Tender For Construction Work Of Record Room On The Fifth Floor Of The Old Building Of The Authority Office - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 2023- 13.88 2 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:, New work (two or more coats) over and including Water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.DSR 2023- 13.41.1 3 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge., With cement mortar 1:4 (1 cement : 4 fine sand).DSR 2023- 14.1.1 4 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds., Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body., Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body., Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m).DSR 2023- 9.147.A4.2 5 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.DSR 2023- 8.6 6 Supply of labour for different type of work PSR (Attached) 7 Providing & fixing of 12 mm Toughened Glass Door with all hardware as per design with edge polish m/c top and bottom pivot and bottom lock with handle all complete as per drawing, specification and direction as approved by Engineer -in-Charge. PSR 8 Toughened glass 12 mm thickness DSR 8778 9 Stainless steel wire guage (Grade-304) aperture 1.4 mm and 0.50mm dia wire DSR 8737 10 Weather Silicon sealant DSR 8646 11 Providing & Making & Fixing of Storage Cabinet madeof 19MM Board, having shelves & shutters & teak wood beading & finished surface of 1MM Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge. MR 12 Optimizer Plus-Drive Type (4 nos): Optz Plus SD2-1QTY; Optz Plus TD2 Solid back panel- 2QTY (1200W, 400D, 2361H); Optz Plus Hinge door pair 1200mm 2361mm PS-2QTY; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY Optimizer Plus-Drive Type (1 nos): Optz Plus SD2-1QTY; Optz Plus LD2-1QTY; Optz Plus TD2 Solid back panel- 6QTY (1200W, 400D, 2361H); Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-2QTY; Optz Plus D2 CHNL 800mm-1QTY APO 1050 W (2 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 1050 SD2-1QTY; 2 Bay Drive Type 1050 LD2-1QTY; 2 Bay Drive Type 1050 TD2-4QTY; 1050W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY APO 1050 W (1 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 1050 SD2-1QTY; 2 Bay Drive Type 1050 LD2-1QTY; 2 Bay Drive Type 1050 TD2-2QTY; 1050W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY APO 1050 W (1 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 1050 SD2-1QTY; 2 Bay Drive Type 1050 LD2-1QTY; 2 Bay Drive Type 1050 TD2-3QTY; 1050W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-1QTY APO 1050 W (1 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 1050 SD2-1QTY; 2 Bay Drive Type 1050 LD2-1QTY; 2 Bay Drive Type 1050 TD2-1QTY; 1050W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY APO 1050 W (1 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 1050 SD2-1QTY; 2 Bay Drive Type 1050 LD2-1QTY; 2 Bay Drive Type 1050 TD2-6QTY; 1050W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY APO 900 W (2 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 900 SD2-1QTY; 2 Bay Drive Type 900 LD2-1QTY; 2 Bay Drive Type 900 TD2-2QTY; 900W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY APO 900 W (3 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 900 SD2-1QTY; 2 Bay Drive Type 900 LD2-1QTY; 2 Bay Drive Type 900 TD2-4QTY; 900W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-1QTY; Optz Plus D2 CHNL 800mm-1QTY APO 900 W (1 nos): Optimizer Plus-Drive Type; 2 Bay Drive Type 900 SD2-1QTY; 2 Bay Drive Type 900 LD2-1QTY; 2 Bay Drive Type 900 TD2-3QTY; 900W x 400D x 2361H; Channels (Rails); Optz Plus D2 CHNL 2400mm-1QTY; Optz Plus D2 CHNL 1600mm-1QTY 13 S/F of Rollar blind etc. all complete work. PSR 14 Wiring Points in Surface Conduit with PVC insulated 1100 V grade cable, Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .SOR 2018 (E-M)- 1.1.121(B) 15 Wiring Points in Surface Conduit with PVC insulated 1100 V grade cable, Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.SOR 2018 (E-M)- 1.1.123 (B) 16 Wiring Points in Surface Conduit with PVC insulated 1100 V grade cable, Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe on surface,complete with 14 SWG copper earth continuity wire , GP Box and piano type switch and socket etc. complete in all respect.SOR 2018 (E-M)- 1.1.124(B) 17 G.P. Switch Boxes, Supply and fixing of switch box 100 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.SOR 2018 (E-M)- 1.4 (C).159 18 Laying of conduit pipes in wall for total concealed light fan, plug points and for concealed sub mains, Same as in item 148, but 25mm dia 16 SWG (1.5 mm) thick rigid steel conduit.SOR 2018 (E-M)- 1.4 (B).149 19 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve, CAT A SOR 2018 (E-M)- 10.1002.a 20 S&F of 0.5 Amp to 5 Amp. SP MCB (10KA) C Curve, CAT A SOR 2018 (E-M)- 10.1001.a 21 S&F of 50 Amp to 63 Amp. SPMCB (10KA), CAT A SOR 2018 (E-M)- 10.1003 (B).a 22 S & F surface/Flush mounting 6ways V TPN distribution board without additional Door without MCB complete in all respect,as directed at site by Engineer in charge., CAT A SOR 2018 (E-M)- 10.1027 (B).a 23 S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge., CAT A SOR 2018 (E-M)- 10.1024 (A).a 24 Supply, installation and testing of DC lights (15W to 18W) - RR/529 25 Supply, Installation, Testing and Commissioning of 1200 mm sweep, DC Ceiling/Wall Fans - RR/527 26 Supply and fixing of 1.5 Ton 5 Star Split unit A/C. - DSR E/M 2018 1503B(i) 27 S&F of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal Magnetic release, CAT A SOR 2018 (E-M)- 10.1021.a 28 1- Submain in conduit on surface (2.5 sq. mm.) Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia. heavy guage rigid steel conduit on surface, with one number 14 SWG copper earth continuity wire etc, complete in all respect. SOR 2018 (E-M)- 13.1301(B) 29 1- Submain in conduit on surface (2.5 sq. mm.) As in item no.1301(B) but in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. SOR 2018 (E-M)- 13.1301(C) 30 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast alumínium housing body with extended heat sink and diffuser of Special Polycarbonate material and driver set complete in all respect. - SW/65 31 PVC insulated industrial cables flexible 1100 volts HR-FR-LSH single core unsheathed: 50 sq.mm 32 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge DSR 2023- 15.19 33 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50metres lead :, Thickness above 25 mm up to 40 mm DSR 2023- 15.39.3 34 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. DSR 2023- 15.57 35 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DSR 2023- 15.60 36 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :, Of area 3 sq. metres and below DSR 2023- 15.12.1
