|
| 1 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanitycounters,windowsills,faciasandsimilarlocationsof required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby redArea of slab over 0.50 sqm |
| 2 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work |
| 3 | Providing and fixing 2nd class teak wood plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface.25 mm thick |
| 4 | Providing and fixing factory made uPVC glazed/ wire mesh windows/doorscomprisingofleadfreeuPVCmulti- chamberedframe,sashandmullion/coupler(wherever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (whereever required) of appropriate dimension, EPDM gasket, hardware,SS 304 grade fasteners of minimum 8 mm dia. with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as perIS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steelscrewsetc.Profileofframe,sash&mullion(if required) shall be mitred cut and fusion welded/ mechanicallyjointeddulysealedat allcorners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification &direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh/ Glazing of plain/ toughened/ laminated/ double glass unit with/ without high performance coatings as per design TwotracktwopanelsslidingwindowwithAluminium channel for roller track, wool pile, nylon rollers with SS 304 body. requirementsandconformingtoIS: 3548&IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute,to be provided by the manufacturer for : (iii)Siteswith basic wind speed > 45 m/sec as per IS 875 - Part 3 (iv) Sites with structure height more than 20m for all wind speeds.Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter). |
| 5 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 6 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm. |
| 7 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 8 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 9 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately):Flat surfaces |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 11 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats |
| 12 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/ 120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 13 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area 3 sq. metres and below |
| 14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 15 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 16 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 17 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 18 | Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomandsideswithrequiredEPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 19 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer(dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. |
| 20 | NSR Plumbing (Premium quality)EWCProviding and fixing EWC continental of Jaquar (Code cns-wht-551-ssl) or equivalent quality ofRoca, Grohe, Kohler, Hindware make WC size 480x365x400 mm all completework as per instruction of Engineer in charge. |
| 21 | Wash basin Table top wash basin Providing and fixing Table top wash basin ( Jaquar make) Cat No ARSWHT 39903 complete as per instruction of Engineer in Charge.. |
| 22 | Health Fauce Providing and fixing health faucet of AlliedJaquar(Code ALD-577) orequivalent qualityof Roca, Grohe, Kohler, Hindware make all complete work as per instruction of Engineer in charge. |
| 23 | SS Bib cock Providing and fixing2 way bibcock of Aria Jaquar make (Code ARI-39041) or equivalent quality of Roca, Grohe, Kohler,Hindware all complete work as per instruction of Engineer in charge. |
| 24 | Providing and fixing bibcock of continental Jaquar(Code CON-047KN) or equivalent quality of Roca, Grohe, Kohler, Hindware make all complete workas per inst. of EIC. |
| 25 | Pillar cock Providing and fixingquarter turn pillar cock of KubixJaquar(Code KUP-35001PM) or equivalent quality ofRoca, Grohe, Kohler, Hindware make all complete workas per instruction of Engineer in charge. |
| 26 | Dispensor Providing and fixing Soap dispenser of continentalJaquar(Code CAN-1135N) or equivalent quality of Roca, Grohe, Kohler, Hindware makeall complete workas per instruction of Engineer in charge. |
| 27 | Providing and fixingPaper holder of continentalJaquar make (Code ACN-1153N) or equivalent quality ofRoca, Grohe, Kohler, Hindware makeall complete work as per instruction of Engineer in charge. |
| 28 | Providing and fixing two way angle cock of approved quality. |
| 29 | Providing and fixing PVC Connection pipe of Jaquar make code(ALD-8058) or equivalent quality of Roca, Grohe, Kohler, Hindware makeof size 580x445x260mm all complete work as per inst. of EIC. |
| 30 | P&F Waste pipe for Wash Basin and Urinal of Standard make all Complete etc.as per instruction of EIC |
| 31 | Providing and fixing Towel ring square of Jaquar(Code AKP-35721P) or equivalent quality of Roca, Grohe , Kohler,Hindwareall completework as per inst. of EIC. |
| 32 | Providing & fixing decorative900 mm × 600 mmsize mirror with 2\" ornamental teak wood beading and 18 mm ISI water and termite proof ply board backing. |
| 33 | Providing and fixing glass self ( Jaquar make) Cat No 7771, complete as per instruction of Engineer in Charge. |
| 34 | Dismentaling and re errecting wooden flush door including cost of minor repair & cutting of height, width including cost of sundries ( screw, nails, adhesive etc) as per instruction of Engineer in Charge.. |
| 35 | Frameless door Providing and fixing fittings to frame less glass doorEnox top patch SS finish or equivalent |
| 36 | Frameless doorProviding and fixing fittings to frame less glass doorEnox bottom patch SS fitting or equivalent |
| 37 | Frameless doorProviding and fixing fittings to frame less glass doorEnox pivot code 712 SS finish or equivalent |
| 38 | Frameless door Providing and fixing fittings to frame less glass doorEnox handle (Code-1118) 25 mm dia and 450 mm long SS finish or equivalent |
| 39 | Frameless doorProviding and fixing fittings to frame less glass doorEnox Centre lock Code 706 SS finish or equivalent |
| 40 | Frameless doorProviding and fixing fittings to frame less glass doorEnox strike box for center lock code 800 or equivalent |
| 41 | Frameless door Providing and fixing fittings to frame less glass doorEnox floor spring code FH 843 or equivalent |
| 42 | Providing and fixing 12 mm thick frameless toughened glass door of Saint Gobain or equivalent itched both side shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). |
| 43 | Ply wood/ Lamination Providing & fixing ISI grade plywood including cost of all sundries as per direction of Engineer In charge .18 mm thich ply |
| 44 | Ply wood/ Lamination Providing & fixing ISI grade plywood including cost of all sundries as per direction of Engineer In charge5 ply 6 mm thick |
| 45 | Providing & fixing of laminates etcincluding cost of all sundries as per direction of Engg . In charge Textured matt finish laminate 0.8 mm . |
| 46 | Wooden laminate, tongued and grooved in flooring, including fixing with iron screws complete.Matt finish 8 mm thickness |
| 47 | Providing & Fixing of LED panel 18 W Round/square shape with cutting of false ceiling complete as per instruction of Engineer in charge |
| 48 | Providing & fixing of Rope/Strip light LED for false ceiling as per instruction of Engineer in charge |
| 49 | P& F wall paper of approved brand |
| 50 | Total Impact of GST for the Purpose of CTC |
