Tender For Additional / Alternator To Certain Smqs In Saffron Enclave At Af Stn Awantipur; 1 Building Work 2 Dismentalling of plain or corrugated steel sheeting ofany gauge, thickness etc in roof coverings/cladding/eave etccomplete all as specified. 3 S&F galvanised corrugated mild steel sheeting, with two corrugation side lap fixed with L type or J type or cranked hooked bolts with washers in roof, 0.63mm thick, grade-O quality, with 120 grms/sqm zinc coating and grade B Class 8complete all as specified and directed by Engineer-in-Charge. 4 S&F Galvanised plain mild steel sheeting 0.63mm thickness fixed with L type or J or cranked hook boltes with washers, in roofs as in ridge etcall as specified and directed. 5 Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete. 6 M&L 25mm PCC 1:2:4 Type B-0 (Using 12:5mm stone agg) as in sub basefloor , complete all as directed and specified . 7 M&Lcoloured/printed ceramictiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.38 sqm,laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:6) including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge. 8 -ditto- but on verticalsurfaces such as skirting incl including 9 to10mm thick rendering in cement mortar 1:3 rough finish to receive the tiles complete all as specified and directed. 9 M&Lcoloured/printed non skid ceramic tiles 7 mm thick (squre/rectangular) area of each tile exc 0.11 but not exc 0.16 sqm laid in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement, complete all specified and directed. 10 M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of450x300x7mm / 350x 250x 7 mm / 450X 350X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. 11 M&L for 18-20mm thick granite stone (slab) of any colour/type,(table rubbed and polished) work as infloors/ vertical surfaces, cooking platforms and like, set in neat cementincluding pointing in white cementwith admixture of pigment to match with shade of granite, complete laid over and including 15mm thick screed bed in cement mortor (1:6) laid and jointed with gray cement slurry mixed with pigment, , complete all specified and directed. 12 Demolition of cement concrete to ground floor(unreinforced) and paving n.exc 15cm thickness (below or above ground level) and removing rubbish of out side MOD land, complete all as specified and directed. 13 M & L 75 mm thick PCC (1:3:6) type C-2 using 40mm graded aggregate as in plinth protection even and smooth without using extra cement complete all as specified and directed. 14 M&L 100mm thick Cement concrete 1:2:4 Type B-2 (using 40mm graded stone agreegate) as in sub base of flooring complete all as specified and directed. 15 M&L Chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment and including screed bed of 20mm thick in CM (1:4) etc.complete all as specified 16 Supply only Fine aggregate (sand) for sand cousioning 17 Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations. 18 Taking down(Steel/ Wooden) chowkhats of frames of any description n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and making good disturbed portion completeall as specified and directed. 19 All as per Srl Item No 17 here-in-before, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) and making good disturbed portion complete all as specified and directed. 20 Taking down shutters of any description exc. 1sqm and notexc. 2 sqm each, complete all as specified and directed. 21 S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colourPVC sheet reinforced with MS Square tube supply and fixing as specification and drawing. 22 S&F of factory Made Solid panel PVC door shutter, 28 to 30mm thick (stiles) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat mouldedand wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheetb eadingplain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing. 23 S&F 125 mm long stainless steel butt hinges medium weight with stainless steel screw complete. 24 S&F extruded aluminum alloy handles of size 150mm fabricated type anodised complete. 25 S&F Aluminium alloy anodised barrel towerbolts of extruded section 150 mm long and fixed complete. 26 S&FFloor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed. 27 S&F of 2nd class hard wood 35mm thick glazed and skeleton shutters for doors, openrebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats with all necessary fittings, complete all as specified and directed. 28 S&F of 2nd class hard wood 35mm thick,plain framed, panelled door shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats with all necessary fittings all as specified & directed. 29 Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 30 Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 31 S&F for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads/ MS square tube in square panes notexc 0.50 sqm each fixed with steel frame work complete all as specified and directed. 32 S&F factory made steel box type window with fly proof shutters having box type frame and shutters including MS grill of 10mm sq bar welded with FI frame and 4.8mm thick double glazing securing with 10mm MS hollow section with rubber gasket and all connected accessories complete all as specified.Note:- Glazing and fly proofing shall be measured and paid for separately against relevent items of this shedule.(Ref Drawing -CEAF/AF/SK-96/2019/WIN dt 15 May 2019.) 33 S&F factory made steel box type ventilator having box type frame and shutters including MS grill of 10mm sq bar welded with FI frame and 4.8mm thick double glazing securing with 10mm MS hollow section with rubber gasket and all connected accessories complete all as specified.Note:- Glazing and fly proofing shall be measured and paid for separately against relevent items of this shedule.(Ref Drawing -CEAF/AF/SK-96/2019/WIN dt 15 May 2019.) 34 M&L for 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane incluing Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed. 35 M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane including Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips complete all as specified and directed. 36 S & F stainless steelwire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete. 37 S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed by the Engineer-in-Charge . 38 S & F Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mmfor doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applyinga shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed.by the Engineer-in-Charge . 39 S&FMild steel hold fast made of flat ironconforming to 410-0 or Fe-310-0 compelete all as specified. 40 PCC 1:3:6 type c-0 (using 12.5mm graded crush stone agg) in back filling of pressed steel door frame and bed block for hold fast complete. 41 Dismantling wall and ceilingboards (fibre pulp, insulation, etc) or insulation board/slabs/blankets any thicknessincludinggrid work/aluminium frame work, cover fillets complete all as specified. 42 Framed work as in false ceiling, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering.Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 A quality grade, all as specified and directed. 43 Prelaminated particle board 12mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white laminationas in false ceiling fixedto Mild steel/ timber frame complete all as specified 44 S&F in repairs, 18 mm thick Pre-laminated HD HMR board, both side laminated with teak finished with nails /screws as in kitchen cabinet/shelves/shutter including 6 mm thick thick teak wood beads all around complete all as specified and directed. 45 S&F in repairs, 18/19 mm thick Pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as cup boards shelves,partition etc complete. 46 S&F in repairs mild Steel 300mm, ordinary rat tail rod pattern springs including roller & roller plate complete fixed with screw or by welding complete all as specified and directed. 47 Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed 48 M&L Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed. 49 Brick work with old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (1 cement : 4 coarse sand), all as specified. 50 Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and as directed. 51 M&L for rendering 10 mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6as per manufacturers instruction, finished fair and even without using extracement complete all as specified and directed. 52 M & L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 on wall surfaces, finishing the surface even and smooth without using extra Cementcomplete all as specified.Note:- Intgral water proofing compound shall be measured and paid for separately. 53 M&L for rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished Even and Smooth without using extra Cement complete specified. 54 Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed. 55 M&L preparation of newly plastered wall surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturers instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. 56 M&L for preparation of newly plastered ceiling surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturers instruction on new surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. 57 M&L preparation of old plastered ceiling surface and applying ofBirla/JK white wall putty approx 3 mm thick in two layeras per manufacturers instruction on old surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper overa coat of primercomplete all as specified and directed. 58 Preparing newplastered or un-plastered surfaces of walls and applyingtwo coats Acrylic exterier emulsion paint in camouflaging (Disruptive) pattern (Green, Grey & Brown colour) over a coat of acrylic primer complete all as specified and directed. (Make:Asian/Berger/Nerolac/ICI/Shalimar/Garware/Johnson). 59 Preparing old plastered or un-plastered surfaces of wallsby scraping the surfaces, brooming down or steel wire brushing down smoke soot, mould, moss and efflorescence salts and trading oil and greasy spotsetc and applying two coat of exterior acrylicemulsion paint in camouflaging (Disruptive) pattern in three colours(Green, grey and brown), complete all as specified and directed.Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson. 60 Preparation of new surfaces of steel or iron work or CGI/ PGI sheeting in walls or roofing, over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint in camouflaging (Disruptive) pattern in three colours(Green, grey and brown) over a coat of acrylic primer complete all as specified and directed. Make : Asian/ Berger/ Nerolac/ ICI/ Shalimar/ Johnson 61 1.5 mm thick stainless steel telescopic channel of size 30mm wide for sliding drawer at extended length with all necessary fixing arrangement to the drawer/wall complete all as specified and directed. 62 S & F continous (piano) hinges mild steel, 40mm width of flaps (when open),bright finish or electrogalvanised in repair. 63 S&F for size 75mm Brass handles, cast type, polished bright complete all as directed by Engr-In-Charge. 64 S&F for ball catcher for cupboard/cabinet etc complete all as specified and directed. 65 S & F in reparis Stainless Steel Wall Mount Case with Soap Dish & Bruch Holder fixed to wall all as specified and directed by Engr-in-Charge . 66 S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) 67 S&FCP health faucet of 1.25Mtr long CP flexable tube with necessary fittings complete all as specified and directed. 68 Demolition of cement concrete (reinforced) to Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. 69 M&L RCC (nominal mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like Type B1 1:2:4 (20 mm gradded aggregate) complete all specified and directed. 70 S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all specified and directed. 71 Formwork to sides and soffits of floor orslab, roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc 72 S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified anddirected. 73 S&F stainless steel plate rack of 1 mm thick for kitchen includingfixing cantilever brackets ,overall size900mmx750mmx250 mm all as specified and directed by Engineer in Charge. 74 S & F in repair curtain rails of stainless steel with fixing brackets, stops, rollers,funnels etc complete. 75 S&F in repair PVC flushing cistern 10 ltr capacity white with all internal fittings including brackets PVC connection 45cm long including nut and PVC washer at both ends including 32mm bore PVC long bend flush pipe 90cm long complete all as specified and directed. 76 S&F in repair Vitreous China wash down water closet (pedestal pattern), White/coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover andchromium plated jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of plain cement concrete M-15, type B-I, using 20mm graded crushed stone aggregate, fixed in repairs complete all as specified and directed. 77 S & F Vitreous china wash hand basin coloured, flat back type of size 550mm x 400mm including waste pipe & plug, porcelain stopper, 32mm dia PVC waste pipe with CP brass coupling and set of bracket complete all as specified and directed. 78 M& L preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 79 M& L for proparation of old wood and Wood based surfaces, of any description, not otherise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 80 M&L for preparing of new or previous untreated steel surfaces over 10cm width or girth and making good including primer and make the surface smooth by rubbing with sand papers etc andapplying two coat of synthetic enamel paint completeall as specified and directed. 81 M&L for preparing of old painted steel surfaces over 10cm width or girth and making good with & including by necessary red lead puttyand make the surface smooth by rubbing with sand papers etc andapplying one coat of synthetic enamel paint on old prepared surfaces ofsteel completeall as specified and directed. 82 Taking up or down 15 mm dia steel tubing in wall, ceiling or floor and connections,including cleaning for refixing or removal to storeetccomplete. 83 All as item No. 90 above but 20 mm dia of pipe. 84 S&F 15 mm dia medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors. 85 All as per item No. 83 above but bore of pipe 20mm dia pipe. 86 Refixing15 mm dia old steel tubing and connections in new or old position(wall,ceiling,floors,etc.) 87 All as per item No. 85 above but bore of pipe 20mm dia pipe. 88 Cutting chases,pinning for concealed water tubing andmaking good to facing where required and pointing in cement mortar 1:3 ,cutting exc 10cm but n.exc 20cm girth all as specified and as directed. 89 M & L for Lagging to 20mm dia pipes used in internal water supply or plumbing all round with, 40 min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum all as specified and directed. 90 S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 91 S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long betweenflanges with chromium plated bracket and fixed all as directed. 92 S&F 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical double layered with closed top) duly provided with necessary fittings/ fixtures for connecting inlet, outlet, washout and overflow pipes; hoisted and fixed in position incl dismantling PVC water sotrage tanks of capacity more than 250 to 500 litres capacity complete all as specified and directed. 93 S&F600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 94 S&F in repair bathroom Cabinet PVC /ABS body of size 350x450mmx125mm of approved quality Make Commander/Prayag. Of cat part no 551 & equivalent 95 S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. 96 S&FFloor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long complete all as specified and directed. 97 S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Rangepremium quality all as specifed and directed by Engr-in-Charge . 98 S&F in repair 15mm dia 450mmlong PVC connection with brass nut and washer complete all as specified and directed. 99 S&F in repair 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule complete. 100 S&F in repair stop valve/angle valve,fancy type, chromium plated, cast copper alloy screwed down,high pressure, with crutch or butterfly handle of 15mm dia. Screwed both ends for iron pipe or for unions and fixed. all as specifid & directed. 101 S & F in repairs Stop cock/two way Stop 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions. 102 S&F in repair Brass CP central hole wash basin mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed. 103 S&F in repair Brass CP sink mixer for hot & cold for 15mm dia complete fixed to connection as specified and directed. 104 S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. 105 Supply and fixingin repairShower Rosebrass cromium plated 125mm size with armsuitable for 15mm dia pipe all as specified and as directed. 106 Dismantling ofPVC drain pipes, jointed in cement mortar and taking out of renches, if required complete all as specified and directed. 107 S&F PVC (SWR) pipes single socketed,110mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. 108 S&F PVC (SWR) pipes single socketed,75mm bore, in any length with rubber ring joints fixed to wall and floor, complete all as specified and directed. 109 PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. 110 PVC (SWR) 110mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. 111 PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. 112 PVC (SWR) 110mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed. 113 PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. 114 PVC (SWR) 110mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as specified and directed. 115 S & F PVC (SWR) vent cowl, size of bore 75mm complete. 116 S&F in repairs CP grating round suitable for 110 mm dia and connecting up, fixed in repairs. 117 M&L PVC (SWR) floor trap 110 mm dia including jointing with solvent cement complete. 118 M&L PVC (SWR) Gully trap 125/110 mm setting and jointing with solvent cement complete. 119 S&F 75mm dia Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. 120 S&F 100mm dia Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. 121 Dismantling post or struts (wood,steel or RCC) any section,including taking out embedded portion and making good disturbed ground, complete all as specified and directed. 122 Excavation in post holes (or similar holes ) each n. exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with erath around in layer n.exc 25cm, watering and removing surplus soil to a distance n. exc 50M and making good surfaces in any type of soil. 123 Returning,filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm, in any type of soil complete all as specified and directed. 124 Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point. 125 M&L cement concrete in foundation filling and massconcrete type D2 1:3:6 (using 40mm graded Agg) in post holes all as specified. 126 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. 127 Internal Electric Supply 128 Taking down carefully aluminium/copper point wiring (light, bell, fan, socket) complete including fixture and fittings such as switches, ceiling roses, regulators, sockets, holder, fittings and terminal box sheets complete, stacking material at site and making good the disturbed surface of walls/ floors to match with existing surface complete all as specified and directed by Engr-in-Charge . 129 M&L for point wiring with two single core PVC insulated, unsheathed, FRLS type, 1100 volts grade, multistranded copper conductor cable 1.5 sqmm in and including PVC casing caping ISI marked with all connected accessories including one single core multistanded PVC insulated, unsheathed, FRLS type, 1100 volts grade,1.5 sqmm copper conductor cableunsheathed as earth continuity cable including concealed pressed steel GI terminal boxes of suitable way with 3 mm thicklaminated sheed cover for mounting of switches, socket, fan regulators, connected to common earth dolly complete all as specified for the following:- (a)One light /fan/ point controlled by one nos, one way 5/6 Amps switch. 130 All as per srl item no 2.00 here-in-before but One bell point controlled by one bell push 131 All as per srl item no2 here-in-before but One 3/5 pin socket outlet, 5/6 Amp on the same board controlled by one nos, one way switch. 132 All as per srl item no 2 here-in-before butOne 3/5 pin socket outlet, 5/6 Amp, independent controlled by one nos, one way switch. 133 All as per srl item No 2.00 here-in-before but using cable of size 2.5 sqmm (for phase & neutral) and 2.5 sqmm as continuous earth cable for 15/16 Amps socket outlet, independent controlled by one nos, one way switch complete all as specified. 134 S&F in replacement of piano type switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified. 135 S&F in replacement of piano type bell push switch one way, SP, flush type, 5/6 Amps, 230 volts AC, 50 Hz complete all as specified. 136 S&F in replacement of piano type socket outlet flush type, 3 pin 2-in-1, 5/6 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. 137 S&F in replacement of piano type switch socket combination flush type, 2-in-1 3 pin, 6/16 Amps, 230 volts AC, 50 Hz, multipurpose type complete all as specified. 138 S&F in replacement of electronic type ceiling fan regulator, 230 volts, single phase, flush type complete all as specified. 139 S&F in replacement of ceiling rose 3 terminals, PVC/polycarbonate/bakelite, isolated body 230 volts AC, 50 Hz complete all as specified. 140 S&F in replacement of electric call bell ding dong type suitable for 230 volts, single phase AC supply all as specified. 141 S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 4 sqmm complete drawn in and includindg casing caping ISI marked of suitable size and its accessories along with 1x 4.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. 142 S&F in replacement of wiring for submain with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in existing conduit along with 1x 6.0 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface complete all as specified. 143 S&F in replacement of sheet metal enclosure DB TPN 4 way, double door, 415 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB TP/TPN as incomer & MCB SPN as outgoing complete all as specified. Make: Havells/L&T/Legrand 144 S&F in replacement of MCBs, TPN, 40-100 Amps, 415 volts, 10 kA rupturing capacity, C curve type, complete all as specified and directed. 145 S&F in replacement of MCBs, SPN, 32 Amp, 230 volts, 10 kA rupturing capacity, C curve type complete all as specified. 146 S&F in replacement of sheet metal enclosure DB SPN 8 way, double door, 240 volts AC, surface mounting complete with suitable busbar, neutral link & earth link suitable for MCB DP/SPN as incomer & MCB SP as outgoing complete all as specified. 147 S&F in replacement of MCBs, SP, 6-32 Amps, 230 volts,10 kA rupturing capacity, C curve type complete all as specified. 148 S&F in replacementLED tube light fitting 1x20 watts, 220 volts AC, 1200 mm, with aluminium housing & integrated electronic driver complete with driver with polycarbonate diffuser & thd< 10% including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified. Make- Havells/Phillips/Wipro 149 S&F in replacement of LED bulk head light fittings of capacity 10 W weather proof, anti corrosion wall/ceiling mounted opel colour decorative, round/oval shape with PC cover including 3 core conductor cable for connection complete with all accessories all as specified. make: bajaj/philips/crompton/wipro 150 S&F in replacement of LED tube light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC , 6500K colour temprature decorative type with three core flexible copper conductor cable of suitable size complete all as specified.Make: Phlilips pride plus neo LHEXACP7IN1W010/bajaj/crompton 151 S&F in replacement of LED wall light fittings 6/7 watt, 230 volts AC, indoor type made up of polycarbonate complete with lamp holder , LED lamp 6/7 watts, 4000 K, LED driver, connector block pre wired with all accessories all as specified. 152 M&L for taking down existing fan from fan rod and removing old/burnt winding, cleaning of slots/pitches by using cleaning material by removing the insulating materials and then rewinding (i.e renewal of winding) the fans with appropriate/same gauge of super enamelled copper wire and insulating material, varnishing, drying the winding for adequate periodto remove the moisture content and strengthening the winding and testing to the speed and flow of the fans any make all as specified for the following type of fans:-(a)Ceiling fan 1200/1400 mm sweep 153 M&L for overhauling of fan of any type and any make by opening, cleaning, greasing, oiling of fan motor after testing the faults including replacement of minor parts and re-assembling complete all as specified. (Note: Spare parts & winding shall be measured and paid separately). 154 S&F in replacement of ball bearing suitable for ceiling/exhaust/cabin/wall/pedestrial fan of any type/make/size all as specified. 155 S&F in replacement offan capacitor with wire terminals of capacity 2.5 Mfd, 230 volts AC all as specified. 156 M&L for taking down existing exhaust fanupto 280 mm sweep safely including replacement of ball bearing, painting with synthetic oil based paint after cleaning the metal surface and refixing the same with new complete all as specified and as directed. 157 M&L for fixing of steel louvers with aluminium flaps self opening type of size suitable to accommodate exhasut fan of suitable size for fixing on wall along with gitties and screws. Complete all as specified and as directed. 158 M&L for taking down existing Geyser of any capacityand submitted toE/Msubdivision with all the connected accessories, all as per direction of engr-in-charge. 159 S&Fsheet metal steel plug & socket DB SP with metal clad 2 pin & earth plug and socket SP 20 Amps, 230 volts AC, surface mounting type complete with one MCB SP, 20 Amps, 10 kA complete all as specified. 160 Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. Make-Bajaj/ Racold/ Havells/ Crompton 161 Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)and making good disturbed surfaces by cement mortar along with fixing with help of hole fastener including hanging arrangement. Complete all as specifed and as directed. 162 M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI wire 4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board /panel/ test point at the other including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified. 163 S&F in replacement LED building security light 35 Watt or higher, IP 66 with battery back up, Auto on/off/dimmFunctioning as per product TDS complete all including and connecting up including mountingincluding GI pipeof suitable dia and clamps, nut, bolts, washers with all accessories. Make- Halonix HLSLD-ML04-30-CWL-INV-RTC-R/Havells/ Wipro 164 Supply , Laying and testing cable XLPE insulated, Screened, PVC bedded,galvanized steel strip orwire armoured electric power cable (heavy duty ) 1100 Volts grade with satndard aluminium conductor of size 25 sqmm 4 Core. 165 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of new/serviceable cables or for fault finding in existing cable and getting out soil in soft/loose soil complete all as specifed. 166 Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm complete all as specified. 167 Removing excavated material not exceeding 50 mtr and depositing where directed in a level not exceeding 1.5 mtr above the starting point of any type of soil complete all as specified 168 M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid. 169 M&L for well burnt sub class B bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick complete all as specified. 170 S&FGI tubing 40mm bore medium grade with all fitting and fixed complete to walls and ceilings or laid in floorwith all as specified and directed. 171 S&F Anti suicide fan rod for ceiling fan with all fitting and fixed complete all specified and as directed. 172 M&L for making hole on both side of the walls to accomodate the GI pipe of size 40 mm and making good the disturbed surface after the installation of the pipe by masonary as well as plastering work complete all as specified and as directed.
