Providing masonrywith conventional/ IndianStandard type bricks in cement mortar 1:6 in superstructure including strikingjoints,rakingoutjoints,wateringandscaffolding complete. (Spec.No.Bd.G.5 page No.315) (S.S.R.I.No. 27.05, P.No. 197 ) |
| 15 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Spe. No. :Bd.L.1 Page (S.S.R.I.No. 32.01, P.No. 209) |
| 16 | Providing internal cement plaster 20 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spe. No. :Bd. L.2 Page No. 368 ( S.S.R. I. No. 32.06 P. No. 209 ) |
| 17 | Providingsandfacedplasterexternallyincementmortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat1kgpercementbagcuringthe same for not less than 2 days and keeping the surface of the base coatroughtoreceivethe sandfacedtreatment6to8 mm thick in cement mortar 1:4 finishing the surface by taking outgrainsandcuringforfourteendaysscaffolding (S.S.R. I. No. 32.11 P. 209)etc.complete. Spec. :Bd.L.7 Page No. 369 |
| 18 | Providing and laying in situ cement concrete M20 with tremix treatmentfor100mmthicknessforflooringwithgroove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete (S.S.R. I. No. 33.30 P. 216 ) |
| 19 | Providingandapplyingwhite-washintwocoatsonold/new plasteredormasonrysurfacesandasbestoscementsheets includingscaffoldingandpreparingthesurfacebybrushing and brooming down etc. complete. (S.S.R. I. No. 36.03 P. 227 ) |
| 20 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coat includingscaffolding,preparingthesurfaces.(excludingthe primer coat.) etc. complete.Spec. No. :Bd. P.5 Page No. 413 (S.S.R.I.No. 36.11, P. No. 227) |
| 21 | Providingandapplyingtwocoatsofexteriorweathershield paint of approved manufacture and of approved colour to the plasteredsurfacesincludingcleaning,preparingtheplaster surface,applyingprimercoat,scaffoldingifnecessary,and watering the surface for (S.S.R.I.No. 35.26, P. No. 225) |
| 22 | Providingandfixinginpositionpowdercoatedaluminium louveredwindows/ventilatorofvarioussizeswithpowder coatingasperdetaileddrawingandspecificationsincluding aluminium frames 80x 38mm x1.22 mm box type,5 mm thick sheet glass louvers, of approved quality etc. complete.(S.S.R. I.No.39.68 P. No. 259) |
| 23 | Providing and fixing rolling shutter fabricated from steel laths ofminimumthickness0.9mmwithlockplateof3.15mm thicknessreinforcedwith35x35x5mmanglesectionfitted with sliding bolts and handles for both sides, deep M.S.channelsectionofdepthandthicknessnotlessthan 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm (S.S.R. I.No. 39.25P. No. 249) |
| 24 | Warehouse PEB |
| 25 | Structural Steel E-350 - Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in positionwelded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost ofbolts,nuts, washers, welding and electrodes required for the (S.S.R. I.No.23.01 P. No.129) |
| 26 | Structural Steel - Cold Formed Light gauged - Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position. (S.S.R. I.No.23.01 P. No.129) |
| 27 | Sheeting PPGL 0.5 mm thk Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories. |
| 28 | Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- (S.S.R. I.No.16 P. No.373) |
| 29 | CORNER FLASHING |
| 30 | Center Ridge |
| 31 | Gable flashing |
| 32 | Roof Gutter (Assumed Girth- 600 mm) PPGI 0.5 mm Thk. - Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge / (S.S.R. I.No.16 P. No.373) |
| 33 | Downtake Pipe - Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (S.S.R. I.No.16 P. No.373) |
| 34 | Polycarbonate Sheet - Supply & Fixing of 2mm thkpolycarbonate sheets as per drawing & as directed by engineer in-charge.(S.S.R. I.No.51.187 P. No.293) |
| 35 | Turbo Ventilator - Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020mtr wide & 1.7 mtr long. (S.S.R. I.No.42 P. No.374) |
| 36 | Warehouse Internal Road |
| 37 | Excavation for roadway inearth,soilof allsorts,sand, gravelorsoftmurumincludingdressingsectiontothe requiredgrade,camberandsideslopesandconveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed |
| 38 | Providingsolingusing80mm.sizetrapmetalin15cm. layer including filling voids with crused sand/grit, ramming, watering etc. complete. Spec. no. As directed |
| 39 | Spreading 80 mm trap stone metalincluding sectioning as directed etc. complete. |
| 40 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete |
| 41 | Spreadinghardmurum/softmurrum/gravelorkankar for side width complete |
| 42 | Compactingthesubgrade/gravel/oversizemetal(200 mmloose)layersforallwidthwithVibratoryroller havingweight8to10MT.includingnecessary,labour, materials and artificial watering complete |
| 43 | Compacting the hard murum side widths including laying inlayersoneachsidewithvibratoryrollerincluding artificial watering etc. complete. |
| 44 | Warehouse Electrification |
| 45 | Supplying,erecting&terminatingXLPEarmouredcable3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe |
| 46 | Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR |
| 47 | Supplying& erecting mainsPVCunarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcopper |
| 48 | Supplying&erectingweatherproofpowder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C.B.withindustrial two pin plug socket 10 A and 3 pinplugtop10A with top cover necessary |
| 49 | ProvidingpointwiringforstreetlightwithPVC unarmoured cable1100VoltgradeISImark3core1.5 sqmm stranded /solidcoppererectedonwallwithG. I. Saddledulypainted@0,25mC/Crigidlygroutedinthe wallwiththehelpofplatedscrewincluding4”x4”M.S. |
| 50 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 51 | SupplyinganderectingLEDstreetlightfittingsuitablefor 20to 25W, with PF > 0.95 class IP 65 and above housingof pressurediecastaluminiumalloyandheat sinkextruded aluminium completeas perspecification No |
| 52 | Supplyingand erectingstreet lightWall bracketmade from40mm.dia‘B’classG.I.pipe1.2mintotallength complete as per specification no. FG-BKT/WB |
| 53 | Providingearthing withgalvanized ironearth platesize 60 x 60 x 0.6 cm complete with all materials, testing &recording the results as per specification no. EA-EP |
| 54 | Providingpipetypeearthingwith40mm.dia.G.l.pipeor 20mmdia.G.l.Rodcompletewithallmaterials as per specification no. EA-EP |
| 55 | Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 56 | Supplying, erecting & marking SPMCB 6A to32A, B- series(forlighting)inprovideddistributionboardasper specification no. SW-SWR/MCB |
| 57 | SupplyinganderectingGIsheet1.6mm(16SWG)to beused for fabrication of boxes panel boards etc. including cutting,bending,drilling,welding,rivetingetc. andpainting with one coat of red lead paint and 2 coats of |
| 58 | Supplyinganderectingmarineplywood18/19mmthick fixedto walloron providedpanelboardwith necessary materialssuchasscrews,wallfasteners,supports, nut bolts etc. complete. |
| 59 | Supplying and erecting triple pole and neutral distribution board(TPNDB)surface/flushmounted suitableforSPMCB of 12 ways on iron / GI frame |
| 60 | Supplying&erecting18guageM.S.Boxpowder coated (4\"x4\") 3 way for mains connection. |
| 61 | Supplyingshockprooftypehandlampwithlampholder, bulb/lamp 100 W guarded glassand 30mtr. 3core PVC flexible cord with hand shield type 3 pin 6 Amp. Plug |
| 62 | Supplyingand erectingstreet lightWall bracketmade from25mm.dia‘B’classG.I.pipe1.2mintotallength complete as per specification no. FG-BKT/WB |
| 63 | Warehouse Royalty |
| 64 | METAL |
| 65 | MURUM |
| 66 | Warehouse Testing |
| 67 | BASIC TEST OF AGGREGATE |
| 68 | a)WaterAbsorption,SpecificGravity,ImpactValue, Crushing Value. |
| 69 | b) Sieve Analysis. |
| 70 | c) Abrasion Value. |
| 71 | d) Flakiness Index & Elongation Index. |
| 72 | BRICKS a) Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). |
| 73 | CONCRETE |
| 74 | a) Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 75 | b)ConcreteMixDesign(WithallTestsonbasic materials) M -25 |
| 76 | STEEL a) Steel bar testing upto 16 mm (set of 3 bars) (Tensile strength, %, Elongation, Yield Stress,Weight-PerMeter,Bend/RebendTest,Proof Stress.) |
| 77 | Shed |
| 78 | Excavationforfoundationinearth,soilofalltypes,sand, gravelandsoftmurum,includingremovingtheexcavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Lift upto 1.5 m.) By Mechanical Means ( S.S.R. OF 2022-23I.No. 21.02 P.No. 153) |
| 79 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessarybackfilling,ramming,wateringincludingshoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means ( S.S.R. I.No. 21.06 P.No. 153 ) |
| 80 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finishistobeprovided,finishingifrequiredandcuring complete,withfullyautomaticmicroprocessorbasedPLC withSCADAenabledreversibleDrumTypemixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate(NaturalSand/CrushedsandVSIGradefinely (S. e-S.S.R. I.No. 24.01 P.No. 175 ) |
| 81 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap /granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailingoutwater,Steelcentering,formwork,coverblocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcementandstructuralsteel)etc.complete,withfully automatic microprocessorbasedPLCwithSCADAenabledreversibleDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc.( S- S.S.R. I.No. 25.13, P.No. 178) |
| 82 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete. With fine aggregate (Crushed sand VSI Grade)( S- S.S.R. I.No. 25.33, P.No. 180) |
| 83 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) ( S- S.S.R. I.No. 25.52, P.No. 181) |
| 84 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.( S.S.R. I.No. 25.72, P.No. 182)complete. With fine aggregate (Crushed sand VSI Grade) |
| 85 | Providing and laying Cast in situ/Ready Mixcement concrete M- 25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajjaas per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (S.S.R.I.No. 26.07, P.No. 184 ) |
| 86 | Providing and fixing in position TMT-FE-500 bar reinforcement ofvariousdiametersforR.C.C.pilecaps,footings, foundations, slabs,beams, columns ,canopies, staircase, newels,chajjas, lintels, pardis, copings, fins,arches etc. as per detaileddesigns,drawingsandschedules.includingcutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete ( S.S.R. I.No.26.33, P.No. 188) |
| 87 | Filling in plinth and floors with contractors material/ brought from out side and approved by Engineer incharge in layers of15cmto20cmincludingwateringandcompactionetc. Complete (Spec.No.Bd.A.11 page No.263) (S.S.R.I.No. 21.37, P.No. 157 ) |
| 88 | Providing masonrywith conventional/ IndianStandard type bricks in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces, raking out joints onexposedfacesandwateringcomplete.(Spec.No.Bd.G.1page No.313) (S.S.R.I.No. 27.01, P.No.197) |
| 89 | Providing masonrywith conventional/ IndianStandard type bricks in cement mortar 1:6 in superstructure including strikingjoints,rakingoutjoints,wateringandscaffolding complete. (Spec.No.Bd.G.5 page No.315) (S.S.R.I.No. 27.05, P.No. 197 ) |
| 90 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.Spe. No. :Bd.L.1 Page (S.S.R.I.No. 32.01, P.No. 209) |
| 91 | Providing internal cement plaster 20 mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spe. No. :Bd. L.2 Page No. 368 ( S.S.R. I. No. 32.06 P. No. 209 ) |
| 92 | Providingsandfacedplasterexternallyincementmortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat1kgpercementbagcuringthe same for not less than 2 days and keeping the surface of the base coatroughtoreceivethe sandfacedtreatment6to8 mm thick in cement mortar 1:4 finishing the surface by taking outgrainsandcuringforfourteendaysscaffoldingetc.complete. Spec. :Bd.L.7 Page No. 369 (S.S.R. I. No. 32.11 P. 209) |
| 93 | Providing and laying in situ cement concrete M20 with tremix treatmentfor100mmthicknessforflooringwithgroove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete (S.S.R. I. No. 33.30 P. 216 ) |
| 94 | Providingandapplyingwhite-washintwocoatsonold/new plasteredormasonrysurfacesandasbestoscementsheets includingscaffoldingandpreparingthesurfacebybrushing and brooming down etc. complete.(S.S.R. I. No. 36.03 P. 227 ) |
| 95 | Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coat includingscaffolding,preparingthesurfaces.(excludingthe primer coat.) etc. complete.Spec. No. :Bd. P.5 Page No. 413 (S.S.R.I.No. 36.11, P. No. 227) |
| 96 | Providingandapplyingtwocoatsofexteriorweathershield paint of approved manufacture and of approved colour to the plasteredsurfacesincludingcleaning,preparingtheplaster surface,applyingprimercoat,scaffoldingifnecessary,and watering the surface for (S.S.R.I.No. 35.26, P. No. 225) |
| 97 | Providingandfixinginpositionpowdercoatedaluminium louveredwindows/ventilatorofvarioussizeswithpowder coatingasperdetaileddrawingandspecificationsincluding aluminium frames 80x 38mm x1.22 mm box type,5 mm thick sheet glass louvers, of approved quality etc. complete.(S.S.R. I.No.39.68 P. No. 259) |
| 98 | Providing and fixing rolling shutter fabricated from steel laths ofminimumthickness0.9mmwithlockplateof3.15mm thicknessreinforcedwith35x35x5mmanglesectionfitted with sliding bolts and handles for both sides, deep M.S.channelsectionofdepthandthicknessnotlessthan 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm (S.S.R. I.No. 39.25P. No. 249) |
| 99 | Shed PEB |
| 100 | Structural Steel E-350Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in positionwelded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost ofbolts,nuts, washers, welding and electrodes required for the (S.S.R. I.No.23.01 P. No.129) |
| 101 | ProvidingandfixingcolourcoatedZincalume(R)AZ150(min150gms/sq.mt.totaloneachside)profiledsheetsforroofing.Thefeedmaterialismanufacturedoutofnominal0.45mmBaseMetalThickness(BMT)(0.5mmTCT),Hi strength steel withmin.550M Payieldstrength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium43.4%zinc1.6%silicon)with COLORBOND(R)steel quality super durable polyester paintcoat(withinorganicpigment).The paint shall have a total coating thickness of nominal 35um, comprising of nominal 25 umexteriorcoatontopsurfaceandnominal10umreversecoatonbacksurface.Profilesheetshallhavenom.950-1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubtlesquareflutinginthefivepanatnominal180-250mmcenter-to-center.Theendribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeedmaterialshouldhavecoilmanufacturersproductdetailsmarkedaregularinterval.Includingfastenerswithmin.fastenedwithmin.25um Zinc-Tin alloy coated, Hex head, self-drilling screw etc.(S.S.R. I.No.38.34 P. No.173) |
| 102 | Shed Elelctrification |
| 103 | Supplying,erecting&terminatingXLPEarmouredcable3 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12SWG)G.I.earthwirecompleteerectedwithglands& lugs, on wall/ trusses/ pole or laid in provided trench/ pipe |
| 104 | Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXNCTR |
| 105 | Supplying& erecting mainsPVCunarmoured cable 1100Volt gradeISImark3core/2.5sqmmstranded/solidcopper |
| 106 | Supplying&erectingweatherproofpowder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C.B.withindustrial two pin plug socket 10 A and 3 pinplugtop10A with top cover necessary |
| 107 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. |
| 108 | Supplyingand erectingstreet lightWall bracketmade from40mm.dia‘B’classG.I.pipe1.2mintotallength complete as per specification no. FG-BKT/WB |
| 109 | Providingearthing withgalvanized ironearth platesize 60 x 60 x 0.6 cm complete with all materials, testing &recording the results as per specification no. EA-EP |
| 110 | Providingpipetypeearthingwith40mm.dia.G.l.pipeor 20mmdia.G.l.Rodcompletewithallmaterials as per specification no. EA-EP |
| 111 | Supplying, erecting & marking DPMCB 6A to 32A,C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB |
| 112 | Supplying, erecting & marking SPMCB 6A to32A, B- series(forlighting)inprovideddistributionboardasper specification no. SW-SWR/MCB |
| 113 | SupplyinganderectingGIsheet1.6mm(16SWG)to beused for fabrication of boxes panel boards etc. including cutting,bending,drilling,welding,rivetingetc. andpainting with one coat of red lead paint and 2 coats of |
| 114 | Supplyinganderectingmarineplywood18/19mmthick fixedto walloron providedpanelboardwith necessary materialssuchasscrews,wallfasteners,supports, nut bolts etc. complete. |
| 115 | Supplying&erecting18guageM.S.Boxpowdercoated (4\"x4\") 3 way for mains connection. |
| 116 | Supplyingand erectingstreet lightWall bracketmadefrom25mm.dia‘B’classG.I.pipe1.2mintotallength complete as per specification no. FG-BKT/WB |
| 117 | Management Strategies and Implementation Plan (MSIP) to manage the Environmental, Social, Health and Safety (ESHS) risks and ESHS Code of Conduct |
