Tender For Second Call For Repairing Work At Thana Sirshi, Guna-Madhya Pradesh

Tender For Second Call For Repairing Work At Thana Sirshi; 1 15.2 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. 15.2.1 Nominal concrete 1:3:6 ог richer mix (i/c equivalent design mix). 1 14.00 14.00 0.05 9.80 9.80 CUM 578 5664 2 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) 14.00 14.00 0.05 9.80 9.80 CUM 6569 64376 3 22.14.2 Сement mortar 1:3 (1 cement: 3 sand) 14.00 14.00 0.012 2.35 2.35 CUM 9308 21892 4 14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead: 14.1.1 With cement mortar 1:4 (1 cement: 4 sand) 5 14.29 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: 14.29.1 Old work (one or more coats) 4 0.60 2.40 5.76 4 0.60 2.20 5.28 4 0.40 2.80 4.48 4 0.50 2.40 4.80 4 0.40 2.80 4.48 24.80 SQM 180 4464 2 3.20 2.80 17.92 2 3.00 2.80 16.80 4.30 2.80 24.08 2 4.20 2.80 23.52 2 3,00 2.80 16.80 2 3.10 2.80 17.36 2 3.00 2.80 16.80 3.00 2.80 16.80 2 2.50 2.80 14.00 2 1.50 2.80 8.40 2 1.50 2.80 8.40 2 3.00 2,80 16.80 2 2.30 3.60 16.56 2 3.30 3.00 19.80 2 3.10 2.60 16.12 2.00 3.00 12.00 2 1.50 3.60 10.80 2 3.30 3.00 19.80 2 4.50 1.20 10.80 1 5.50 2.80 15,40 1 6.50 2.80 18.20 2 3.20 3.60 23.04 4.50 3.00 27.00 9.70 1.20 11.64 6.70 2.80 18.76 5.40 30.24 5.00 3.60 36.00 7.50 3.00 45.00 3.20 1.20 7.68 536.52 SQM 21 11267 14.51 Finishing walls with Acrylic Smooth exterior paint of required shade: 14.51.1 Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface). 14.00 3.80 106.40 14.00 3.80 106.40 212.80 SOM 87.0 18514 paint of approved brand and manufacture to give an even shade: Two or more coats on new 7/work.13.64 Providing and applying white cement based putty ofaverage thickness 1 mm, of approved brand and manufacturer, Like birla white /JK white or equivalent, over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold 8 etc in all position complete.13.41 2.00 1.60 6.40 4 1.20 2.10 10.08 2 1.20 2.10 5.04 8 1.80 1.60 23.04 2 2.10 2.10 8.82 1.20 1.60 3.84 2 2.00 1.00 4.00 4 2.00 2.10 16.80 4 2.00 2.10 16.80 2 1.20 2.10 5.04 1.80 0.90 3.24 103.10 SQM 53 5464 3.20 2.80 17.92 3.00 2.80 16.80 2 4.30 2.80 24.08 4.20 2.80 2352 3.00 2.80 16.80 2 3.10 2.80 17.36 3.00 2.80 16.80 3.00 2.80 16.80 2.50 2.80 14.00 1.50 2.80 8.40 2 1.50 2.80 8.40 2 3.00 2.80 16.80 2.30 3.60 16.56 3.30 3.00 19.80 3.10 2.60 16.12 2 2.00 3.00 12.00 1.50 3.60 10.80 3.30 3.00 19.80 4.50 1.20 10.80 5.50 2.80 15.40 6.50 2.80 18.20 2 3.20 3.60 23.04 2 4.50 3.00 27.00 9.70 1.20 11.64 6.70 2.80 18.76 2 5.40 2.80 30.24 2 5.00 3.60 36.00 2 7.50 3.00 45.00 2 3.20 1.20 7.68 536.52 SQM 74 39702 nd fixing aluminium work ling and Iprovidinb windows, ventilators and for door with extruded built up partitions par dard tubular sections/appropriate starsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Clazina nanaling and dach fastanars 21.1.1 For Fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 11 assume weight 6 kg/sqm. For shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).S 21.1.2.2 Powder coated aluminium Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) :SOR 21.3/P-36 3 21.3.1 With float glass panes of 4.00 mm thickness

INR 1000 /-

INR 3.05 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB