Construction, Building Construction, Building Work, Civil Construction, False Celing, Furniture, Furniture Items, Partitions, lucknow-Uttar Pradesh

Special Repair To Maintenance Of Circle Office Campus With Material : Removal Of Existing Partitions & Its Disposal With In Distance Of 100 Mts. Including Stacking Of Useful Material For Reuse In Partition Work Which May Be About 50%, Providing And Fixing Of Aluminum Partition From Floor Level Up To The Evelof False Ceilling With Frame Work Of Aluminum Of Size 50x50 MM At, Wire, Cable, Switches etc,Spacing Not Exceeding 60 MM Center To Center In Vertical Direction Vertical Member To Be In One Piece), And Horizontal Direction 12 Mm Thick Comm. Ply To Be Fixed On Both Sides,Including Groves As Per Instruction And 1.0 Mm Laminate To Be Fixed On Both Sides, Item May Have 6 Mm Etched Glass Above 30 As Per Design. Measurement Of Height Shall Be Taken From Finished Floor Level Up To The Level Of False Ceilling, In Case Of Varying Heights On Either Side Of Partition,Average Height Shall Be Considered, The Rate To Include Provision Of Extra Frame Work As Necessary For Skirting And Making Cutouts For Electrical Switch Plates, Switch Boxes, Light Fittings Light Etc. Making Provision For Laying Conduit; As Per Drawing & Directions Of Architect. All Wood Framework To Be Applied With 2 Coats Of Fire Retardant Paint Of 1 Coat Of Wood Preservative With Anti Termite. Board/Ply With Gurjan Core Prime Grade Make Duro, Green, Century, Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm Both Side Inclusive) As Per IS : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6mm Thick With Flanges Of 27mm And 37mm, At 1200mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener ] 2.5mm Dia X 50mm Long With 6mm Dia Bolts Other Flange Of Cleat Fixed To The Angle Hangers Of 25x10x0.50mm Of Required Length With Nuts And Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45x15x0.9 Mm Running At The Rate Of 1200mm Centre To Centre To Which The Ceiling Section 0.5mm Thick Bottom Wedge 80mm With Tapered Flanges Of 26mm Each Having Lips Of 10,5mm, At 450mm Centre To Of Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64mm Dia X 32mm Long G.L Wire At Every Junction, Including Fixing Perimeter Channels 0.5mm Thick 27mm High Having Flange Of 20mm And 30mm Long, The Perimeter Of Ceiling Fix3ed To Wall/ Partition With The Help Of Rawl Plugs At 450mm Centre, With 25mm Long Dry Wall Screws @ 230,, Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25mm At 230mm C/C Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150mm Or Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Fully Perforated Gypsum Plaster Board Of Size 1200 X 2400 X 12.5mm Having Approx. 15% Perforated Area With Perforation Size And Pattern As Approved By The Engineer-In-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With NRC Value Not Less Than 0.60 DSR-12.45.4, Provision For Complete Electrical Works For Complete Area Excluding Air Conditioning As Per Approval For Architech.

INR 500 /-

INR 15958.0 /-

INR 6.38 Lakhs /-