tender for Various Civil Repairs And Other Works At The Bida Office.- 1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 400 Sqm 235.00 94000.00 INR Ninety Four Thousand & Paise Zero Only 2 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: 2.1 Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 2400 Sqm 80 192000.00 INR One Lakh Ninety Two Thousand & Paise Zero Only 2.2 Old work (One or more coats ) 3000 Sqm 40 120000.00 INR One Lakh Twenty Thousand & Paise Zero Only 3 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 4500 Sqm 86 387000.00 INR Three Lakh Eighty Seven Thousand & Paise Zero Only 4 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 4 (1 cement : 4 coarse sand) 10 Cum 5196 51960.00 INR Fifty One Thousand Nine Hundred Sixty & Paise Zero Only 5 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate 20 Each 1426 28520.00 INR Twenty Eight Thousand Five Hundred Twenty & Paise Zero Only 6 Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 1000 Rmt 78 78000.00 INR Seventy Eight Thousand & Paise Zero Only 7 S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. 50 Sqm 925 46250.00 INR Forty Six Thousand Two Hundred Fifty & Paise Zero Only 8 Providing and fixing to existing door frames 24mm thick factory made PVC door shutters made of stiles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm +/- 0.2 mm with inbuilt edging on both sides.The stiles and rails mitred and joined at the corners by means of M.S.galvanized/plastic brackets of size 75x220mm having wall thickness 1.0mm+/- 0.1mm and stainless steel screws. The stiles of the shutter reinforced by inserting galvanized M.S.tube of size 20x20mm and 1mm +/- 0.1mm wall thickness. The lock rail made up of ‘H’ section,a uPVC hollow section of size 100x24mm and 2mm +/- 0.2mm wall thickness fixed to the shutter stiles by means of plastic/ galvanized M.S.’U’ cleats.The shutter frame fitted with a uPVC multishambered single panel of size not less than 610mm, having overall thickness of 20mm and 1mm +/- 0.1mm wall thickness. The panels fitted vertically and tie bar at two places by inserting horizontally 6mm galvanized M.S.rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge (For W.C.and bathroom door shutter). 25 Sqm 1761 44025.00 INR Forty Four Thousand Twenty Five & Paise Zero Only 9 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 35 Sqm 674 23590.00 INR Twenty Three Thousand Five Hundred Ninety & Paise Zero Only 10 Stone work (machine cut edges) for Wall cladding/ Veneering work up to 10 m height with 20 to 30 mm thick Pink Sand stone (Bansi Paharpur) and backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid separately).Exposed face Machine cut 50 Sqm 2536 126800.00 INR One Lakh Twenty Six Thousand Eight Hundred & Paise Zero Only 11 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 100 Sqm 220 22000.00 INR Twenty Two Thousand & Paise Zero Only 12 Repair of door, window shutters including cost of material and labour for change of damaged : 12.1 Aldrop of mild Steel 8 long x 10mm dia 15 Each 106 1590.00 INR One Thousand Five Hundred Ninety & Paise Zero Only 12.2 Stopper of Aluminium with Double Rubber Gutka 16 Each 47 752.00 INR Seven Hundred Fifty Two & Paise Zero Only 12.3 Steel Hinges For Wooden Chowkhat 3 size. 10 Each 24 240.00 INR Two Hundred Forty & Paise Zero Only 12.4 Mild Steel Tower Bolt 6 long 12 Each 39 468.00 INR Four Hundred Sixty Eight & Paise Zero Only 12.5 Steel Handle 6 size 30 Each 24 720.00 INR Seven Hundred Twenty & Paise Zero Only 13 Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete. 200 Sqm 121 24200.00 INR Twenty Four Thousand Two Hundred & Paise Zero Only 14 Removing and re-fixing of wash hand basin including all necessary fittings.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
