Tender For Addn/Altn To Civilian Md Accommodation And Certain Minor Works At Afs Yelahanka; 1 Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)of any description and in any position not otherwise specifically provided for complete all as specified and directed. 2 Demolition of plain cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. 3 Demolition of brick work or stone masonry built in CM including all quoins complete all as specified and directed. 4 Demolition and breaking up drain pipes internal dia of pipe in 150mm (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed. 5 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 6 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed. 7 M & L Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed. 8 Taking down cement plaster from brick or stone including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description complete all as specified and directed. 9 Taking down door chowkhats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. 10 Taking down door chowkhats or frames exceeding 1.50 sqm but not exceeding 4.00 sqm complete all as specified and directed. 11 Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm, complete all as specified and directed. 12 M&L for taking down shutters of any description exc 2sqm each and refixing in the same opening complete all as specified and directed. 13 Taking up or down 15mm size steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 14 Taking up or down 20mm size steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 15 Taking up or down 25mm size steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 16 Taking up or down 40mm size steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. 17 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard dense soil complete all as specified and as directed. 18 M&L for Excavating in post holes (or similar holes)in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. 19 Excavation in trenchesin soft/loose soilnot exc.1.50 m wide and not exc.1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out complete all as specified and directed. 20 Excavation in trenches in hard/dense soil not exceeding 1.5 m width and not exceeding 1.5 m deep for laying of pipes in Hard/dense soil etc and getting out complete all as specified and directed. 21 Returning filling in excavated soil upto a depth of 30 cm after riddling of excavated soil (in lieu of sand) for cushioning of cable and refilling of trenches with left over normal excavated soil including spreading, leveling, watering and well ramming in layers complete all as specified and as directed. 22 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soft / loose/hard/densesoil complete all as specified and directed. 23 Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. 24 M & L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed. 25 M&L for reinforced cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregates) as in shelvescomplete all as specified and directed. 26 M&L for plain cement concrete 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 27 M&L for precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) blockmasonry with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed. 28 M & L for cement concrete 1:4:8, Type D-2 (Using 40 mm graded stone aggregates) in foundations etc complete all as specified and directed. 29 M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. 30 M&L for brick work with sub class B bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick complete all as specified and directed. 31 Cutting holes in brick walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B0) using 12.5 mm graded aggregate, depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. 32 M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixingedges will be painted to match with prelam sheet complete all as specified and directed. 33 M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including necessary fittings etc complete all as specified and directed. 34 S&F 35mm thick Factory made solid WPC decorative type (Wood plastic composite) Wire mesh door shutter with S.S wire meshin any number of division with brown wood grain texture, including s.s wire mesh shall be fixed with 15x15 square tube in side rails with screwing 8x28 heat metal zinc coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be 650 or as per manufacture instruction complete all as specified and directed. Note. Material test certificate and authentication should be compulsory provided by the manufacturing company. 35 S&F of pully operated clothes drying system pully it 6 feet (with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of delrin with rope guide mounted on channel pair of length 24(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyster braided undyed of 3.5+0.50 mm dia complete all as specified and directed. 36 S&F for 2mm thick fibre glass reinforced translucent plain colour sheeting fixed with coach screw and washer in roof, wall and angle iron etc complete all as specified and directed. 37 M & L for 600 x 600mm false ceiling tiles (Gypsum board of decorative type) of 9mm thick with powder coatedmain tee of size 24 x 32 mm, having 0.27mm x0.25 mm gauge @ 1200mm c/c rotary stitched cross tee size of 24 x27 mm, gauge 27 mm and cross tee of size 24 x 27 mm having 0.25 mm gauge @ 1200 mm c/c and angle of size 19 x 19 mm gauge 0.35 mm fixed on periphery of wall and all above grids are suspended at every 1200 mm c/c in both direction by 2mm thick GI wire and all as per manufacture instructions complete all as specified and directed. 38 M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required Dia complete all as specified and directed.(M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 39 All as per item No 38 above but double extruded WPC ofFrame size 50 x 125 mm complete all as specified and directed. 40 S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. 41 S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. 42 S&Ffor brass, sliding door bolt 250 mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. 43 S&F for brass, barrel tower bolt 150mm with cast or sheet barrel and of extruded section rolled or cast bolts and fixed complete all as specified and directed. 44 S&F for extruded brass handle 150mm fabricated type polished complete all as specified and directed. 45 S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. 46 S&F Brass 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed. 47 S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. 48 S&F for aluminium powder coated drapery rod 32mm dia fixed with suitable bracket complete all as specified and directed.(Note: Bracket will be measured and paid separately) 49 S&F aluminium powder coatedfancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws including necessary drilling & finished with polishing.Each opening shall have two fillets at both ends complete all as specified and directed. 50 M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and prelaminated side with different design and other side plain white of density not less than 600kg/cum,should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity and complete all as specified and directed. 51 S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. 52 S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. 53 S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. 54 S&F auto closing hinges 35mm of 0 crank forkitchen cabinet and cupboard shutter fixturesand all as specified and as directed. 55 S&F for stainless steel size 200 mm long D type rounded type drawer wardrobe handle complete all as specified and as directed. 56 S&F for stainless steel size 300 mm long D type Square type wardrobe/door handle complete all as specified and as directed. 57 M&L for stainless steel size 1000/900mm x 40mm x 40 mm oval type hanging rod with end brackets for cupboard (Wt. not less than 370 g) complete all as specified and as directed. 58 S&F for 600mm long telescopic channels,rollers for smooth sliding of drawers complete all as specified and directed. 59 M&L for Door closer hydraulically regulated, aluminiumbody, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified and directed. 60 S & F Mortice lock, aluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified and directed. 61 S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows andventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron complete all as specified and directed. 62 S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified. 63 S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 64 M&L TMT bars 6 to 8mm dia and over cut to length bent to shape required including cranking spirally for hooking ends and binding with and including MS wire annealed n.less than 0.9mm dia complete all as specified and directed. 65 Supply only Chain Link MS galvanised fencing, any size or type, complete all as specified and directed. 66 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. 67 S&F posts and struts in fencing including cutting tops to shapes as directed, drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-290 Gde E-165) complete all as specified and directed. 68 S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long dia of shank, diameter of neck in 5 to 10 mm complete all as specified and directed. 69 S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges powder coated aluminium snap beading screws etc complete all as specified and directed. 70 S & F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed. 71 S&F of Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 72 M & L for 100 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) finishing smooth & even with using extra cement complete all as specified and directed. 73 M&L for 75 mm thick plain cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) for plinth protection complete all as specified and directed. 74 M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for thickness of slab 100mm below complete all as specified and directed. 75 M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,in floors etc, laid in with 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified directed. 76 M&L for Glazed coloured ceramic tiles of size 450x300X7 mm thick set and jointed in neat cement slurry including matching PVC corner beading and pointed in white or colour cement to matchas in skirting/dado including and over 10 mm thick rendering in CM 1:4 finished fair to receive tiles complete all as specified and directed. 77 M&Lfor Non skid coloured ceramic tiles 7 to 8 mm thickmatt finish(square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed. 78 M&L for 20mm thickGranite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, cooking platforms and including 20mm thick cement mortar (1:4) including pointing in white cement (tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone using marble dust with admixture of pigment to match including rounding and polishing to edges of granite slab complete all as specified and directed. 79 S&F for polished Sadarahalli stone slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staircase including rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and as directed. 80 S&F 20 to 22mm thick polished sadarahalli stone tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 including rounding, nosing, polishing and groove cutting to edges of granite slab complete all as specified and directed. 81 M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal wallscomplete all as specified and directed. 82 M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on external wall complete all as specified and directed. 83 M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble complete all as specified and directed. 84 S&F black tinted sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator complete all as specified and directed. 85 All as per item No. 84 above but figured glass pin head type complete all as specified and directed. 86 S&F black tinted sheet glass ordinary quality 4mm thick as in doors, windows, showcase in aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. 87 M&L for new wall surface applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. by skilled labour as per following steps complete all as specified and directed.(a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI.(c ) Allow 6-8 hrs time to dry the putty surface. 88 M&L for new wall surface applying two coats of cement base paint over one coat of wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed. 89 Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having Dia of 7/9 to make the surface free from dust, loose paint etc by skilled labour and applying waterproof cement based putty @ 300 Gm (undiluted) per Sqm of average thickness 1 mm over the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust and applying two coats of oil bound emulsion distemper over one coat of interior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying oil emulsion should be able to spray in hard to reach area and penetration of oil emulsion on the surface etc. by skilled labour as per following steps complete all as specified and directed:-(a) Mix the putty powder by adding water as per manufacturer instructions and mix with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 litres per minutes with a maximum pressure 3300 PSI.(c ) Allow 6-8 hrs time to dry the putty surface. 90 Complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having Dia of 7/9 to make the surface free from dust, loose paint etc by skilled labour and applyingtwo coats of cement base paint over one coat of exterior wall primer using airless spray technology with max two working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to spray in hard to reach area and penetration of acrylic emulsion on the surface etc. by skilled labour as per manufacturer instructions complete all as specified and directed. 91 M&L forpreparation of new plastered surfaces and applying two coats of Oil bound distemper on wall surface including 3 mm thick wall care putty complete all as specified and directed. 92 M&L for preparation of old decorated ceiling surface and applying two coat of distemper oil emulsion (OBD) complete all as specified and directed. 93 M&L for preparation of old decorated wall surface and applying two coat of white wash complete all as specified and directed. 94 M&L for preparation of old painted wooden surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Painting complete all as specified and directed. 95 M&L for preparation of new or previously untreated surfaces of steel and iron of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer complete all as specified and directed. 96 M&L for preparation of old painted steel surface of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel Painting complete all as specified and directed. 97 M&L for writing letters or figures (Block, Roman, italic or Indian) n exc 30 cm height etc. complete all as specified and directed. 98 M&L for Writing stops, commas, short lines dashes, hyphens, brackets, etc., complete all as specified and directed. 99 S&F in repairs 15mm Dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unionscomplete all as specified and directed. Note:(ARI-CHR-39053 of make JAQUAR or Equivalent make in PS). 100 S&F in repairs 15 mm Dia two waybib taps (fancy type), cast copper alloy with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Note:(CON-CHR-083 FTK of make JAQUAR or Equivalent make in PS). 101 S&F in repairs Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified and directed.Note: FON-CHR40037 of make JAQUAR or Equivalent make in PS. 102 Supply only Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks fly nuts ,screwed for iron pipeand fixed completed all as specified. 103 S&F in repairs Brass CP wall Mixer 2 in 1 for hot and cold water screwed down for iron pipe and fixed for 15 mm Dia complete all as specified and directed. Make: Cat part No FLR- CHR-5273UPR ofJAQUAR or Equivalent make in PS. 104 S&F in repairs Brass CPcentre hole Mixerfor hot and cold water screwed down for iron pipe and fixed for 15 mm Dia complete all as specified and directed.Note:(FLR-5169NB of make JAQUAR or Equivalent make in PS). 105 S&F in repairs 25mm Dia, Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe all as specified and directed. 106 S&F in repairs 40mm Dia, Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe all as specified and directed. 107 S&F in repairs 20mm Dia, Gun-metal, globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe all as specified and directed. 108 S&F in repairs Ball valves of 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed along with all necessary fittings like nipple, socket, etc complete all as specified and directed. 109 S&F in repairs sink cock fancy type and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Note:(FLR-CHR-5347N of make JAQUAR or Equivalent make in PS). 110 S&F in repairs Towel Rack with lower hanger(stainless steel), fixed with screws, complete all as specified and directed.Note: Make Jaguar (Code No AHS-1581H) or Equivalent make in PS. 111 S&F of 32/40mm waste pipe for wash hand basin and sink complete all as specified and as directed. 112 S&F in repairs Stainless steel Soap dish fix to wall complete all as specified and directed. Note: (ACN-CHR- 1131N of make JAQUAR or Equivalent make in PS). 113 S&F in repairs brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.Note:(ALD-CHR- 587 of make JAQUAR or Equivalent make in PS). 114 Supply and Fixing Stainless steel Toilet paper holder all as specified and directed.Make: Jaguar Model AKP 35753Por equivalent make in PS 115 S&F CP grating size 100mm fixed with white cement all as specified and directed. 116 S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. 117 S&F PVC Cabinet mirror of size 600 x 450 x125 mm complete all as specified and directed. 118 S&F in repairs Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directedNote: (OHS-CHR-1719 of make JAQUAR or Equivalent make in PS). 119 S&F in repairs CP Shower arm 15 mm size,195 mm long with bend of 45 degree with flange as specified and as directed.Note: (SHA-CHR- 483 FTK of make JAQUAR or Equivalent make in PS). 120 S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats complete all as specified and directed. Note : (AKP-CHR- 35711PS of make JAQUAR or Equivalent make in PS). 121 S&F in repairs corner glassshelf150mm X 150mm with assembly ofCP andfixed with Chromium plated brass screws and wooden/plastic cleats,complete allas specified and as directed.Note:(ACN-CHR- 1173 of make JAQUAR or Equivalent make in PS). 122 S&F in repairs CP Towel ring fixed with and including Chromium plated brass screws and wooden/plastic cleats,complete all as specified and as directed.Note: (ACN-CHR- 1121BN of make JAQUAR or Equivalent make in PS). 123 S&F in repairs Corner glass shelf large, 300x300mm with assembly of CP and fixed with Chromium plated brass screws and wooden/plastic cleats,complete all as specified and as directed.Note:(ACN-CHR- 1173N of make JAQUAR or Equivalent make in PS). 124 S&F in repairs glass shelf of size 12 cm wide x 60cm long for wash hand basin complete all as specified and as directed.Note:(ACN- 1171N of make JAQUAR or Equivalent make in PS). 125 S&F in repairs 1mm thick, stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed. 126 M&L for cutting of existing GI pipe 40 mm dia and provide new tee 50 x 40mm insert in the existing pipe and make a new branch for tapping the pipe complete all as specified and directed. 127 S&F in repairs of GI tubing of 20mm size in walls/ceilings or laid in floors ofmedium grade ISI marked including all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed. 128 S&F in repairs of GI tubing of 25mm size in walls/ceilings or laid in floors ofmedium grade ISI marked including all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed. 129 S&F in repairs of steel water tubing of 40mm in trenches medium grade ISI marked incl all types of fittings such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions etc and accessories complete all as specified and directed. 130 S&F GI pipe light grade of dia 40 mm diawith all fittings laid in trenches complete all as specified and as dierected. 131 S&F 20mm Dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. 132 S&F 25mm Dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. 133 S&F Rotational moulded polyethylene water storage tanks of 1000L capacity (cylindrical vertical with closed top) hoisted and fixed in position along with all necessary fittings etc including dismantling/taking down old water tanks complete all as specified and directed. 134 S&FRotational moulded polyethylene water storage tanks of 500L capacity (cylindrical vertical with closed top) hoisted and fixed in position along with all necessary fittings etcall as specified in SSR Part I complete all as specified and directed. 135 S&F 110 mm Dia PVC(SWR) Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. 136 S&F PVC (SWR) pipes 75 mmsingle socketed with inanylength with rubber ring joints, laid in trenches or in floors and walls including taking down old pipes complete all as specified and directed. 137 S&F PVC (SWR) bends 110 mm Dia in any radius with access door etc complete all as specified and directed. 138 S&F in repairs Brass chromium plated bottle traps 32 mm for wash basin and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed complete all as specified and directed. 139 S&F in repairs PVC floor trap 75mm Dia, including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed. 140 M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as bed to drain pipes, including packing under and haunching against the sides of the pipes after they are laid and tested, and including necessary formwork, for 150 mm dia bore size drain pipes, complete all as specified and directed. 141 M&L for 150mm dia reinforced concrete pipes class NP-2 for following dia of pipe laid and jointedwith collars complete all as specified and directed. 142 M&L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed. 143 S & F Vitreous China urinals, bowl type (back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) 144 S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm including sink coupling complete all as specified and directed. 145 S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. 146 S&F in repairs vitreous China squatting pan Orrisa pattern white colour of size 580x440mm with integral foot rests includingprovision of lime concrete complete all as specified and directed. 147 S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe complete all as specified and as directed.Note: (S1053121 of Cera or Equivalent make in PS) 148 S&F in repairs plastic EWC water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. 149 S&F in repairs vitreous China wash basin, white or coloured of size 550 x 400 mm including bracketscomplete all as specified and directed. 150 S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 151 S&F PVC (SWR) 75mm Dia junction (single T) equal or unequal with access door etc. complete all as specified and directed. 152 S&F PVC (SWR) bends 75 mm Dia in any radius with access door etc. complete all as specified and directed. 153 Taking down copper/aluminium point wiring (light,fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings and removing materials to store for keeping in safe custody or for taking into credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. 154 Taking down the unserviceable MCB DBs & metal clad sockets of any capacity/any type complete all as specified and directed. 155 Taking down the unserviceable MCB of any rating and any size/type complete all as specified and directed. 156 Taking down old unserviceable sub main wiring of any size complete all as specified and directed. 157 M&L forpoint wiring in PVC concealedconduit as required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade with all fittings such as elbows, bends, junction boxes, saddles including PVC board (ISI Mark) and screws and rawal plugs including 1.5 sqmmPVCinsulated & unsheathed copper conductorcable as earth wire and connected to light/fan & common earth dollywith necessary copper thimbels for One light/bell/ fan point controlled by one, one way switch complete all as specified and directed.Note: The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. 158 All as per Sl item No 157 above but for One ceiling fan/exhaust fan point controlled by one switch through modular regulator. 159 All as per Sl item No. 157 above, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board . 160 All as per item No 157above but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch complete all as specified and directed. 161 All as per item No 157above but one bell / buzzer point controlled by one push button on the same board with other switches complete all as specified and directed. 162 All as per item No 157above but for socket out let, 15/16 Amps on independent board with 2.5 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly complete all as specified and directed. 163 All as per item No 157above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 4 Sqmm for continuity earth wire connected to common earth dolly complete all as specified and directed. 164 S&F white cover plate with frame 1 module complete all as specified and directed. 165 S&F white cover plate with frame 2 module complete all as specified and directed. 166 S&F white cover plate with frame 3 module complete all as specified and directed. 167 S&F white cover plate with frame8 module complete all as specified and directed. 168 S&F modular metal flush box 1/2module complete all as specified and directed. 169 S&F modular metal flush box 3 module complete all as specified and directed. 170 S&F modular metal flush box 8 module complete all as specified and directed. 171 S&F single pole modular switch 1 way 6 Amps, 1 Module complete all as specified and directed.Note:(i) All light/ fan switches shall besymbol embossed (light/fan) typecomplete all as specified and as directed.(ii) All switches for sockets shall beLED indicator type. 172 S&F in repairs modular Socket,6 Amps- 2/3 pin combined 2 module complete all as specified and directed. 173 S&F in repairs Modular Switch 1 way 16 Amps 1 Module complete all as specified and directed. 174 S&F in repairs Modular Socket,6 A/16A, 2 Module complete all as specified and directed. 175 S&F in repairs Modular bell push 6A, 1 Module complete all as specified and directed. 176 S&F in repairs Modulartype Fan step regulator 120W type 2 module complete all as specified and directed. 177 S&F in repairs PVC ceiling rose two to three terminals complete all as specified and directed. 178 S&F in repairs ding dong bell AC, 230 volts, single pole complete all as specified and directed. 179 S&F Socket PVC, 220 Volts alongwith Plug top and MCB 20 Amps complete all as specified and directed. 180 S&F in repairs LED Tube light fitting 1 x20 W, 4 feet ,220V housing with PC diffuser box type with driver, holder including LED tube light connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and directed. 181 Supply and fix LED light fitting four feet 20 watt, slim design, 230volts, Cool white/ warm white, indoor recess mounting with reflector and connector block and complete all as specified and directed. 182 M&L for light fitting withLED batten light fitting 20 Watts 4 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. 183 M&L for light fitting with LED batten light fitting10 Watts 2 feet surface / wall mounted aluminium extrusion input voltage range 250 V, input frequency 50Hz, including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. 184 S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 185 S&F in repairs LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 186 S&F in repairs of building security light fitting complete with 35 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution complete fixed bracket made out by GI pipe 32 mm dia (lightgrade) 1.5 metre long and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector complete all as specified and directed. 187 M&L for light fitting with LED security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant, efficacycomplete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 42 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in all respect as specified and directed by engineer-in-charge.complete in all respect complete all as specified and directed. 188 M&L in repairs earthing complete with galvanised steel earth plate electrode size 600X600X6mm thickburried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including GI earth lead wire4mm dia by means of bolts, nuts, check nuts & washers ofgalvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs, GIprotection pipe of 15 mm bore light grade up to 7.5 mtr long, etc complete all as specified and directed. NOTE :-(a) GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.(b)Earthing value should be less than 5 ohms.(c)If desired value of earth resistance not achieved during testing, the earthing work shall be redone by the contractor at free of cost to achieve the desire value of earthing resistance. The rate quoted by the contractor deemed to be inclusive of the provision. 189 S & F in repairs sheet metal enclosure MCB DBSPN 8 way double doorwith 100 ampsrated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed . 190 S&F in repairs MCB DB SPN 2 way, Single door, 240 V, AC, 50 Hz, with 200Amp rated bus bar complete all as specified and directed. 191 S&F in repairs 240V, 10 KA B curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. 192 Supply and fix DB, SPN 4 way double door for MCB, 240 volt with 200 amps rated bus bar complete all as specified and directed. 193 S & F MCB 32-40 amps, 10 KA,DP 240 volt, C type with rupturing capacity 10 KA complete all as specified and as directed 194 S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA complete all as specified and as directed 195 S & FMCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KAall as specified and as directed 196 S & F MCB TPN, 63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and as directed. 197 M&L in repairs of sub main wiring in PVC Concealed conduit of required size 2x6 sqmm PVC insulated multistranded copper conductor with 01x6 Sqmm PVC insulated multistrand copper conductor as earth continuity wire complete all as specified and directed.Note:- For the purpose of payment Two runs of 6 sqmm conductors and one run of 6sqmm conductor with conduit will be measured as one length. 198 Supply and fix PVC insulated multistrand copper conductor 2.5 sqmm wire, 3 Core complete all as specified and directed. 199 S&F in repairs invertor LED 4 ft batten 20 Watt, 6500K with square profile and polycarbonate channel , lithium ION battery with charging time 8 Hours -10 Hours and backup time upto 4 hours indoor recess mounting with reflector and connector block complete all as specified and directed. 200 S&F in repairs MCCB 4 Pole 100 Amps, 25 KA, 415V, 50 HZ, ICS=100% Icu, with adjustable thermal settings, suitable for isolation complete all as specified and directed. 201 Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall after concealing the conduit in wall complete all as specified and directed. 202 Disconnecting and taking down existing Ceiling fan/ Exhaust fan of any description and hanging it on the same location and connecting up complete from ceiling rose or connector to fan after overhauling, servicing/ rewinding if required, replacement of bearing, capacityand spray painting with synthetic enamelled paint with and including addl length of hanging rods, removing unwanted paint from the rubber and walls, Including writing MES No. complete all as specified and directed. 203 S&F in repairs testing and commissioning of metering board CPRI approved outdoor type, floor mounted, factory made of Size 1mtr x 0.75 Mtrs,415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having separate compartment for bus bars chamber with aluminium bus bars duly insulated by insulation of RYB colour 300 Amps rating mounted on porcelain insulatorsand mounting for MCCB as incomer. The cubical has 04 compartments of suitable size to accommodate 04 x energy meters, panel shall be factory made, Single door, made out of 2 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5mm duly powder coated with 7 tank process with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable complete all as specified and directed. 204 M&L for taking down existing energy meter from the existing location and refixing it to recommended place after completion of work complete all as specified and directed. 205 S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed. 206 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. 207 M&L for making suitable size Core cutting on stone/Bricks wall for fixing of exhaust fan 300 mm sweep and making good to the disturbed surface complete all as specified and directed. 208 S&F Exhaust fan, plastic body AC single Phase, 230V of size 250mm sweep with, blades, and frame and louvers complete all as specified and directed. 209 Making suitable size core cutting on stone/Bricks wall for fixing of exhaust fan 250 mm sweep and making good to the disturbed surface in cement mortar 1:4 complete all as specified and directed. 210 Cutting the existingroad of suitable size for passing of UG Cable incrossing and making good the disturbed surface of road to its original specification complete all as specified and directed. 211 Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 10 Sqmm, 2 core multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed. 212 Supply and laying in trenches, LT underground cable, XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm, 2 core multistranded including cable connecting lugs, glands,jointing materials etc., laid in trenches, floors, roof, ducts and fixing using clamps, saddle for pole, wall complete all as specified and directed. 213 Supplying and laying un-reinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150mm x 40mm complete all as specified and directed. 214 M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified Note: (a) GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate(b) GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately.(c)Earthing value should be less than 5 ohms.(d)If desired value of earth resistance not achieved during testing, the earthing work shall be redone by the contractor at free of cost to achieve the desire value of earthing resistance. The rate quoted by the contractor deemed to be inclusive of the provision.
