Tender For Providing And Fixing Electrical Installation At Different Location In Bharat Mandapam, New Delhi; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C 2 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 4 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C 5 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 6 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group C 7 supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 8 5/6 A switch 9 15/16 A switch 10 3 pin 5/6 A socket outlet 11 6 pin 15/16 A socket outlet 12 supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 13 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 14 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm. FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 15 Supplying and fixing sutable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 16 Providing and fixing following rating and breaking capacity and pole MCCB with thermo magnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 17 63 A, 10 KA,TPMCCB Make: Schindler, ABB, L&T 18 100 A, 16 KA,TPMCCB Make: Schindler, ABB, L&T 19 200A, 25 KA, TPMCCB Make: Schindler, ABB, L&T 20 250A, 35 KA, TPMCCB Make: Schindler, ABB, L&T 21 400A, 35 KA, TPMCCB Make: Schindler, ABB, L&T 22 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 23 6 Way, Double door 24 12 way, Doble door 25 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 26 4 Way (4 + 12), Double door 27 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 28 Single pole 29 Double pole 30 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 31 63 A 32 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required 33 40 A 34 63 A 35 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/cable as required. 36 laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 37 Upto 35 sq. mm (clamped with 1 mm thick saddle) 38 Above 35 sq. mm. And upto 95 sq. mm. (clampled with 25x3mm MS flat clamp) 39 Above 185 sq. mm. and upto 400 sq. mm. (clampled with 25/40x3mm MS flat clamp) 40 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 41 3½ X 25 sq. mm. (28mm) 42 3½ X 50 sq. mm. (35mm) 43 3½ X 70 sq. mm. (38mm) 44 3½ X 300 sq. mm. (70mm) 45 Supplying of one number PVC insulated and PVC sheathed/ XPLE, Aluminium comnductor power cable of 1.1 KV garde of following sizes onsurface /recess etc as required 46 3½ X 25 sq. mm cable Make: Polycab, Plaza, Havells, KEI 47 3.5 x 50 SQ mm cable Make: Polycab, Plaza, Havells, KEI. 48 3.5 x 70 SQ mm cable Make: Polycab, Plaza, Havells, KEI. 49 Supply and fixing of ceiling fan of 1200mm, 220v, 50 HZ supply, white colour, corrosion resistant high performance fan with powder coated dynamically balanced blades, 100% copper winding motor, double ball bearing, stability and silent operation along with necessary accessories inclusive of providing upto 4 feet extra down rod with 1.5 sq. mm. FRLS insulated copper conductor single core cable and fixing the hook after making the hole in the ceiling and making the same good as required complete with testing and commissioning etc. Make: Crompton, Usha, Havells 50 Supply and fixing of heavy duty exhaust fan of 300mm sweep, 1400 rpm, 6 pole, 220v, 50 HZ supply in the existing opening including making the hole to suit the size of the above fan, making good the damage connection testing commissioning etc as required. 51 SITC of 1 x 20 Watt ultra bright LED tubelight (double side connection) with very high efficiency suited for installation in existing tubelight G13 lamp holders to give glare free light with regal batten for Led tube box type on ceiling/ wall including connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cale and earthing etc as required. 52 SITC of 2 x 20 Watt ultra bright LED tubelight (double side connection) complete with batten with very high efficiency suited for installation in existing tubelight G13 lamp holders to give glare free light with regal batten for LED tube box type on ceiling/ wall including connection with 1.5 sqmm FRLS PVC insulated copper conductor single core cale and earthing etc as required. Make: Wipro, Crompton, Havells. 53 SITC of Recess mounted LED 1x4 luminaire delivering an initial system lumen of 4500 lumens & the luminaire shall be with system efficacy ≥ 125 lm/W having system wattage between 34-36W. Housing & frame is made of CRCA with pre-treatment duly epoxy polyester powder coated (RAL9003) white. Optics: HET Diffuser and IP20 Protection. External driver tray is fixed on housing for easy access during maintenance. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be BIS Registered with isolated type electronic driver in polycarbonate / metal enclosure with input voltage range of 150 to 270V, THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be of same make and made in India for ease of repair and service. The LED shall be SMD type. Luminaire shall have surge protection of 3KV with High and Low Input Voltage Cutoff protection. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. The complete fitting should have a 5 years warranty. The old existing fittings are to be given in buy back way. The work should be complete as required in Pragati Maidan, New Delhi. Make: Wipro, Philips, Lighting Technologies, Havells. 54 Supplying of following rating PVC sheathed/ XLPE insulated, Aluminiumarmoured conductor power cable of 1.1 KV grade, extruded PVC Type ST2 sheathed, 650/ 1100v grade as per IS 7098 (Part 1) 1988 etc as required (Make: Havells, Polycab, RR Cables, KEI etc.) (i) 3.5 x 300 SQ mm cable 55 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc. As required, but excluding sand cushioning and protective covering. (i) Above 185 sq. mm and upto 400 sq. mm. 56 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – All work up to plinth level : (i) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 57 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer – in – charge.(i) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 58 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. (i) Bituminous portion 59 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required(i) 3.5 x 300 Sq. Mm. 60 Shifting the cubical panels having size 1700mmx1200mmx600mm after removal from the existing foundation in compact form along with disconnection of existing cables and repairing of damaged part, denting and painting with the existing colour after removal of rust and applying primer, making foundation 35 cm above ground level with cement concrete to another location, installation of cubical panel, connecting all the cables etc. complete as required. 61 Fabrication, supplying and installation of outdoor type slopping roof cubical feeder pillar of following surface area / size made out of CRCA MS sheet 2 mm thickness (14 SWG) duly compartmentalize having 4 strip aluminium bus bar of 400 Amp, 300 mm deep capacity double door with double locking arrangement and solid connection for MCCBs i/c internal wiring for VAF meter, CT, indicating light. Dust proof vermin process duly fixed on M.S. angle iron frame workof size 40mm x 40mm x 6mm thick (NS) 500 mm long legs, out of which 100 mm duly grouted in cement conceret foundation of 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size) powder coated with seven tank treatment in approved shade and colour complete etc. as required.(Make: Neptune, Tricolite, ADLEC, Platinum complete fitt) 62 suppling and fixing the following accessories in the above cubical panel board etc. as required. 63 Digital type Ampere/ Voltmeter/ frequency meter (Make : L&T Cat No. WL 411010OOOO) 64 Indication light LED type with 2 Amp. SP MCB (3 Nos.) - 1 set 65 Current Transformer (CT) 200/5 Amp. 66 Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required. 67 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (i) 120 mm dia (OD-120mm & ID-103mm nominal)
